Phase Technology Speaker RS400i User Manual

Open-Celling Speaker  
RS400i  
Technical Information for System Engineers  
Key Features  
• BroadBeam® waveguide technology  
delivers a consistent dispersion pattern  
up to 10 kHz for maximum coverage  
area per speaker (EASEdocumented).  
• One 102 mm (4 in) polypropylene  
woofer and one 25 mm (1 in) convex alu-  
minum tweeter with FerroFluid cooling.  
Specifications: RS400i  
System Type  
4” coaxial, open-ceiling, ported (20 Watt transformer  
for 25/70.7/100 Volt or voice coil/4 Ohm applications)  
94 Hz - 22 kHz  
72 Hz  
40 Watts  
20 Watts  
98 dB  
88 dB  
85 dB  
• Weatherized components for indoor &  
outdoor applications.  
Frequency Response (- 3 dB)1  
Low Frequency (-10 dB)1  
Max. Program Power  
Max. Continuous Power RMS2  
Max. SPL dB @ 1 M  
Sensitivity dB @ 1W/1M (2.83V)3  
Sensitivity dB @ 1W/1M4  
Impedance (nominal)  
• Includes hanging hardware with aircraft  
cables and integrated SpeedClamp™  
self-locking wire grip for fast, easy &  
secure installation. Also includes Euro-  
block connector & terminal weather  
boot.  
4 Ohm  
• Patented ZeroReflectionenclosure  
technology for optimal sound reproduc-  
tion & cabinet rigidity.  
Coverage Angle (-6 dB @ 2 kHz)  
Coverage Angle (-6 dB @ 10 kHz)  
Directivity Factor (Q)  
Directivity Index (DI)  
Tap Selector  
100º  
73º  
3.04 (Averaged 100 Hz - 10 kHz); 4.7 @ 2 kHz  
4.1 dB (Averaged 100 Hz - 10 kHz); 6.8 dB @ 2 kHz  
Weather-proof 5-position tap switch w/ voice coil/4 Ohm direct  
• Easy access 5-position selectable tap  
switch for 25, 70.7 and 100 Volt applica-  
tions with voice coil/4 Ohm direct sim-  
plifies ordering & inventory tracking.  
Transformer Taps  
70.7 V  
20w  
10w  
5w  
Output  
98w  
95w  
92w  
89w  
100 V  
20w  
10w  
5w  
Output  
98w  
95w  
25 V  
3w  
1w  
0.63w  
0.31w  
Output  
89w  
86w  
83w  
80w  
• Iridite-plated steel grille with protective  
powder-coated finish for lasting durability.  
92w  
• High-quality black or white paint finish.  
Custom paint colors optional.  
3w  
• Optional surface-mount bracket.  
Transducer  
Low-Frequency Driver  
High-Frequency Driver  
Low Frequency Voice Coil  
Crossover Frequency  
1 x 102 mm (4 in) Polypropylene cone, butyl rubber surround  
25 mm (1 in) Convex aluminum tweeter with waveguide  
25 mm (1 in)  
2.27 kHz  
Description  
The RS400 is a 4” coaxial, ported speaker  
with an open-ceiling enclosure design.  
Hanging hardware is included & fea-  
tures a SpeedClampself-locking wire  
grip for fast, easy & secure installation.  
SoundTube’s custom-engineered driver  
and electro-acoustic network delivers  
high-performance sound in a cost-effective  
speaker design. The RS400i speaker incorpo-  
rates a low-profile grille and a 5-position tap  
switch with voice coil/4 Ohm direct.  
Network Type  
Low Pass  
High Pass  
Enclosure Material  
Grille Material  
Inputs  
Color Options  
Diameter  
12 dB per octave, 2nd order  
12 dB per octave, 2nd order  
Injection molded ABS  
Iridite-plated steel with powder-coat finish  
4 Pin, 5 mm Euroblock for individual or daisy chain connection  
Black, white or custom colors available  
197 mm / 7.7 in  
Total Height  
Weight  
229 mm / 9.0 in  
1.8 kG / 3.9 lbs  
Shipping Weight  
3.2 kG / 7.1 lbs  
Applications  
Accessories  
Included  
Optional  
Designed for indoor & outdoor back-  
ground to mid-level SPL applications, the  
RS400i includes a single-point mounting  
system for rapid open-ceiling installations.  
Cost-effective engineering with high-per-  
formance sound makes the RS400i speaker  
ideal for music & paging applications in  
retail, grocery stores, restaurants, hotels,  
casinos, museums, trade shows & confer-  
ence rooms. For applications where addi-  
tional bass is required, SoundTube’s RS801i  
8” subwoofer provides bass down to 40 Hz.  
Hanging hardware, Euroblock connector & terminal weather boot  
Surface-mount bracket (AC-RS-SM5)  
1 Per box  
Packaging  
1
2
3
4
Frequency response is measured in full space.  
Continuous power rating, EIA-426-B test.  
Average over published frequency response range.  
1w1m sensitivity based on voltage required to yield 1w based on the minimum system impedance.  
SoundTube continually develops new product innovations and improvements. Updates to existing  
products without prior notice are an example of SoundTube’s drive for constant improvement.  
©2006 SoundTube Entertainment, Inc. All rights reserved. PN TS-CM600 REV11.13.06  
 
Open-Celling Speaker  
RS400i  
Preliminary Technical Information for System Engineers  
meter) shall be at least 88 dB. The speaker  
shall have a nominal impedance of 4  
Ohms and be available for 25, 70.7 & 100  
Volt modes with voice coil/4 Ohm direct.  
The frequency dividing network shall  
have a crossover frequency of 2.27 kHz  
with slopes of 12 dB per octave ( 2nd order)  
for both low and high pass filters. Rated  
power capacity shall be at least 20 Watts con-  
tinuous power (RMS) and conform to EIA-  
426-B testing. Maximum continuous output  
at 1 meter shall be 98 dB.  
SoundTube Entertainment actively defends  
its patents in order to protect SoundTube  
resellers and end users.  
20/Outline/EASEinterface.  
EASE™ Data – 3-D polar plots.  
SoundTubeSPEC™ – Proprietary  
SoundTube speaker placement software.  
Technical Data and  
Specification Tools  
Technical assistance:  
SoundTube SPEC™ software  
and engineering support  
Technical Data  
SoundTube Entertainment strives to  
provide complete and effective techni-  
cal information and data to dealers,  
engineers and designers. All data are  
available from SoundTube Entertain-  
For quick and easy specification,  
visit www.soundtube.com and use  
SoundTube’s proprietary specification  
software. For technical assistance,  
including detailed EASE™ plots, con-  
tact SoundTube Entertainment directly  
at [email protected] or call us  
at 435-647-9555 or 800-647-8823.  
The low-frequency transducer shall  
have a polypropylene cone with butyl  
rubber surround. The high-frequency  
transducer shall be constructed of alu-  
minum with a proprietary BroadBeam®  
waveguide.  
Data Acquisition  
All performance data acquired at  
SoundTube’s Technical Measurement  
Center (TMC) are analyzed using a  
variety of standard measurement tech-  
niques, including Measured Length  
Sequence (MLS) and Time Delay  
Spectrometry (TDS). Performance,  
development and data acquisition  
tools include: Gold Line TEF 20,  
CLIO, LMS, LEAP, and proprietary  
modeling software. EASEdata are  
acquired through an automated TEF  
Architectural Specifications  
Installation and safety attachment  
for the RS400i shall be by aircraft cable  
affixed to the speaker chassis via an  
integrated forged aluminum clasp with  
safety gate. The external wiring input  
connector shall be a 4-pin, 5 mm Euro-  
block for 4 Ohm or distributed systems  
and shall accept from 10 – 22 gauge  
wire. The system shall be for indoor  
The loudspeaker shall consist of a  
102 mm (4 in) polypropylene woofer  
and one 25 mm (1 in) convex aluminum  
tweeter with FerroFluid cooling.  
Performance specifications of a typical  
production unit shall be as follows: Use-  
able frequency response shall extend to  
72 Hz (-10 dB, no external equalization).  
Measured sensitivity (2.83 Volt input, 1  
Polar Plots  
250 Hz  
500 Hz  
1,000 Hz  
125 Hz  
 
 
 
 
 
�  
 
�  
 
�  
 
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
 
 
 
 
 
 
 
 
 
 
 
 
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
4,000 Hz  
8,000 Hz  
10,000 Hz  
2,000 Hz  
 
 
 
 
 
�  
 
�  
 
�  
 
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
 
 
 
 
 
 
 
 
 
 
 
 
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com  
 
Open-Celling Speaker  
RS400i  
Preliminary Technical Information for System Engineers  
Mechanical Drawings  
& outdoor applications and shall have a  
weather-resistant terminal boot covering  
all wire connectors.  
The enclosure shall be constructed of  
injection-molded ABS. The grille shall  
be constructed of iridite-plated, powder-  
coated steel for lasting performance in  
the elements. Overall cabinet dimensions  
shall be no more than 197 mm (7.7 in) in  
height by 224 mm (8.8 in) in diameter. The  
RS400i shall include hanging hardware,  
Euroblock connector and weather-resistant  
terminal boot.  
228.6 mm  
(9.0 in)  
The system shall be the SoundTube  
RS400i with hanging hardware for both  
low & high impedance applications.  
SoundTube Entertainment  
6430 North Business Park Loop  
Park City, Utah 84098  
197 mm (7.7 in)  
Phone 435.647.9555  
Included Accessories  
Fax  
435.647.9666  
Toll Free 800.647.TUBE  
All SoundTube products come  
with a 5-year limited warranty.  
Hanging Hardware: Main & Safety  
Cables w/ SpeedClamp™  
SoundTube’s hanging cable kit incorpo-  
rates hanging & safety cables & Speed-  
Clamp™ self-locking cable clamps for  
an integrated and easy-to-install system.  
Hanging & safety cables are infinitely  
adjustable to 2.74 M (9.0 ft).  
Optional Accessories  
Surface-Mount Bracket (AC-RS-SM5)  
SoundTube Entertainment manufactures a complete line of speakers for:  
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing  
All SoundTube products are designed and engineered in the USA.  
 

Peerless Industries TV Mount HP450 User Manual
Peerless Industries TV Mount MM746PU User Manual
Philips Baby Accessories SCF643 75 User Manual
Philips Car Stereo System 21PT9457 User Manual
Philips CD Player MG9218 User Manual
Philips Clock Radio AJ3112 User Manual
Philips Portable CD Player 150X3M User Manual
Philips Portable CD Player ND1110 User Manual
Polycom Telephone 1725 36092 001 User Manual
Pride Mobility Mobility Aid KD User Manual