PYLE Audio Home Theater System PSWLE81 User Manual

Part 55-Adjjusting diisplay and using cord management  
Route cords along articulating arms using cord management clips.  
Articulating arms can be adjusted to position display into desired location.  
Use wrench(8) to tighten and loosen the tension screw. Do not overtighten  
or overloosen to make the screws come out.  
INSTALLATION GUIDE  
Item No.:PSWLE81  
180°  
180°  
180°  
-5°~15°  
5°  
Wrench 4x4  
Thank you for choosing our product  
TV Size Range: 26"~42"  
Maximum Weight Capacity: 25kg/55lbs  
VESA: 400X400  
Pyle Audio  
1600 63rd st , Brooklyn, NY, 11204  
(718)236-8000  
Warning  
Safety automatic lock  
Unlock cord  
This product contains small items that could be a choking hazard if swallowed. Keep  
these items away from young children!  
1.Make sure these instructions are read and completely understood before attempting  
installation. If you are unsure of any part of this installation, contact a professional  
installer for assistance.  
www.pyleaudio.com  
CAUTION  
This product was designed to be installed on wood stud walls and solid concrete walls.  
Before installing make sure the supporting surface will support the combined load of the  
equipment and hardware. Never exceed the Maximum Load Capacity. This product is  
intended for indoor use only. Use of this product outdoors could lead to product failure or  
personal injury.The depth of this mount(1.3") may not provide sufficient space for proper  
ventilation on some screens. Please refer to the manufacturer’s requirements for mounting  
your screen befourinstallation.  
2.The wall or mounting surface must be capable of supporting the combined weight of  
the mount and the display; otherwise the structure must be reinforced.  
3.Safety gear and proper tools must be used. A minimum of two people are required  
for this installation. Failure to use safety gear can result in property damage, serious  
injury or death.  
-8-  
 
Part 3-Atttachingg bbrackets tto screen  
Part 1aa-Woodd SStud Mouunting  
Center brackets vertically on back of screen. Select the small(A),medium  
(B or C) or large(D) screws. Attach brackets to screen using four selected  
screws and four square washers(E) at the top and bottom of each bracket.  
Tighten screws firmly. Do not overtighten.  
Use wall plate(1) as a template, make sure it is level, and mark three  
mounting holes on the wood studs. Drill three 3/16(4.5mm)dia.holes 50  
mm deep. Level wall plate(1) and attach to wall with three long bolts(G) and  
three washers(F). Tighten screws firmly. Do not overtighten.  
Square washer(E)  
50mm  
E
Large hole for  
M8 screws  
A-D  
Medium hole for  
M5 and M6 screws  
Φ3/16(4.5mm)  
Small hole for  
M4 screws  
Stud finder  
Wood stud  
Magnetic removable  
bubble level  
F
G
-3-  
-6-  
 
Part 1b--Concrette Wall MMoounting  
Part 2-Atttachiing pllaastic coveers to wall plate  
Level wall plate and use wall as a template to mark three holes. Drill three  
7/16(10.5mm) dia. holes 58mm deep. Insert three anchors(H) into holes  
and secure wall plate with three long bolts(G) and three washers(F).Tighten  
screws firmly. Do not overtighten.  
Secure plastic covers over wall plate by pushing them toward each other  
until they lock in place.  
5
58mm  
Φ7/16(10.5mm)  
Concrete Wall  
If you think the ribbon is too long, You can hide it at the back of the  
televesion,once you want to uninstall the TV, it can help you to take out the  
brackets.  
Magnetic removable  
bubble level  
H
F
G
3
-5-  
-4-  
 

Peavey Speaker System SP 4Ti User Manual
Peavey Stereo Amplifier M 2600 User Manual
Philips Cordless Telephone SE4352S User Manual
Philips Universal Remote PM435 User Manual
Pitco Frialator Pasta Maker Compact Pasta Control User Manual
Powermate Portable Generator PM0601250 User Manual
Powerware Power Supply UPS20 30kVA User Manual
Pride Mobility Network Card Dynamic DX User Manual
Prince Castle Pasta Maker 630 ROM4 User Manual
PYLE Audio Home Theater System PLE702B User Manual