PYLE Audio DVD Player PLDVD199XM User Manual

PLDVD199XM  
OWNER’S MANUAL  
Mobile Audio/Video System  
Digital Audio Out-Coaxial  
PLL Synthesizer Stereo Radio  
DVD Player  
Automatic Memory Storing  
Full Detachable Panel  
Preset Equalization  
Multi-subtitle Languages Function  
Multi-audio Languages Function  
Multi-angle Function  
Parental Control  
Remote Control  
XM Function  
 
CONTENTS  
Safety Information ........................................................................................4  
Disc Notes .....................................................................................................5  
Installation .....................................................................................................6  
Using the Detachable Front Panel .............................................................9  
Wiring Connection ......................................................................................10  
Location and Function of Keys..................................................................11  
The Player ....................................................................................................11  
Remote Control.............................................................................................12  
Remote Control...........................................................................................14  
Preparing the Remote Control......................................................................14  
Loading/Ejecting a disc..............................................................................14  
Loading a disc ..............................................................................................14  
Ejecting a disc...............................................................................................14  
Operation.....................................................................................................15  
Basic Operation ............................................................................................15  
Radio Operation............................................................................................16  
XM Operation................................................................................................16  
Disc (DVD/VCD/CD/MP3) Operation ............................................................17  
AV IN Operation ............................................................................................22  
Setup ...........................................................................................................23  
Initial Setup ...................................................................................................23  
General Setup...............................................................................................23  
Speaker Setup ..............................................................................................25  
Audio Setup ..................................................................................................25  
Preferences Setup ........................................................................................26  
Defaults Table ...............................................................................................29  
Trouble Shooting.........................................................................................30  
Specifications..............................................................................................31  
3
 
SAFETY INFORMATION  
CAUTION:  
Region Management Information  
Region Management Information:  
This Mobile DVD Player is designed and  
manufactured to respond to the Region  
Management Information that is recorded  
on a DVD disc. If the Region number  
described on the DVD disc does not  
correspond to the Region number of this  
Mobile DVD Player, this Mobile DVD  
Player cannot play this disc.  
MOBILE DVD PLAYER IS A CLASS I  
LASER PRODUCT. HOWEVER THIS  
MOBILE DVD PLAYER USES A  
VISIBLE/INVISIBLE LASER BEAM  
WHICH COULD CAUSE HAZARDOUS  
RADIATION EXPOSURE IF DIRECTED.  
BE SURE TO OPERATE THE MOBILE  
DVD PLAYER CORRECTLY AS  
INSTRUCTED.  
USE OF CONTROLS OR  
ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE  
SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
DO NOT OPEN COVERS AND - DO NOT  
REPAIR YOURSELF. REFER SERVICING  
TO QUALIFIED PERSONNEL.  
WARNING:  
• TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE  
THIS EQUIPMENT TO RAIN OR  
MOISTURE.  
• TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, AND ANNOYING  
INTERFERENCE, USE ONLY THE  
RECOMMENDED ACCESSORIES.  
• THIS DEVICE IS INTENDED FOR  
CONTINUOUS OPERATION.  
This product incorporates copyright  
protection technology that is protected  
by method claims of certain U.S. patents  
and other intellectual property rights  
owned by Macrovision Corporation and  
other rights owners. Use of this  
copyright protection technology must be  
authorized by Macrovision Corporation,  
and is intended for home and other  
limited viewing uses only unless  
otherwise authorized by Macrovision  
Corporation. Reverse engineering or  
disassembly is prohibited.  
4
 
DISC NOTES  
Disc formats supported by this player  
Note these scratches are not an  
indication of any problem with the player.  
DVD  
12 cm disc  
Label side up  
Video CD  
12 cm disc  
Do not touch  
the underside  
of the disc  
CD  
12 cm disc  
MP3  
12 cm disc  
Do not bend  
Discs which cannot be played with this  
player  
• DVD-ROM  
• DVD-R/DVD-RAM  
• CDV  
• CD-G  
Wipe the disc from center  
toward the outside edge  
Handling and Cleaning  
• Dirt, dust, scratches and warping disc  
will cause misoperation.  
• Do not place stickers or make  
scratches on discs.  
Preparing New Discs with Rough  
Spots  
A new disc may have rough edges on its  
inside and outside edges. If a disc with  
rough edges is used, the proper setting  
will not be performed and the player will  
not play the disc. Therefore, remove the  
rough edges in advance by using a ball  
point pen or pencil as shown on the right.  
To remove the rough edges, press the  
side of the pen or pencil against the  
inside and outside edges of the disc.  
• Do not warp discs.  
• A disc should always be kept in its  
case when not in use to prevent from  
damaging.  
• Do not place discs in the following  
places:  
1. Direct sunlight  
2. Dirty, dusty and damp areas  
3. Near car heaters  
4. On the seats or dashboard  
Rough spots on  
outside edge  
Disc Cleaning  
Use a dry soft cloth to wipe the surface.  
If the disc is quite dirty, use a soft cloth  
slightly moistured with isopropyl (rubbing)  
alcohol. Never use solvents such as  
benzine, thinner or conventional record  
cleaners as they may mar the surface of  
the disc.  
Ball point pen  
or pencil  
Note:  
A disc may become somewhat scratched  
(although not enough to make it  
unusable) depending on your handle it  
and conditions in the usage environment.  
Rough spots  
on inside edge  
5
 
INSTALLATION  
Notes:  
DIN FRONT-MOUNT (Method A)  
Installation Opening  
• Choose the mounting location where  
the unit will not interfere with the  
normal driving function of the driver.  
This unit can be installed in any dashboard  
having an opening as shown below:  
• Before finally installing the unit,  
connect the wiring temporarily and  
make sure it is all connected up  
properly and the unit and the system  
work properly.  
53 mm  
182 mm  
Installing the unit  
• Use only the parts included with the  
unit to ensure proper installation.  
The use of unauthorized parts can  
cause malfunctions.  
Be sure you test all connections first, and  
then follow these steps to install the unit.  
1. Make sure the ignition is turned off,  
and then disconnect the cable from  
the vehicle battery's negative (-)  
terminal.  
• Consult with your nearest dealer if  
installation requires the drilling of holes  
or other modifications of the vehicle.  
2. Disconnect the wire harness and the  
antenna.  
3. Press the release button on the front  
panel and remove the control panel  
(see the steps of removing the front  
panel).  
4. Lift the top of the outer trim ring then  
pull it out to remove it.  
5. The two supplied keys release tabs  
inside the unit's sleeve so you can  
remove it. Insert the keys as far as they  
will go (with the notches facing up) into  
the appropriate slots at the middle left  
and right sides of the unit. Then slide  
the sleeve off the back of the unit.  
• Install the unit where it does not get in  
the driver’s way and cannot injure the  
passenger if there is a sudden stop,  
like an emergency stop.  
• If installation angle exceeds 30˚ from  
horizontal, the unit might not give its  
optimum performance.  
30˚  
• Avoid installing the unit where it would  
be subject to high temperature, such  
as from direct sunlight, or from hot air,  
from the heater, or where it would be  
subject to dust, dirt or excessive  
vibration.  
Sleeve  
L Key  
Outer Trim Ring  
Front Panel  
DIN FRONT/REAR-MOUNT  
R Key  
This unit can be properly installed either  
from “Front” (conventional DIN Front-  
mount) or “Rear” (DIN Rear-mount  
installation, utilizing threaded screw holes  
at the sides of the unit chassis).  
For details, refer to the following  
illustrated installation methods.  
6
 
INSTALLATION  
6. Mount the sleeve by inserting the sleeve  
into the opening of the dashboard and  
bend open the tabs located around the  
sleeve with a screwdriver. Not all tabs  
will be able to make contact, so  
examine which ones will be most  
effective. Bending open the appropriate  
tabs behind the dashboard to secure  
the sleeve in place.  
Spring Washer  
Hex Nut  
Metal Strap  
Mounting Bolt  
Plain Washer  
Tapping Screw  
Dashboard  
Tabs  
10. Reconnect the cable to the vehicle  
battery's negative (-) terminal. Then  
replace the outer trim ring and install  
the unit's front panel. (see the steps  
of “installing the front panel”).  
Screwdriver  
Removing the unit  
1. Make sure the ignition is turned off,  
then disconnect the cable from the  
vehicle battery's negative (-) terminal.  
2. Remove the metal strap attached the  
back of the unit (if attached).  
3. Press the release button to remove the  
front panel.  
4. Lift the top of the outer trim ring then  
pull it out to remove it.  
5. Insert both of the supplied keys into  
the slots at the middle left and right  
sides of the unit, then pull the unit out  
of the dashboard.  
Sleeve  
7. Reconnect the wire harness and the  
antenna and be careful not to pinch  
any wires or cables.  
8. Slide the unit into the sleeve until it  
locks into place.  
9. To further secure the unit, use the  
supplied metal strap to secure the back  
of the unit in place. Use the supplied  
hardware (Hex Nut (M5mm) and Spring  
Washer) to attach one end of the strap  
to the mounting bolt on the back of  
the unit. If necessary, bend the metal  
strap to fit your vehicle's mounting  
area. Then use the supplied hardware  
(Tapping Screw (5x25mm) and Plain  
Washer) to attach the other end of  
metal strap to a solid metal part of the  
vehicle under the dashboard. This strap  
also helps ensure proper electrical  
grounding of the unit.  
Note to install the short threading  
terminal of the mounting bolt to the  
back of the unit and the other long  
threading terminal to the dashboard.  
7
 
INSTALLATION  
DIN REAR-MOUNT (Method B)  
If your vehicle is a Nissan, Toyota, follow  
these mounting instructions.  
Use the screw holes marked T (Toyota),  
N (Nissan) located on both sides of the  
unit to fasten the unit to the factory radio  
mounting brackets supplied with your  
vehicle.  
Side view showing  
Screw Holes marked  
T, N  
Factory Radio  
Mounting  
Bracket  
Screw  
Hook  
Screw  
Dashboard or  
Console  
To fasten the unit to the factory radio  
mounting brackets.  
1. Use a screwdriver to loose the hook's  
screws on the front left and right sides  
of the unit and remove the hooks.  
2. Align the screw holes on the bracket  
with the screw holes on the unit, and  
then tighten the screws (5x5mm) on  
each side.  
Note: the outer trim ring, sleeve and the  
metal strap are not used for method B  
installation.  
8
 
USING THE DETACHABLE FRONT PANEL  
REMOVING THE FRONT PANEL  
1. Press the release button on  
the front panel and pull off the front  
panel.  
Precautions when handing  
1. Do not drop the front panel.  
2. Do not put pressure on the display or  
control buttons when removing or  
installing the front panel.  
3. Do not touch the contacts on the front  
panel or on the main unit body. It may  
result in poor electrical contact.  
4. If any dirt or foreign substances  
adhered on the contacts, they can be  
removed with a clean and dry cloth.  
5. Do not expose the front panel to high  
temperatures or direct sunlight in  
anywhere.  
Release Button  
Front Panel  
6. Keep away any volatile agents (e.g.  
benzene, thinner, or insecticides) from  
touching the surface of the front panel.  
7. Do not attempt to disassemble the  
front panel.  
2. Keep front panel into the case.  
Protective Case  
Front Panel  
INSTALLING THE FRONT PANEL  
To install the front panel, insert the panel  
into the housing and make sure the panel  
is properly installed. Otherwise,  
abnormality occurs on the display or some  
keys will not function properly.  
9
 
WIRING CONNECTION  
XM AUDIO CABLE(BLACK)  
AUDIO R IN (RED)  
AUDIO L IN (WHITE)  
AUDIO R IN (RED)  
AUDIO L IN (WHITE)  
VIDEO IN (YELLOW)  
XM RECEIVER  
CONNECTOR (BLACK)  
AV IN CABLE (BLACK)  
AV OUT CABLE (GRAY)  
VIDEO OUT 1 (YELLOW)  
VIDEO OUT 2 (YELLOW)  
DIGITAL AUDIO (ORANGE)  
ANTENNA  
CONNECTOR  
DC OUT (BLACK)  
FUSE  
GREEN BLACK YELLOW  
RED  
FRONT RCA CABLE(BROWN)  
Rch  
WHITE  
Lch  
RED  
REAR RCA CABLE(GREY)  
Rch  
WHITE  
Lch  
SUBWOOFER CABLE (GREEN)  
PINK  
BLUE  
RED  
TELEPHONE  
MUTE  
POWER ANTENNA  
IGNITION  
SWITCH (ACC+)  
MEMORY  
BACK-UP(B+)  
YELLOW  
CHOKE  
BOX  
BLACK  
GROUND (B-)  
GREY  
WHITE  
FRONT Lch  
SPEAKER  
FRONT Rch  
SPEAKER  
WHITE/BLACK  
GREEN  
GREY/BLACK  
VIOLET  
REAR Lch  
SPEAKER  
REAR Rch  
SPEAKER  
GREEN/BLACK  
VIOLET/BLACK  
NOTE:  
MUTE WHILE TELEPHONING  
If your unit is connected to a mobile telephone through the telephone mute  
line, the car radio’s volume will be muted as soon as you “pick up” the  
telephone. “TEL MUTE” flashes in the display.  
10  
 
LOCATION AND FUNCTION OF KEYS  
THE PLAYER  
12 7 11 10 24 15  
8
5
6
13  
4 17  
3
9
2
20 21 22 14 18  
23  
19  
1
16  
1. PWR (power button)  
2. DISP  
3. EQ  
14. 1~6 preset buttons  
15. SMART-M  
16. MANU/SKIP  
17. MANU/SKIP  
18. AMS  
19. ST/ XM-MOD  
20.  
4.  
5. Disc Slot  
6. MOD(SW)  
7.  
8. Liquid Crystal Display  
9. ENT/MUT  
10. SEL  
11. VOLUME  
12. VOLUME  
13. BND/MEN  
21. SCN  
22. RPT  
23. SHF  
24. RX  
When remove the front panel:  
26 25  
25. LED  
26. RESET button  
11  
 
LOCATION AND FUNCTION OF KEYS  
REMOTE CONTROL  
27  
5
24  
1
3
32  
8
2
6
4
7
25  
9
28  
10  
31  
30  
26  
29  
15  
12  
11  
13  
23  
18  
19  
17  
16  
14  
20  
22  
21  
12  
 
LOCATION AND FUNCTION OF KEYS  
1.  
POWER  
Press POWER to turn the unit ON or OFF.  
2. SMART  
3. A-B  
4. ANGLE  
5.  
In DVD mode, press it shortly to enter SMART MODE function.  
A-B repeat allows a passage to be repeated continuously.  
Changing of the view angle on multi-angle DVD disc.  
Press to play/pause the disc.  
6. MODE (SW) Changing between radio mode, disc (DVD/VCD/CD/MP3) play  
mode, and AV IN mode.  
Press it for several seconds to toggle sub-woofer output. Press it  
for several seconds again to release this mode.  
7. ZOOM  
Allows the picture to be increased in size.  
Press to mute the sound.  
8. MUTE  
9. SUBTITLE  
Changing of the SUBTITLE language on multi-subtitle language  
DVD disc.  
10. SETUP  
11. SEL  
Display the SETUP menu.  
Press to select the desired adjustment mode. Then press VOL+/-  
to change settings.  
12.  
13. OK  
14.  
/
,
/
In case of menu mode,  
/
,
/
buttons served as cursor buttons  
to select item left/right, ahead/back.  
Confirm the Track/Chapter selected with the numeric buttons or  
selected with the cursor buttons on screen display.  
Changing for slow playback motion (For VCD/DVD).  
/
15. ST/XM-MOD Display the TITLE menu that is stored in DVD disc.  
(TITLE)  
In radio mode, press it shortly to select mono or stereo mode. Press  
and hold it for a long time to select between local and distant  
stations.  
16.  
17.  
/
/
Press  
to search forward rapidly &  
for fast tuning.  
press to skip back one track.  
to  
to search reverse rapidly.  
In radio mode, press  
/
Press  
to skip to the next track &  
In radio mode, press  
to increase frequency or press  
decrease frequency by one step of channel spacing.  
When the clock flashing, use  
/
to adjust the minutes or hours.  
18. AUDIO  
19. EQ  
Press and hold the button for several seconds to change the AUDIO  
soundtrack on multi-audio soundtrack DVD disc. Press the button  
shortly to change the sound mode of the VCD discs.  
Press it to select the equalization mode, such as FLAT, CLAS, POP,  
ROCK.  
20. 0-9  
21. PBC  
22. GOTO  
Numeric buttons  
Changing between PBC ON and PBC OFF on the VCD disc.  
Disc search button, cooperatively used with numeric buttons.  
23. VOLUME+/- Press VOLUME+/- button to increase or decrease the volume level.  
24. DISPLAY  
Display statistical disc information during playback.  
Hold down the button until the clock flashes, then use  
adjust the minutes or hours.  
/
to  
25. REPEAT  
26. P/N  
27. PROGRAM  
28. SHUFFLE  
29. RESUME  
Switch the Repeat mode of discs.  
Switch between PAL mode and NTSC mode.  
Allows the track played in the order you programmed (For MP3/CD).  
Allows the track played in random order (NOT for DVD).  
When in stop mode, press the button, the play can be resumed  
from the stop point.  
30. AMS (STOP) In radio mode, press for several seconds to enter into automatic  
memory storing function; press shortly to scan preset station. Press  
it to stop disc playback.  
31. BND (MENU) In DVD mode, display the root menu that is stored on the DVD disc  
or return to disc menu on the VCD discs.  
Changing between PBC ON and PBC OFF on the VCD disc.  
In radio mode, press it to select desired band.  
Press to eject the disc.  
32. EJECT  
13  
 
REMOTE CONTROL  
Preparing the Remote Control  
Inserting the Batteries  
1. Open the battery compartment cover.  
2. Insert the new battery. Make sure  
that the positive and negative  
terminals of the battery are oriented  
as indicated.  
3. Close the cover.  
Battery: a button cell lithium battery  
(CR2025 3V)  
Using the Remote Control  
Point the remote control towards the  
player front face remote sensor RX  
(remote control signal receiver).  
Operation angle: About 30 degree in  
each the direction of the front of the  
remote sensor.  
LOADING/EJECTING A DISC  
Loading a Disc  
When all connections have completed,  
you can load a disc as follow:  
1. Turn the ignition on to the accessory  
position.  
2. Press the PWR button (1) on the front  
panel or POWER button on the remote  
control to turn on the unit.  
3. Insert the disc with printed side facing  
up into the disc slot (2).  
4. The player starts playback  
automatically.  
2
3
1
Ejecting a Disc  
Press (EJ) button (3) on the front panel  
or (EJECT) button on remote control  
to eject the disc.  
14  
 
OPERATION  
mute down the sound instantly. Press it  
again to resume sound output.  
BASIC OPERATION  
SWITCHING ON/OFF THE UNIT  
Press any button on the front panel (except  
button and button) or POWER button  
on the remote control to turn on the unit.  
When the unit is on, press PWR button  
on the front panel or POWER button on  
the remote control to turn off the unit.  
EQUALIZATION  
Press EQ button on the front panel or on  
the remote control shortly to turn on  
equalization function and to select desired  
audio mode. There are five kinds of mode  
as below:  
FLAT  
CLAS  
POP  
ROCK  
DSP OFF  
FACEPLATE RELEASE  
Press  
button on the front panel to  
detach the removable faceplate.  
MODE SELECTION  
Press MOD button on the front panel or  
MODE button on the remote control to  
select among radio, disc  
(DVD/VCD/CD/MP3) play mode, and AV  
IN mode.  
SOUND ADJUSTMENT  
Press SEL button on the front panel of  
the unit or on the remote control to  
select the desired adjustment mode.  
The adjustment mode will change in the  
following order:  
LIQUID CRYSTAL DISPLAY  
Exhibit current frequency and activated  
functions on the display of the front  
panel.  
VOL  
BASS  
TRE  
MID  
BAL  
(Balance)  
FAD  
(Fader)  
(Volume) (Bass) (Treble) (Middle)  
By pressing the VOLUME /VOLUME  
buttons on the front panel or VOLUME  
+/- buttons on the remote control, it is  
possible to adjust the desired sound  
quality.  
FLASHING LED  
If the front panel does not install in the  
main unit, the LED will be flashing.  
REMOTE SENSOR  
SUBWOOFER  
Point the remote control handset to the  
remote sensor RX. Press the function  
keys on the handset to control the  
system.  
Press and hold MOD (SW) button on the  
front panel or MODE (SW) button on the  
remote control for several seconds to  
toggle sub-woofer output. Press it for  
several seconds again to release this  
mode.  
RESET FUNCTION  
RESET button on the housing must be  
activated with either a ballpoint pen or  
thin metal object. The RESET button is  
to be activated for the following reasons:  
- Initial installation of the unit when all  
wiring is completed.  
- All the function buttons do not operate.  
- Error symbol on the display.  
Note: if press RESET button, the unit  
can’t work yet, please use a cotton swab  
soaked in isopropyl alcohol to clean the  
socket on the front panel.  
SET THE CLOCK  
Press the DISP button on the front panel  
or DISPLAY button on the remote control,  
the clock is shown on the LCD display.  
Then hold down the DISP button or  
DISPLAY button until the clock flashes.  
Then press CH/TUN/TRK  
the front panel or button on the remote  
control to change minutes; press  
CH/TUN/TRK on the front panel or  
button on the remote control to change  
button on  
hours.  
MUTE  
Press and hold ENT/MUT button on the  
front panel for several secounds or press  
MUTE button on the remote control to  
15  
 
OPERATION  
RADIO OPERATION  
strongest stations are stored into the  
corresponding preset number button.  
- Program scanning  
Press AMS button shortly to scan preset  
station.  
SWITCHING TO RADIO MODE  
Press MOD on the front panel or MODE  
on the remote control to select radio  
mode, the radio mode appears in the  
display together with the memory band  
and frequency.  
STATION STORING  
Press any one of the preset buttons (1 to  
6) on the front panel to select a station,  
which had been stored in the memory.  
Press this button for several seconds,  
current station is stored into the number  
button.  
SELECTING THE FREQUENCY BAND  
During radio mode, shortly press  
BND/MEN button on the front panel or  
BAND (MENU) button on the remote  
control to select the desired band. The  
reception band will change in the following  
order:  
MONO/STEREO  
Press ST/XM-MOD button on the front  
panal or remote control shortly to select  
mono or stereo mode. You can sometimes  
improve reception of distant stations by  
selecting mono operation.  
FM1  
FM2  
FM3  
AM1  
AM2  
SELECTING STATION  
During radio mode, shortly press  
CH/TUN/TRK button on the front  
button on remote control to  
SCAN  
panel or  
Press ENT/MUT button on the front panel  
shortly to set the function to scan mode,  
which scanning to higher frequency station  
with receivable signal and keep on each  
station for several seconds.  
increase frequency by one step of channel  
spacing, and shortly press CH/TUN/TRK  
on the front panel or  
remote control to decrease frequency by  
one step of channel spacing. Hold  
button on  
CH/TUN/TRK  
front panel longer or press  
/
buttons on the  
buttons  
XM OPERATION  
/
on the remote control for fast tuning. The  
frequency is updated correspondingly on  
display.  
SWITCHING TO XM MODE  
Shortly press MOD button to select XM  
mode.  
LOCAL/DISTANT  
SELECTING USER-PRESET CHANNEL  
In XM mode, the XM user-preset channel  
group (3 channels) is toggled cyclically  
through the group by quickly pressing the  
BND/MEN button.  
Press ST/XM-MOD button on the front  
panal or remote control for several  
seconds to select between local and  
distant stations.  
Local setting for reception of strong  
station, and a distant setting for reception  
of weaker stations. This function is effect  
during AUTO SEEK operation.  
The channel will change in the following  
order:  
XM1  
XM2  
XM3  
AUTOMATIC MEMORY STORING &  
PROGRAM SCANNING  
- Automatic memory storing  
SELECTING CHANNEL UP/DOWN  
Press the CH/TUN/TRK button or  
button to select the  
CH/TUN/TRK  
Press and hold AMS button on the  
front panel or on the remote control for  
several seconds, the radio searches  
from the FM1 the initial frequency and  
checks the signal strength until one  
cycle search is finished. And then 6  
channel up or down.  
SEARCHING SCHANNEL  
When the AMS button is shortly pressed,  
the unit searches for each user preset  
channel from XM1, XM2 to XM3. When  
an available channel is detected, the  
16  
 
OPERATION  
channel will be held at that preset number  
and played about 5 seconds. After that,  
it will search for another available channel.  
2.Use CH/TUN/TRK  
CH/TUN/TRK  
button or  
button to select  
hundred digit.  
3.Press ST/XM-MOD button again to  
confirm entry of the hundred digit and  
the 10s digit is flashing on/off.  
4.Use CH/TUN/TRK  
CH/TUN/TRK  
digit.  
5.Press ST/XM-MOD button again to  
confirm entry of the 10s digit and the  
10s digit is flashing on/off.  
STORING PRESET CHANNELS  
The preset buttons can be used to store  
6 channels for convenient access to your  
favorite channels.  
- Programming channels  
1.Select the desired channel you want to  
store in memory.  
2. Press and hold one of the preset buttons  
for more than 2 seconds until the  
corresponding preset button number  
appears. Repeat steps 1 and 2 to  
program additional channels.  
- Quick tuning  
button or  
button to select 10s  
6.Press ST/XM-MOD button again to  
confirm entry of the 1s digit.  
7.Press BND/MEN button to direct tune.  
Press one of the six preset buttons  
shortly to select a preset channel directly.  
DISC (DVD/VCD/CD/MP3) OPERATION  
STOPPING PLAY  
XM MODE SELECTION  
- Briefly press the button on the front  
panel or AMS (STOP) button on the  
remote control to stop the unit  
Press ST/XM-MOD button to switch  
CATEGORY mode, DIRECT TUNE mode,  
or NORMAL mode. It is used as the  
selection of each:  
playback, when the  
button is  
pressed, normal playback will  
continue.  
Normal  
Category mode  
Direct Tune  
When Category mode is engaged, the  
CATEGORY” function is turned on in the  
display. When Category mode is released,  
the “CATEGORY” function is turned off.  
When Direct mode is engaged, DIRECT”  
of alphanumeric display is turned on.  
Select category and tune UP/DOWN  
within selected category  
Use D.UP/CAT button or D.DN/CAT  
button to select desire Category and press  
BND/MEN button. In Category mode,  
channels can be tuned within the same  
category.  
- Press button or AMS (STOP) button  
twice to stop the playback and go  
back to initial Track/Chapter.  
RAPID FORWARD/RAPID REVERSE  
Press  
&
during play. Each time the  
button is pressed, the speed of rapid  
forward/reverse changes according to  
the disc as follow:  
FOR DVD/MP3:  
Normal Playback  
2X  
4X  
6X  
8X  
FOR VCD/CD:  
Normal Playback  
1X  
2X  
3X  
4X  
- When the user wishes to search by  
Category, press ST/XM-MOD button  
until it goes into Category search mode.  
- Press M6 button or M5 button up and  
down to get to the desired category.  
- To change channels, press ST/XM-MOD  
button again to Normal mode, and then  
SKIPPING TRACK  
Press CH/TUN/TRK  
on the front panel or  
/
buttons  
buttons on  
/
the remote control during playback.  
Press  
and  
or  
or  
to skip to next track,  
to back one track.  
press CH/TUN/TRK  
button or  
CH/TUN/TRK button to select the  
channel up or down.  
How to direct tune  
1.In direct mode, display shows DIRECT  
and 000” channel number. (Hundred  
Digit flashing on/off)  
Note: For some VCD 2.0 dics  
(PBC-playback control),  
buttons may be unavailable.  
/
or  
/
SLOW MOTION PLAY  
Press button on the remote control  
/
17  
 
OPERATION  
during play.  
REPEATING PLAYING A PASSAGE  
A-B repeat allows a passage to be  
repeated continuously. Press A-B button  
on the remote control at the start of the  
required passage, then press A-B button  
again at the end of the passage. To revert  
to normal playing, press A-B button  
again. Each time the button is pressed,  
the screen will display as follows:  
Each timEach time the button is pressed,  
the speed of slow changes according to  
the according to the disc as follow.  
FOR DVD:  
Normal Playback  
2X  
4X  
8X  
FOR VCD:  
Normal Playback  
1X  
2X  
3X  
A TO B SET A  
A TO B SET B  
A TO B CANCELLED  
PAUSE PLAYING  
Pressing on the remote control or on  
the front panel during playback will stop  
play temporary. To return to normal  
TIME SEARCH (GOTO)  
FOR DVD  
Press GOTO button on the remote  
control twice, the screen will display the  
following message:  
playback, press  
once again.  
TITLE 01/01 TIME -- : -- : --  
00:00:25  
REPEATING PLAYING  
FOR DVD:  
Press RPT button on the front panel or  
REPEAT button on the remote control to  
select repeat mode as follow:  
You can select the item you want to  
watch through TIME setting by using  
numeric buttons and ENT/MUT button  
on the front panel or OK button on the  
remote control.  
FOR CD/VCD (WITH PBC OFF):  
Press GOTO button once, the screen will  
display the following message:  
CHAPTER REPEAT ON  
TITLE REPEAT ON  
REPEAT OFF  
FOR VCD/CD:  
In stop mode, press RPT button or  
REPEAT button to select repeat mode  
as follow:  
GOTO -- : --  
00:00:25  
REP-ONE  
REP-ALL  
REPEAT OFF  
1. Continuously repeat at the current  
chapter/track, when selected REP-  
ONE mode.  
2. Select REP-ALL mode to continuously  
repeat all chapter/track on the current  
disc.  
3. When the player finishes playback of  
the current disc last chapter/track, it  
will stop and display the elapsed time.  
When REPEAT OFF mode is selected,  
REP-ONE & REP-ALL disappears  
from screen display.  
Use numeric buttons to input the time  
directly.  
ZOOM FUNCTION  
Allows the picture to be increased in size.  
Press ZOOM button on the remote  
control to toggle among 1.5 scale, 2.0  
scale and 3.0 scale.  
When the scale is 3 times, press ZOOM  
button again to cancel the zoom function.  
1.5X  
2.0X  
3.0X  
Cancelled  
During Zoom mode, press  
/
,
/
4. REPEAT feature does not support  
VCD2.0 (with PBC ON).  
buttons to move pictures up, down, left  
or right direction.  
PBC FUNCTION  
PLAYING IN RANDOM ORDER (ONLY  
FOR VCD/CD/MP3)  
Press SHF button on the front panel or  
SHUFFLE button on the remote control,  
track selection will be made in random  
order. The display screen will show  
While the VCD disc is playing, press  
BND/MEN button on the DVD unit or  
PBC button on the remote control to  
change between PBC ON and PBC OFF  
on the VCD disc.  
18  
 
OPERATION  
SHUFFLE ON” on the screen. Then  
press button to start SHUFFLE  
playback. Press SHF button or  
SHUFFLE button again in stop mode,  
SHUFFLE OFF” appears and release  
the mode.  
ON-SCREEN DISPLAY FUNCTION  
Pressing the DISPLAY button during  
playback to display the contents of the  
current disc on the screen.  
Example, how to display the contents of  
the curreny disc.  
PREVIEWING PLAYING (ONLY FOR  
VCD/CD/MP3)  
FOR DVD:  
Press SCN button on the front panel to  
play first several seconds of each track  
on the current disc. Press again to stop  
intro and listen to track.  
(1) Press DISPLAY for the first time:  
TITLE 01/03 CHAPTER 002/025  
00:02:25  
PLAYING IN PROGRAMMED ORDER  
For CD/VCD (WITH PBC OFF):  
Press the stop button twice to ensure  
that the player is in STOP mode. Then  
press PROGRAM button, the screen will  
display “PROGRAM P00:00. For  
example: press numeric button 4,  
PROGRAM P01:04” appears, it means  
track 4 will be played first, then press  
numeric button 6 and “PROGRAM  
P02:06” appears. Press the different  
numeric button to select the  
corresponding track, and then press OK  
button to confirm. If there isn’t any  
operation, it will confirm the inputs  
automatically after five seconds. Then  
press button or OK button to exit  
program mode and play tracks in  
programmed order.  
Title Number, Total Title Number, Chapter  
Number, Total Chapter Number of this  
Title of the disc currently being played  
will be shown on the screen, along with  
the elapsed time.  
(2) Press DISPLAY for the second time:  
TITLE REMAIN  
01:46:58  
(3) Press DISPLAY for the third time:  
CHAPTER ELAPSED  
00:00:24  
When playing in programmed order,  
press stop button twice, then press  
PROGRAM button, and then press OK  
button, it will play in normal order.  
For MP3:  
In stop mode, press PROGRAM button,  
the screen will display “PROGRAM  
P00:0000” and the program method is  
the same as described above. If you  
want to complete program setting, press  
(Stop) button first then press button  
to play tracks in programmed order. In  
stop mode press PROGRAM button to  
exit program mode and “PROGRAM  
OFF” appears. If you set WITH MENU in  
SMART NAV item in PREFERENCES  
(4) Press DISPLAY for the fourth time:  
CHAPTER REMAIN  
00:01:39  
(5) Press DISPLAY for the fifth time:  
The message on the screen will be cleared.  
FOR VCD:  
(1) Press DISPLAY for the first time:  
SINGLE ELAPSED  
PAGE, you can use  
/
,
/
buttons to  
00:25  
01/13  
select PROGRAM PXXX mode or track  
number and press OK button to confirm  
it.  
19  
 
OPERATION  
(2) Press DISPLAY for the second time:  
(4) Press DISPLAY for the fourth time:  
TOTAL REMAIN  
00:40:35  
SINGLE REMAIN  
00:03:15 01/13  
TRACK: 01/14  
(3) Press DISPLAY for the third time:  
(5) Press DISPLAY for the fifth time:  
The message on the screen will be cleared.  
TOTAL ELAPSED  
00;00:25 01/13  
FOR MP3:  
(1) Press DISPLAY for the first time:  
CHAPTERELASPED 00:00:25  
(4) Press DISPLAY for the fourth time:  
TOTAL REMAIN  
00:40:35 01/13  
(5) Press DISPLAY for the fifth time:  
The message on the screen will be cleared.  
(2) Press DISPLAY for the second time:.  
CHAPTERREMAIN 00:04:25  
FOR CD:  
(1) Press DISPLAY for the first time:  
SINGLE ELASPED  
00:00:25  
(3) Press DISPLAY for the third time:  
The message on the screen will be cleared.  
TRACK: 01/14  
MULTI-AUDIO LANGUAGE FUNCTION  
(2) Press DISPLAY for the second time:  
For DVD:  
SINGLE REMAIN  
00:03:15  
Press AUDIO button on the remote  
control for several seconds during  
playback. Each time the button is  
pressed, the audio soundtrack language  
changes on sequential order.  
Notes:  
TRACK: 01/14  
- The language number is different  
according to the disc.  
- Some disc only contain one language  
soundtrack.  
(3) Press DISPLAY for the third time:  
TOTAL ELASPED  
00:00:25  
- When no different language  
soundtrack are recorded,  
displayed at screen left top corner.  
will be  
TRACK: 01/14  
For VCD:  
Press AUDIO button on the remote  
control for several seconds during  
playback. It is possible to switch the  
sound between mono and stereo sound.  
20  
 
OPERATION  
MONO LEFT MONO RIGHT STEREO  
SMART MODE FUNCTION  
In DVD mode, press SMART-M button  
on the DVD unit or SMART button on the  
remote control shortly during disc  
playback to activate SMART MODE  
function and “SMART MODE” appears  
on the display of the DVD unit. When  
press MOD or MODE button to switch  
to radio or AV IN mode, the front  
speakers will output the corresponding  
radio audio signal or audio signal of the  
AV source, and the rear speakers will be  
muted. In any mode (radio or AV IN), the  
DVD disc is playing and the video out 1  
and 2 jacks output the video signal of  
DVD all the while.  
When you press SMART-M button or  
SMART button shortly during disc  
playback to activate SMART MODE  
function. In any mode, press and hold  
SMART-M button or SMART button for  
several seconds, SMART MODE” will  
be flashing. When you press MOD or  
MODE button to switch to radio or AV IN  
mode, the front speakers will output the  
corresponding radio audio signal or  
audio signal of the AV source, and the  
rear speakers will be muted.  
But when switch to AV IN mode, the  
video out 1 and 2 jacks will not output  
the video signal of DVD source any more.  
In AV IN mode, these two jacks output  
the video signal of AV IN source, there  
isn’t any video signal to output from the  
two video output jacks.  
MENU FUNCTION  
Press BND/MEN button on the DVD  
unit or BND (MENU) button on the  
remote control while the disc is playing  
and the disc menu will be displayed. You  
can navigate with the remote control  
navigation keys and select a feature wih  
the ENT/MUT button on the DVD unit  
or OK button on the remote control.  
TITLE MENU FUNCTION (FOR DVD ONLY)  
If the DVD has multiple titles recorded on  
the disc. It can select preferred title from  
the title menu to start playback.  
1. Press ST/XM-MOD button on the front  
panel of the DVD unit or ST/XM-MOD  
button on the remote control during  
playback.  
- The title menu is display.  
2. Select preferred title by the cursor  
buttons and confirm by ENT/MUT  
button on the DVD unit or OK button  
on the remote control.  
MULTI-SUBTITLE LANGUAGES  
FUNCTION (FOR DVD ONLY)  
Press SUBTITLE during playback.  
Each time the button is pressed, the subtitle  
language changes in sequential order.  
Notes:  
-
-
-
The language number is different  
according to the disc.  
Some discs only contain one subtitle  
language.  
When no different subtitle language  
When SMART MODE is activated, press  
MOD or MODE button to switch to DVD  
mode, press SMART-M button or  
SMART button to release this function.  
are recorded,  
will be displayed at  
screen left top corner.  
MULTI-ANGLE FUNCTION (FOR  
DVD ONLY)  
Press ANGLE during playback.  
Each time the button is pressed, the angle  
changes in sequential order.  
Notes:  
SMART NAVIGATION IN MP3 DISC  
PLAY  
MP3 disc is playing as the format of  
FOLDER.  
-
The angle number is different  
according to the disc.  
The function only works for discs  
having scenes recorded at different  
angles.  
When no different angle are recorded,  
will be displayed at screen left top  
corner.  
-
-
21  
 
OPERATION  
For example:  
AV IN OPERATION  
When you connect another audio/video  
system to the unit through the AV IN  
terminals on the back of the unit, press  
MOD button on the front panel or MODE  
on the remote control to select AV IN  
mode.  
SMART NAVI  
ROOT  
CD01  
MP3 001 PLUMT  
MP3 002 RZID  
MP3 003 ASCIS  
MP3 004 DCYI  
MP3 005 BFZ  
CD02  
CD03  
CD04  
CD05  
DISC  
In stop mode, use  
/
,
/
on the  
remote control to select the item or folder  
(such as CD01, CD02...), and press  
ENT/MUT button on DVD unit or OK  
button on the remote control to confirm,  
then select the desired track (such as  
001 PLUMT, 002 RZID...) on the current  
folder to play.  
Pressing RPT button on the front panel  
or REPEAT button on the remote control  
repeatedly can select two kinds of repeat  
play mode.  
REP-ONE: Play the same song over and  
again.  
FOLDER REP: Play all songs in the  
current directory in sequence, over and  
again.  
FOLDER: Play all songs in the current  
directory once.  
When PLAY MODE is selected, press /  
to change between the following  
mode:  
SINGLE REP-ONE FOLDER FOLDER REP  
DISC SCAN DISC  
DISC REP  
SHUFFLE ON PROGRAM PXXX  
Pressing SHF on the front panel or  
SHUFFLE button on the remote control  
to play tracks in random order. Press  
SHF button or SHUFFLE button again to  
release the mode.  
During playback, use or to skip an  
item ahead or back.  
: Rapid reverse,  
: Rapid advance  
Note: The FOLDER cannot be selected  
during playing. It can be selected after  
(Stop) button pressed.  
22  
 
SETUP  
INITIAL SETUP  
GENERAL SETUP  
SETUP MENU --- MAIN PAGE  
--- GENERAL PAGE ---  
TV DISPLAY  
PIC MODE  
NORMAL / PS  
NORMAL / LB  
WIDE  
GENERAL SETUP  
SPEAKER SETUP  
AUDIO SETUP  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
PREFERENCES  
EXIT SETUP  
1.Press SETUP on the remote control  
or on the DVD unit in the stop  
mode.(Press the stop button twice to  
ensure that the player is in STOP  
mode.)  
MAIN PAGE  
TV Screen  
4:3  
Wide (16:9)  
Video Material  
Normal  
Pan Scan  
Letter-box  
4:3  
2.The initial SETUP menu is displayed.  
3.Select the preferred item by using the  
16:9  
/
buttons.  
4.Press ENT/MUT on the front panel or  
OK button on the remote control.  
TV display setup  
This is to select the appropriate TV  
aspect ratio (4:3 or 16:9) according to  
the connected TV set.  
a. GENERAL SETUP  
This setup page includes all the  
item of TV display & Audio output  
feature. For details please refer to  
GENERAL SETUP MENU.  
Normal/PS (For 4:3 TV)  
Played back in the PAN & SCAN style.  
(If connected to wide-screen TV, the left  
and right edges are cut off.)  
b. SPEAKER SETUP  
This is to activate the audio output  
from DOLBY AC3 5.1 DOWNMIX  
to 2 channel mode. Please refer to  
SPEAKER SETUP MENU.  
Normal/LB (For 4:3 TV)  
Played back in letterbox style.  
(If connected to wide-screen TV, black  
bands appear at top and bottom of the  
screen.)  
c. AUDIO SETUP  
This setup page includes all the  
items for AUDIO. Please refer to  
AUDIO SETUP MENU.  
Wide (For 16:9 TV)  
Select when a wide-screen TV set is  
connected.  
d. PREFERENCES SETUP  
This setup page includes all the  
configuration of support feature.  
For details please refer to  
PREFERENCES SETUP MENU.  
23  
 
SETUP  
--- GENERAL PAGE ---  
--- GENERAL PAGE ---  
TV DISPLAY  
TV DISPLAY  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
AUTO  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
HI-RES  
N-FLICKER  
ENGLISH  
FRENCH  
GERMAN  
ITALIAN  
PORTUGUESE  
SPANISH  
MAIN PAGE  
MAIN PAGE  
PIC mode setup  
OSD LANG type setup  
Select the preferred OSD (On Screen  
Display) language by using the  
buttons.  
Select AUTO, the player PIC mode will  
depend on DVD disc.  
/
Select HI-RES format for best image  
resolution.  
Select N-FLICKER format on image or  
picture with noise or distortion.  
--- GENERAL PAGE ---  
--- GENERAL PAGE ---  
TV DISPLAY  
PIC MODE  
TV DISPLAY  
PIC MODE  
ANGLE MARK  
OSD LANG  
ANGLE MARK  
OSD LANG  
CAPTIONS  
ON  
OFF  
CAPTIONS  
ON  
SCR SAVER  
OFF  
SCR SAVER  
MAIN PAGE  
MAIN PAGE  
CAPTIONS setup  
When play DVD disc, activte the  
ANGLE MARK display setup  
If it is set to ON, when the multi-angle  
CAPTIONS feature by selecting ON and  
the captions (such as the actor dialogue)  
appear on the screen; deactivate this  
feature by selecting OFF and the  
captions will not appear.  
DVD disc is playing,  
(the angle mark)  
will appear on the screen; if it is set to  
OFF, the mark will not appear.  
24  
 
SETUP  
--- GENERAL PAGE ---  
AUDIO SETUP  
--- AUDIO SETUP ---  
TV DISPLAY  
PIC MODE  
ANGLE MARK  
OSD LANG  
CAPTIONS  
SCR SAVER  
SPDIF  
OFF  
ON  
OP MODE  
LPCM OUTPUT  
DYNAMIC  
ON  
OFF  
MAIN PAGE  
MAIN PAGE  
SPDIF  
This is to activate the digital audio output  
on or off.  
SCR SAVER setup  
Select the SCR SAVER ON/OFF.  
SPEAKER SETUP  
--- SPEAKER SETUP PAGE ---  
--- AUDIO SETUP ---  
SPDIF  
DOWNMIX  
LT/RT  
STEREO  
OP MODE  
LINE OUT  
MAIN PAGE  
LPCM OUTPUT  
DYNAMIC  
RF REMOD  
MAIN PAGE  
OP MODE  
- LINE OUT: Line out mode, with digital  
dialog normalization.  
- RF REMOD: RF remodulation mode,  
with heavy compression and digital  
dialog normalization.  
It is recommended to select LINE OUT  
mode.  
This is to activate the audio output from  
DOLBY AC3 5.1 DOWNMIX to 2 channel  
mode. Select the preferred SPEAKER  
connection by using the cursor buttons.  
- Select the LT/RT to activate the Dolby  
surround compatible output.  
- Select the STEREO to activate simple  
stereo mode.  
25  
 
SETUP  
--- AUDIO SETUP ---  
PREFERENCES SETUP  
SPDIF  
--- PREFERENCES PAGE ---  
OP MODE  
TV TYPE  
AUTO  
NTSC  
PAL  
AUDIO  
LPCM OUTPUT  
DYNAMIC  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
LPCM 48K  
LPCM 96K  
MAIN PAGE  
MAIN PAGE  
LPCM OUTPUT  
Selecting LPCM (Line Pause Code  
Modulation) OUTPUT between LPCM  
48K and LPCM 96K.  
The higher the sampling frequency is, the  
better the output audio quality is. It is  
recommended to select LPCM 96K.  
TV type setup  
This player can play discs recorded in  
either PAL or NTSC format.  
Select NTSC format, when you  
connected to NTSC TV.  
Select PAL format, when you connected  
to PAL TV.  
Select AUTO format, the player TV output  
format will be according to the DVD disc  
format.  
--- AUDIO SETUP ---  
SPDIF  
FULL  
6/8  
OP MODE  
--- PREFERENCES PAGE ---  
TV TYPE  
LPCM OUTPUT  
DYNAMIC  
4/8  
AUDIO  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
2/8  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
OFF  
MAIN PAGE  
DYNAMIC RANGE CONTROL  
Select DYNAMIC and adjust the dynamic  
range of a Dobly Digital encoded  
program. There are 8 steps between full  
compression and off compression.  
PORTUGUESE  
MAIN PAGE  
AUDIO language setup  
Select the preferred AUDIO soundtrack  
by using the cursor buttons.  
26  
 
SETUP  
--- PREFERENCES PAGE ---  
--- PREFERENCES PAGE ---  
TV TYPE  
TV TYPE  
1 G  
AUDIO  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
AUDIO  
2
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
3 PG  
4 PG 13  
5
6 PG-R  
7 NC-17  
8 ADULT  
NO PARENTAL  
PORTUGUESE  
OFF  
MAIN PAGE  
MAIN PAGE  
SUBTITLE language setup  
Select the preferred SUBTITLE language  
by using the cursor buttons.  
PARENTAL  
Select suitable parental guidance by the  
cursor buttons and confirmed by  
pressing ENT button on the DVD unit or  
OK button on the remote control.  
--- PREFERENCES PAGE ---  
--- PREFERENCES PAGE ---  
TV TYPE  
AUDIO  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
ENGLISH  
FRENCH  
SPANISH  
CHINESE  
JAPANESE  
GERMAN  
ITALIAN  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
CHANGE  
MAIN PAGE  
MAIN PAGE  
PORTUGUESE  
PASSWORD  
DISC MENU language setup  
Select CHANGE and press ENT or OK  
button. Type the old password (The initial  
factory code is 3308) and key in 4  
characters password now you want to  
use, and retype again to confirm key in  
correctly.  
Select the preferred DISC MENU  
language by using the cursor buttons.  
27  
 
SETUP  
--- PREFERENCES PAGE ---  
--- PREFERENCES PAGE ---  
TV TYPE  
TV TYPE  
AUDIO  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
RESET  
DEFAULTS  
SMART NAV  
LOGO  
ORIG LOGO  
CUST LOGO  
MAIN PAGE  
MAIN PAGE  
DEFAULTS  
LOGO  
Select reset to revert to factory initial  
settings.  
Select ORIG LOGO (original picture when  
the unit turns on) or CUSTLOGO  
(customer-set picture when the unit turns  
on).  
--- PREFERENCES PAGE ---  
Note: The CUST LOGO must be in the  
JPEG format. Load the picture disc into  
the drive of the DVD unit, when you  
select the desired picture, press  
button then press TITLE button, the  
current picture will be stored in the unit  
and LOGO IS COPIED” will appear on  
the screen.  
TV TYPE  
AUDIO  
SUBTITLE  
DISC MENU  
PARENTAL  
PASSWORD  
DEFAULTS  
SMART NAV  
LOGO  
NO MENU  
WITH MENU  
MAIN PAGE  
SMART NAV  
If selected WITH MENU mode, when  
playing an MP3 disc, the smart  
navigation menu will appear on the  
screen, then the user can select a track  
to play according to the menu hint.  
If selected NO MENU mode, when  
playing an MP3 disc, there is no menu to  
display and it starts to play directly.  
The user can adjust this item according  
to one’s need.  
28  
 
SETUP  
DEFAULTS TABLE  
General Setup TV Display  
PIC Mode  
Normal/LB  
AUTO  
Angle Mark ON  
OSD Language English  
Captions ON  
SCR Saver ON  
Stereo  
Speaker Setup Downmix  
Audio Setup SPDIF  
OP Mode  
Dynamic  
OFF  
Line Out  
FULL  
LPCM Output LPCM 96K  
Preferences TV Type  
AUTO  
Audio  
English  
English  
Subtitle  
DISC Menu English  
Parental  
NO Parental  
3308  
Password  
Smart NAV With Menu  
Logo ORIG Logo  
29  
 
TROUBLE SHOOTING  
If it appears that your DVD unit is faulty,  
first consult this checklist. It may be that  
something simple has been overlooked.  
DISTORTED SOUND FROM HIFI  
AMPLIFIER  
• Check to make sure that no audio  
connections are made to the amplifier  
phono input.  
Under no circumstances should you  
try to repair the player yourself, as  
this will invalidate the warranty. Only  
qualified service personnel can  
remove the cover or service this  
player.  
THE PLAYER DOES NOT RESPOND  
TO THE REMOTE CONTROL  
• Aim the remote control directly at the  
sensor on the front of the player.  
• Avoid all obstacles which may interfere  
with the signal path.  
NO POWER  
If the power supply is connected to the  
car accessory circuits, but the engine  
is not moving, switch the ignition key  
to “ACC”.  
• Check if the fuse is blown. Then replace  
the new fuse.  
• Inspect or replace the remote control  
battery.  
DISTORTED OR B/W PICTURE  
• The disc format is not according to the  
TV-set used (PAL/NTSC).  
• Check if the on/off button on the front  
of the player is set to on.  
NO AUDIO AT DIGITAL OUTPUT  
• Check the digital connections  
• Check the Digital Audio menu to make  
sure that the digital output is correctly  
set.  
NO PICTURE  
• Check if the monitor or TV is switched  
on.  
• Check if select proper mode, such as  
Disc Play mode and AV mode.  
• Check the video connection.  
• Check if the audio format of the selected  
audio language matches your receiver’s  
capabilities.  
DISTORTED PICTURE  
BUTTONS DO NOT WORK  
• Press Reset button on the housing of  
the DVD unit.  
• Check the disc for fingerprints and clean  
with soft cloth, wiping from centre to  
edge.  
• Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
THE RADIO DOES NOT WORK  
• Check if the antenna cable is connected  
firmly.  
THE RADIO STATION AUTOMATIC  
SELECTION DOES NOT WORK  
• If the signals are too weak, select a  
station manually.  
COMPLETELY DISTORTED PICTURE  
• The disc format is not according to the  
TV-set used (PAL/NTSC).  
NO COLOR IN PICTURE  
• The disc format is not according to the  
TV-set used (PAL/NTSC).  
DISC DOES NOT PLAY  
• Ensure the disc label is upwards.  
• Clean the disc.  
• Check if the disc is defective by  
trying another disc.  
NO SOUND  
• Check audio connections.  
• If using a HIFI amplifier, try another  
sound source.  
30  
 
SPECIFICATIONS  
GENERAL  
Power Supply Requirements  
Chassis Dimensions  
Tone Controls  
: DC 12 Volts, Negative Ground  
: 178 (W) x 160 (D) x 50 (H)  
- Bass (at 100 Hz)  
- Treble (at 10 KHz)  
Maximum Output Power  
Current Drain  
:
:
10 dB  
10 dB  
: 4 x 40 watts  
: 15 Ampere (max.)  
DVD PLAYER  
Signal to Noise Ratio  
Channel Separation  
Frequency Response  
: More than 55 dB  
: More than 45 dB  
: 20 Hz - 20 kHz  
RADIO  
FM  
Frequency Coverage  
IF  
Sensitivity (S/N = 30 dB)  
Stereo Separation  
: 87.5 to 107.9 MHz  
: 10.7 MHz  
: 4 µV  
: > 25 dB  
AM  
Frequency Coverage  
IF  
Sensitivity (S/N = 20 dB)  
: 530 to 1710 KHz  
: 450 KHz  
: 36 dBu  
31  
 
SPECIFICATIONS  
Supply voltage:  
Discs played:  
Compositive video 1.0Vp-p 75Ω  
(1) 5” (12 cm) DVD-VIDEO disc  
(2) Compact disc (CD-DA/CD-R/CD-RW/MP3)  
(3) 5” (12 cm) VIDEO CD  
Note:  
Specifications and design are subject to modification, without notice, due to  
improvements in technology.  
CAUTION:  
To avoid electric shock, this unit must not be exposed to dripping water or water  
splash.  
• Minimum distances around the apparatus for sufficient ventilation.  
• The ventilation should not be impeded by covering the ventilation openings with  
items, such as newspapers, table-cloths, curtains, etc.  
• No naked flame sources, such as lighted candles, should be placed on the apparatus.  
• The use of apparatus in tropical and/or moderate climates.  
• Before scrapping the appliance, remove the batteries and place them in the  
appropriate battery collection container.  
This product incorporates copyright protection technology that is protected by  
method claims of certain U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights owners. Use of this  
copyright protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision Corporation. Reverse engineering  
or disassembly is prohibited.  
88-V1005-  
32  
 

Pelco Video Game Keyboard KBD960 User Manual
Phase Technology Speaker RS600i User Manual
Philips Car Stereo System CEM2000B User Manual
Philips DVR HTS5710H User Manual
Philips Skin Care Product HB585 User Manual
Pioneer CD Player DEH P44 User Manual
Pioneer Speaker System S H810V User Manual
Pioneer Stereo System HTZ 575DV User Manual
Polycom Cordless Telephone VVX 1500 User Manual
Poulan Trimmer TE450 User Manual