1
Return yourWarranty Registration card today to
User guide
2
1
ensure you receive all the benefits you’re entitled to
.
• Once your Magnavox purchase is
• So complete and return theWarranty
registered, you’re eligible to receive all the Registration Card enclosed with your
privileges of owning a Magnavox product. purchase at once, and take advantage
of these important benefits.
MCR-600
CD CLOCK RADIO
Warranty
Owner
Model
Verification
Confirmation Registration
R
Registering your product
within 10 days confirms
your right to maximum
protection under the
Your completed Warranty Returning your Warranty
Registration Card serves Registration Card right
as verification of owner- away guarantees you’ll
ship in the event of prod- receive all the information
3
4
5
Need help? Call us!
Return
Magnavox representatives are ready to help you with
any questions about your new product. We can guide
you through Connections, First-time Setup, or any of
the Features.We want you to start enjoying your
new product right away!
your Warranty
Registration Card
within 10 days
terms and conditions of
your Magnavox warranty.
uct theft or loss.
and special offers which
you qualify for as the
owner of your model.
Y
0
CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!
9
Know these
1-800-705-2000
For Customer Use
8
or
Enter below the Serial No. which is locat-
ed on the bottom of the cabinet. Retain
this information for future reference.
7
6
safetysymbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Model No. ______________________
Serial No. _______________________
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indi-
cates uninsulated material
within your unit which may
WARNING: TO REDUCETHE
RISK OF FIRE OR ELECTRIC SHOCK,
THIS SHOULD NOT EXPOSEDTO RAIN
OR MOISTURE, AND OBJECTS FILLED
WITH LIQUIDS, SUCH ASVASES, SHOULD
NOT BE PLACED ONTHIS APPARATUS.
#
cause an electrical shock. For the
safety of everyone in your household,
please do not remove product covering.
The “exclamation point”
calls attention to features for
which you should read the
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
@
!
enclosed literature closely to prevent
operating and maintenance problems.
MAC5097
LIMITED WARRANTY
IMPORTANT SAFETY INSTRUCTIONS
PORTABLE AUDIO
90 Days Free Exchange
PHILIPS CONSUMER ELECTRONICS NORTH AMERICA
This product must be carried in for an exchange.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12.
Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus.When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
Knoxville, Tennessee 37914-1810, U.S.A.
WHO IS COVERED?
BEFORE REQUESTING EXCHANGE…
You must have proof of purchase to exchange the product.A Please check your owner's manual for assistance. If you
sales receipt or other document showing that you purchased have additional questions, call us at 1-800-705-2000.
the product is considered proof of purchase.Attach it to this
4. Follow all instructions.
owner’s manual and keep both nearby.
EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO, OR U.S.VIRGIN ISLANDS…
Contact 1-800-705-2000 to arrange an exchange. Or, ship
5. Do not use this apparatus near
water.
WHAT IS COVERED?
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
Warranty coverage begins the day you buy your product. For the product, insured and freight prepaid, and with proof of
Meet Magnavox at the Internet
90 days thereafter, a defective or inoperative product will be
replaced with a new, renewed or comparable product at no
charge to you.A replacement product is covered only for
the original warranty period.When the warranty on the
original product expires, the warranty on the replacement
product also expires.
purchase enclosed, to the address listed below.
6. Clean only with dry cloth.
Magnavox Exchange Program
Suite A
406 North Irish Street
Greeneville TN 37745
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer´s instructions.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied
warranties, including implied warranties of merchantability
and fitness for a particular purpose, are limited in duration
to the duration of this express warranty. But, because some
states do not allow limitations on how long an implied
warranty may last, this limitation may not apply to you.)
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
WHAT IS EXCLUDED?
Your warranty does not cover:
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
•
labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna systems outside of the
product.
product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause
not within the control of Magnavox.
9. Do not defeat the
safety purpose of the
polarized or
grounding-type plug.
A polarized plug has two blades with one
wider than the other.A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
EXCHANGING A PRODUCT IN CANADA…
Please contact Magnavox at:
•
15.Battery usage CAUTION –To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit:
AC Polarized
Plug
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish Speaking)
•
•
reception problems caused by signal conditions or
cable or antenna systems outside the unit.
W
CLASS 1
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or fitness
for a particular purpose. Magnavox is not liable under any
circumstances for any direct, indirect, special, incidental or
consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
MCR600
G
G
G
Install all batteries correctly, + and - as
marked on the unit.
•
incidental or consequential damages resulting from the
product. (Some states do not allow the exclusion of
incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is not
limited to, prerecorded material, whether copyrighted
or not copyrighted.)
Do not mix batteries (old and new or
carbon and alkaline, etc.).
REMEMBER…
Remove batteries when the unit is not used
for a long time.
Please record below the model and serial numbers found
on the product.Also, please fill out and mail your warranty
registration card promptly. It will be easier for us to notify
you if necessary.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
•
a product used for commercial or institutional purposes.
LASER PRODUCT
16.Apparatus shall not be exposed to
dripping or splashing.
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where the
product is officially distributed by Magnavox. In countries
where Magnavox does not distribute the product, the local
Magnavox service organization will attempt to provide a
replacement product (although there may be a delay if the
appropriate product is not readily available).
MODEL # __________________________________
17.Do not place any sources of danger
on the apparatus (e.g. liquid filled
objects, lighted candles).
11.Only use attachments/accessories
specified by the manufacturer.
SERIAL #
__________________________________
18.This product may contain lead and mercury.
Disposal of these materials may be regulated
due to environmental considerations.
For disposal or recycling information,
please contact your local authorities
or the Electronic Industries Alliance :
EL 6475-E005: 04/01
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Class II equipment symbol
(402) 536-4171
LC/bk WK410 Issue 1
Printed in China
Magnavox, P.O. Box 520890, Miami, FL 33152, USA,
This symbol indicates that the unit has a double insulation system.
EL6516T002 / 8-02
English
CONTROLS
POWER SUPPLY
BASIC FUNCTIONS
This set runs on AC power.
0 POWER
! Power cord
@ battery compartment
battery (for memory backup power supply only).
Power cord posts for wrapping the power cord
so that excess cord does not hang down
–
switches the CD/ tuner function on/off.
CONTROLS (see Fig. 1)
Switching CD/ Tuner on/off
We recommend you also insert a 9V battery for
memory back-up power supply. In the event of a
power interruption, this will help safeguard the clock,
timer settings and preset radio stations. To save ener-
gy, the display switches off and you will not be able
to operate the CD/ Tuner functions.
–
connect to AC power supply.
Open to insert 1 x 9V
TIMER
CH
SLEEP
REPEAT
TRACK MEMORY
TIME
1 Source selectors – selects CD or TUNER function.
REMAIN
STEREO
CD
FM AM
PM
–
2 BAND – selects FM/AM wavebands;
TUNER
2;
–
starts or pauses CD playback;
BAND
SEARCH/TUNING
#
–
SEARCH/TUNING ∞ , §
CD : skips or searches a CD track/passage backward
or forward;
TUNER : tunes to radio stations;
CLOCK : adjusts the hours/minutes for clock time;
:
TIMER
REPEAT/PRESET
POWER
10
3
1
AC power
1. To switch on, press POWER.
1. Check if the AC power supply, as shown on the
type plate located on the
bottom of the set, corre-
sponds to your local
power supply. If it does
not, consult your dealer or
service center.
➜The set automatically powers on the last sound
9
–
stops CD playback
– erases a CD program.
PROG/CLOCK
source played.
Supplied Accessories
Mounting kit:
– 4 x spacers
– 4 x “Phillips” head screws
– 1 x mounting template
2. Press CD or TUNER to select your desired
function.
:
CD : programs tracks and review the program;
TUNER : programs preset radio stations;
CLOCK : sets the clock time.
3. To switch off, press POWER.
➜The set returns to clock standby mode.
2. Connect the power cord to the wall outlet. The set
is now ready for use.
Adjusting volume
3 Display – shows the status of the set.
For mounting instructions, please refer to 'How
to Mount MCR600'
.
4 OPEN•CLOSE – press to open/close the CD
•
Adjust the CD/ Tuner volume with the VOLUME
control.
Helpful Hints:
– To disconnect the power supply, unplug the set from
the wall outlet.
compartment.
5 VOLUME – adjusts volume level.
EP
TIME
MAIN
STEREO
MHz
KHz
6 SLEEP – activates/ deactivates sleep timer
function to automatically switch off tuner/ CD
playback;
– Disconnect the power supply to protect your set
during heavy thunderstorms.
CH/TUNING
PROG/CLOCK
VOLUME
– adjusts sleep timer options.
REPEAT/PRESET
DISPLAY
SLEEP
CAUTION
1
To reduce the risk of fire, do not place any
heating or cooking apparatus beneath this
unit.
Backup battery (not included. See 1)
7 DISPLAY – toggles to show clock time /elapsed
CD play time or remaining CD playback time.
•
Insert 1 x 9V battery (preferably alkaline) with the
correct polarity.
Setting the clock
8 REPEAT/PRESET
The clock is displayed using the 12-hour clock with
PM and AM indicators.
– repeats a CD track/program/the entire CD;
Helpful Hints:
To prevent obstruction or danger, use the
power cord posts to wrap the power cord
so that excess cord does not hang down.
-- selects a preset radio station.
– Change the battery twice a year or as often as
required to ensure fresh battery supply and to
prevent battery leakage. To safeguard the clock,
timer and preset station settings, keep the set
connected to AC power when replacing the battery.
TIMER
CH
SLEEP
REPEAT
TIME
TRACK MEMORY
REMAIN
STEREO
9 TIMER – alarm timer with 3 setting options: 10, 3
FM AM
PM
and 1 minute.
BAND
SEARCH/TUNING
PROG/CLOCK
– Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or cause
the batteries to burst.
1. Check you have switched off the CD/Tuner.
2. Press PROG/CLOCK to activate clock setting.
➜The respective hour/ minute setting flashes.
3. Use SEARCH/TUNING ∞ , § to adjust the
hours/ minutes.
Batteries contain chemical substances, so they
should be disposed of properly.
4 Press PROG/CLOCK to store the hour/ minute
setting.
CD PLAYER
SLEEP
Programming tracks
Reviewing the program
About SLEEP
About TIMER
Program in the stop position to select and store
your CD tracks in the desired sequence. If you like,
store any track more than once. Up to 20 tracks
(P-01 - P-20) can be stored in the memory.
In the stop position, press PROG/CLOCK once or
repeatedly to display all the stored tracks in sequence.
This set has a built-in "sleep" timer which enables
the set to be automatically switched off during
CD/ tuner playback after a selected period of time.
You can choose from 9 sleep time options
(90, 80, 70....10 minutes).
The TIMER is an alarm beeper function.
With the TIMER buttons 10, 3 or 1, you can set a
time (minimum 1 minute, maximum 99 minutes) to
activate a beeper during clock standby mode, or CD/
tuner playback.
TRACK
BAND
SEARCH/TUNING
PROG/CLOCK
TRACK MEMORY
SLEEP
TIME
TRACK
BAND
SEARCH/TUNING
PROG/CLOCK
BAND
SEARCH/TUNING
PROG/CLOCK
BAND
SEARCH/TUNING
PROG/CLOCK
Erasing the program
You can erase the contents of the memory by:
TIMER
REPEAT/PRESET
DISPLAY
SLEEP
POWER
TIMER
REPEAT/PRESET
DISPLAY
SLEEP
POWER
10
3
1
•
•
•
opening the CD door;
selecting TUNER;
pressing 9 twice during playback or once in the
10
3
1
1. Press PROG/CLOCK to activate programming.
➜Display: TRACK MEMORY flashes.
you to select a track number.
the start of the program.
prompts
indicates
To set a TIMER period:
Setting SLEEP
To select the 90 minute SLEEP option:
stop position.
The TIMER period increases by steps of 10, 3 or 1, or
their multiples. You can also press a combination of
the TIMER digits to set the TIMER alarm.
•
During CD/ tuner playback, briefly press SLEEP
DISPLAY
2. Press ∞ or § to select your desired track.
once.
•
Press 10, 3 or 1 once, or repeatedly to set/ adjust
the time.
,
3. Press PROG to confirm.
➜Display shows SLEEP and
.
TRACK
REMAIN
➜Display: TRACK MEMORY flashes.
to select a track number.
indicate the next program location available.
prompts you
appears to
To select other SLEEP time options:
1. During CD/ tuner playback, press and hold SLEEP.
➜Display shows SLEEP and the options in
➜Display: TIME appears.
BAND
SEARCH/TUNING
PROG/CLOCK
E.g. to set TIMER for :
•
•
1 minute, press 1.
17 minutes, press 10, 3, 3, 1.
4. Repeat 3-4 to select and store all desired tracks.
TIMER
REPEAT/PRESET
DISPLAY
SLEEP
POWER
,
,
,
,
,
,
sequence:
10
3
1
,
,
,
Helpful Hints:
•
Press DISPLAY once or more to toggle to check
the clock time during CD/ Tuner playback.
Helpful Hints:
– The beeper is set at a fixed volume and cannot be
adjusted.
*
2. Release SLEEP when your desired option appears.
– If you fail to execute any action within 7 seconds
after pressing PROG/CLOCK, programming will
stop and you will need to start again.
To cancel the SLEEP timer, you can either:
Helpful Hints:
• Press SLEEP briefly once again.
• Press POWER.
➜Display: SLEEP disappears.
To cancel TIMER
For CDs, you can also select to view: elapsed CD
play time or ‘REMAIN’ remaining CD playback
time.
•
During the beeper alarm: press any of the TIMER
buttons, 10, 3 or 1.
Before the TIMER goes off: press 10 once or
*
To start playback of your program
•
Press 2;.
•
– Viewing the remaining CD playback time is not
repeatedly until
appears and TIME disappears.
available during CD playback in any REPEAT mode.
TUNER
CD PLAYER
Playing a CD
Selecting a different track, ∞ / §
Tuning to stations
PRESETS: programming tuner stations
You can store up to 40 radio stations in the memory
(20 FM and 20 AM).
This CD player plays Audio Discs including CD-
Recordables. Do not try to play MP3 CD-ROMs, CD-Is,
CDV, VCDs, DVDs, computer CDs or CD-Rewritables.
TIMER
CH
SLEEP
REPEAT
TRACK MEMORY
TIME
REMAIN
STEREO
CD
FM AM
PM
MHz
KHz
TUNER
TIMER
CH
SLEEP
TIME
BAND
SEARCH/TUNING
TRAC MEMORY
REMAIN
STEREO
BAND
SEARCH/TUNING
PROG/CLOCK
FM
PM
MHz
KHz
TIMER
REPEAT
CH
TRACK
CD
FM AM
PM
TIMER
REPEAT/PR
POWER
BAND
SEARCH/TUNING
PROG/CLOCK
10
3
1
During playback,
Briefly press ∞ or § once or repeatedly until you
find your desired track.
TUNER
BAND
SEARCH/TUNING
PROG/CL
DISPLAY
TIMER
REPEAT/PRESET
DISPLAY
SLEEP
POWER
10
3
1
TIMER
REPEAT/PRESET
POWER
1. Press POWER to on, then select TUNER.
2. Press BAND once or more to select your desired
waveband, FM or AM.
10
3
1
During stop or pause,
Press 2; to start playback after your desired track is
selected.
1. Tune to your desired station (see Tuning to sta-
tions).
3. Tuning to stations:
•
1. Press POWER to on, then select CD.
2. Press OPEN CLOSE to open the CD compartment.
3. Insert a CD with the printed side facing up and
press OPEN CLOSE to close the CD compartment.
➜Display shows: , and then the
Press down on SEARCH/TUNING ∞ or § and
release the button when the frequency in the dis-
play starts running.
➜The radio automatically tunes to a station of
sufficient reception.
To tune to a weak station, press ∞ or § briefly
and repeatedly until you have found optimal
reception.
2. Press PROG/CLOCK to activate programming.
➜Display: MEMORY flashes and CH XX appears,
where XX denotes a preset location.
3. Press REPEAT/PRESET once or more to select a
preset number, 1-20.
Finding a passage within a track
•
1. During playback, press and hold ∞ or §
➜ The CD is played at high speed and low volume.
.
•
2. When you recognize the passage you want, release
total track number and total playing time.
appears if no disc is inserted, or
you have inserted a non-finalized CD-R(W).
•
∞ or §
.
4. Press PROG/CLOCK to confirm.
➜
➜Display shows: the preset number, waveband
and the frequency of the preset station.
5. Repeat the above steps to store other stations.
Selecting different playing modes: REPEAT
➜ 01 and total playing time, if your CD contains
non-audio/ MP3 files.
4. Press 2; to start playback.
➜ Display shows: the current track number,
elapsed playing time and 2.
5. To pause playback press 2;. Press 2; again to
resume play.
4. Repeat step 3 if necessary until you find the
Before or during CD playback, you can select a
REPEAT mode.
desired station.
Helpful Hints:
– If you fail to execute any action within 7 seconds
after pressing PROG/CLOCK, programming will
stop and you will need to start again.
REPEAT
TRACK
To improve radio reception
For FM, extend and adjust the AC power cord.
BAND
SEARCH/TUNING
PROG/CLOCK
– You can erase a preset station by storing another
frequency in its place.
➜ Time digits flash during pause.
6. To stop CD playback, press 9.
TIMER
REPEAT/PRESET
DISPLAY
SLEEP
POWER
10
3
1
Helpful Hints:
To listen to a preset station
•
•
To repeat the entire CD or a program, press
REPEAT/PRESET once.
➜Display: REPEAT appears.
To repeat a current track, press REPEAT/PRESET
twice.
The CD playback will also stop when:
– the CD compartment is opened.
– the CD has reached the end
– you select another sound source.
•
Press REPEAT/PRESET once or more until the
desired preset station is displayed.
CH
STEREO
FM AM
MHz
KHz
➜Display: REPEAT flashes.
• Press 2; to start playback if you have selected
REPEAT in the stop or pause position.
BAND
SEARCH/TUNING
PROG/CLOCK
TIMER
REPEAT/PRESET
DISPLAY
SLEEP
POWER
To resume normal playback
10
3
1
•
Press REPEAT/PRESET once or more until REPEAT
disappears from the display.
TROUBLESHOOTING
MAINTENANCE AND SAFETY
CD player and disc handling (see 2)
Safety Information (see 2)
If a fault occurs, first check the points listed below before taking the set to repair. If you are unable to rem-
edy a problem by following these hints, consult your dealer or service center.
WARNING: Do not open the set as there is a risk of electric shock! Under no
circumstances should you try to repair the set yourself, as this will invali-
date the warranty.
•
If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the
set to repair.
•
Don't expose the set, batteries, CDs or cassettes
to humidity, rain, sand or excessive heat.
•
Clean the set with a dry cloth. Don't use any
cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the set.
•
•
The lens of the CD player should never be
touched!
No sound/power
indication
Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens, but leave the set in a
warm environment until the moisture evaporates.
•
•
Place the set on hard and flat surface so that the
system does not tilt. Make sure there is good
ventilation to prevent the set overheating.
– Volume not adjusted.
– No CD inserted.
• Adjust the VOLUME.
• Insert a suitable disc.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
– Power cord not securely connected.
• Connect the AC power cord properly.
– CD badly scratched or dirty.
• Replace/clean CD (See Maintenance).
– Laser lens steam up.
•
•
Always close the CD door to avoid dust on the
lens.
– Electrostatic discharge/interference.
• Unplug the set and remove battery from the battery
compartment. Then, replug /replace battery. Try acti-
vating the set again.
•
•
Apparatus shall not be exposed to dripping or
splashing.
• Wait until lens has cleared.
To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
and total playing time indication
Do not place any sources of danger on the appa-
ratus (e.g. liquid filled objects, lighted candles).
– CD-ROM disc inserted/CD contains non-audio files.
• Use CD Audio discs only, or press SEARCH ∞ , §
once or more skip the data file to a suitable audio
track.
– CD contains non-audio files.
•
Never write on a CD or attach any stickers to it.
•
Press SEARCH ∞ or § once or more skip the data
file to a suitable audio track.
Severe radio hum or noise
The CD skips tracks
– Electrical interference: set too close to TV, VCR or
– CD damaged or dirty.
computer.
• Replace or clean CD.
Canada
• Move the set/ TV, VCR or computer to increase the
distance.
–
Program is active
• Switch off program.
English:This digital apparatus does not exceed the Class B limits for radio noise emis-
sions from digital apparatus as set out in the Radio Interference Regulations of the Cana-
dian Department of Communications.
Poor radio reception
– Weak radio signal.
• FM: Extend and adjust AC power cord.
Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les
limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur
le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada.
Environmental information
The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that
may cause undesired operation.
We have done our best to reduce the packaging and make it easy to separate into 3 materials:
cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging, dead batteries and old equipment.
|