Philips DVD Player DVD703 782 User Manual

DVD-703  
DVDVideo Player  
 
Index  
English -------------------------------------------------------- 5  
Français------------------------------------------------------21  
Español ------------------------------------------------------37  
Português ---------------------------------------------------53  
4
The region code for this set is 4.  
Since it is usual for DVD movies to be released at  
different times in different regions of the world, all  
players have region codes and discs can have an optional  
region code. If you load a disc of a different region code  
to your player, you will see the region code notice on  
the screen.The disc will not play and should be  
unloaded.  
NOTE:  
PICTURES SHOWN MAYBE DIFFERENT  
BETWEEN COUNTRIES.  
NEVER MAKE OR CHANGE CONNECTIONS  
WITH THE POWER SWITCHED ON.  
CAUTION  
VISIBLE AND INVISIBLE LASER RADIATION  
WHEN OPEN AVOID EXPOSURE TO BEAM  
(WARNING LOCATION: INSIDE ON LASER  
COVERSHIELD OR THE BACKPLATE OF SET)  
INDEX  
3
 
Contents  
Introduction  
Philips DVD-Video Introduction ------------------------- 5  
Unpacking ---------------------------------------------------- 5  
Remote Control battery installation-------------------- 5  
Safety Information ------------------------------------------ 5  
Cleaning Discs ---------------------------------------------- 5  
Functional Overview  
Front and Rear Panels ------------------------------------- 6  
Remote Control -------------------------------------------- 7  
Preparation  
General Notes ---------------------------------------------- 8  
Connecting to aTV ---------------------------------------- 8  
Connecting to Optional Equipment-------------------8-9  
NTSC/PAL Settings----------------------------------------- 9  
General Explanation --------------------------------------- 9  
Menu Bar/StatusWindow --------------------------------10  
Temporary Feedback Field Icons -----------------------10  
Personal Preferences----------------------------------10-11  
Operation  
Loading Discs-----------------------------------------------12  
Playing a DVD-Video andVideo CD -------------------12  
General Features --------------------------------------12-14  
Special DVD features -------------------------------------14  
SpecialVideo CD & SVCD features --------------------15  
Playing an Audio CD ----------------------------------15-16  
FavoriteTrack Selection (FTS) Program ---------------16  
Access Control  
Access Control: Child Lock -----------------------------17  
Access Control: Parental Control ------------------17-18  
Before Requesting Service  
Before Requesting Service -------------------------------19  
Specifications  
Specifications -----------------------------------------------20  
4
CONTENTS  
 
Introduction  
Philips DVD-Video  
Introduction  
Remote Control Battery  
Installation  
Your Philips DVD-Video player will play digital video discs  
conforming to the universal DVD-Video standard.With it,  
you will be able to enjoy full-length movies with true  
cinema picture quality, as well as stereo or multi-channel  
sound (depending on the disc and your playback setup).  
The unique features on DVD-Video, such as selection of  
sound track, subtitle languages and different camera angles  
(again depending on the disc), are all supported.  
Insert batteries as indicated inside the battery  
compartment.  
Caution: Do not mix old and new batteries. Never  
mix different types of batteries (standard, alkaline,  
etc.).  
-
+
In addition to DVD-Video discs, you will be able to play all  
Video CDs and Audio CDs (including finalized CD  
Recordable and CD Rewritable).  
+
-
DVD-Video  
You will recognize DVD-Video discs by the logo shown.  
Depending on the material on the disc (a movie, video clips,  
a drama series, etc.) the disc may have one or moreTitles.  
Safety Information  
DVD-VIDEO DISC  
TITLE 1  
TITLE 2  
Do not expose the system to excessive moisture, rain, sand,  
or heat sources.  
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2  
CHAPTER 3  
Place the player on a firm, flat surface.  
Keep the player away from domestic heating equipment  
and direct sunlight.  
In a cabinet, allow about 2.5 cm (1 inch) of free space all  
around the player for adequate ventilation.  
Video CD  
If the DVD-Video player cannot read CDs/DVDs correctly,  
use a commonly available cleaning CD/DVD to clean the  
lens before taking the DVD-Video player to be repaired.  
Other cleaning methods may destroy the lens.Always keep  
the tray closed to avoid dust on the lens.  
The lens may cloud over when the DVD-Video player is  
suddenly moved from cold to warm surroundings. Playing a  
CD/DVD is not possible then. Leave the power on for  
about one hour with no disc in the unit until normal  
playback is possible.  
You will recognizeVideo CDs by the logo  
shown.  
SuperVCD (SVCD)  
SVCD discs based on the SuperVCD IO Standard refering  
to Standard of Electronics Industry of the People’s Republic  
of China.  
Audio CD  
Audio CDs contain music tracks only.  
You will recognize Audio CDs by the logo  
shown.  
Cleaning Discs  
When a disc becomes dirty, clean it with a cleaning cloth.  
Wipe the disc from the center out, in a straight line.  
Do not use solvents such as benzine, thinner, commercially  
available cleaners, or anti-static spray intended for analog  
discs.  
Unpacking  
First check and identify the contents of your DVD-Video  
player package.  
You should have the following items.  
– DVD-Video player  
– Remote Control with batteries  
– Audio cable  
– Video cable  
– Instructions for use  
If any item is damaged or missing, contact your retailer or  
Philips.  
Keep the packaging material for future transportation.  
5
INTRODUCTION  
 
Functional Overview  
Front and Rear Panels  
T NEXT  
– go to next chapter or track  
POWER ON/OFF  
– switches the player to ON or OFF  
B PLAY  
– to start playback  
DISPLAY  
– shows the current status of the player  
SOUND  
– selects Stereo, Dolby Surround or  
3D Sound (TruSurround)  
DVD 703 DVD/VIDEO CD/CD PLAYER  
POWER ON/OFF  
SOUND  
PLAY  
PREV NEXT  
OPEN/CLOSE  
PAUSE  
STOP  
by  
/ OPEN/CLOSE  
– opens/closes the disc tray  
; PAUSE  
– to interrupt playback  
Disc Tray  
S PREV  
– go to previous chapter or track  
9 STOP  
– to stop playback  
S-VIDEO (VIDEO OUT)  
MAINS (AC Power)  
– connect to a TV with S-Video (Y/C) inputs  
– connect to power source  
PR/CR PB/CB Y (VIDEO OUT)  
COAXIAL (Digital audio out)  
– connect to a TV with PR/CR PB/CB Y inputs  
– connect to digital (coaxial) audio equipment  
CVBS (VIDEO OUT)  
– connect to a TV with CVBS video inputs  
AUDIO OUT (Left/Right)  
– connect to amplifier, receiver or stereo  
system  
DIGITAL AUDIO OUT  
PCM-MPEG2-Dolby Digital-DTS  
PR/CR  
Y
S-VIDEO  
PB/CB  
R
L
(CVBS)  
COAXIAL  
AUDIO OUT  
VIDEO OUT  
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause  
permanent damage to the unit.  
6
FUNCTIONAL OVERVIEW  
 
Remote Control  
POWER B  
– switches DVD ON or to standby/  
on mode  
RETURN / RESUME  
– go back to previous menu / to  
continue playback after play  
was stop  
0-9 numerical key pad  
– to select numbered items in a  
menu  
DISC MENU  
– access menu of a DVD disc  
DISPLAY  
– displays bit rate indicator during  
playback  
1 2 3 4  
– (left/right/up/down) to select  
an item in the menu  
OK  
SYSTEM MENU  
– access or remove the player’s  
menu  
– acknowledge menu selection  
S
– search backward* / go to a  
previous chapter or track  
T
– search forward* / go to the next  
chapter or track  
STOP ( 9 )  
– to stop playback  
SUBTITLE  
– select a subtitle language  
PLAY ( B )  
– to start playback  
ANGLE  
– select a DVD camera angle  
PAUSE ( ; )  
– pause playback temporarily /  
frame-by-frame playback  
ZOOM  
– enlarge video image  
AUDIO  
– select an audio language  
REPEAT  
– repeat chapter, track, title, disc  
REPEAT (A-B)  
– repeat a specific segment  
SHUFFLE  
– play tracks in random order  
SCAN  
– play of the first 10 seconds of  
each track/chapter within a disc  
* Press and hold key for about two seconds  
7
FUNCTIONAL OVERVIEW  
 
Preparation  
General Notes  
TV  
Depending on yourTV and other equipment you wish to  
connect, there are various ways you could connect the  
player. Use only one of the connections described below.  
Please refer to the manuals of yourTV,VCR, Stereo System  
or other devices as necessary to make the best  
connections.  
For better sound reproduction, connect the player’s audio  
out jacks to the audio in jacks of your amplifier, receiver,  
stereo or audio/video equipment. See ‘Connecting to  
optional equipment’.  
Z
A
X
Y
Caution:  
Make sure the DVD player is connected directly  
to theTV. Set theTV to the correct video input  
channel.  
DIGITAL AUDIO OUT  
PCM-MPEG2-Dolby Digital-DTS  
PR/CR  
P
B/CB  
Y
S-VIDEO  
R
L
(CVBS)  
COAXIAL  
AUDIO OUT  
VIDEO OUT  
Do not connect the players audio out jack to  
the phono in jack of your audio system.  
Do not connect your DVD player to theTV via  
yourVCR.The DVD image could be distorted by  
the copy protection system.  
Connecting to Optional  
Equipment  
Connecting to a TV  
Connecting to an amplifier equipped with  
two channel analog stereo or Dolby  
Surround  
Make one of the following connections, depending on the  
capabilities of your existing equipment.  
ComponentVideo (PR/CR PB/CB Y)  
connection  
1 Connect the Left and Right audio out jacks of the DVD  
player to the audio left and right in jacks on your amplifier,  
receiver or stereo system, using the supplied audio cable  
(A).  
1 Connect the PR/CR, PB/CB,Y video out jacks on the DVD  
player to the corresponding in jacks on theTV using an  
optional PR/CR, PB/CB,Y cable (Z).  
Connecting to an amplifier equipped with  
two channel digital stereo (PCM) or to an  
Audio/Video receiver equipped with a  
multi-channel decoder (Dolby Digital,  
MPEG 2 or DTS)  
2 Connect the Left and Right audio out jacks of the DVD  
player to the audio left/right in jacks on theTV (A).  
S-Video (Y/C) connection  
1 Connect the S-Video video out jack on the DVD player to  
the S-Video in jack on theTV using an optional S-Video  
cable (Y).  
1 Connect the player’s coaxial digital audio out jack to the  
corresponding coaxial digital audio in on your amplifier. Use  
an optional digital audio cable (F).  
2 Connect the Left and Right audio out jacks of the DVD  
2 You will need to activate the player’s digital output (see  
player to the audio left/right in jacks on theTV (A).  
‘Personal Preferences’).  
CVBS connection  
Digital Multi-channel sound  
The digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel Audio/  
Video receiver that supports one or more of the audio  
formats supported by your DVD player (MPEG 2, Dolby  
Digital™ or DTS). Check the receiver manual and the logos  
on the front of the receiver.  
1 Connect the CVBS video out jack on the DVD player to  
the video in jack on theTV using the video cable supplied  
(X).  
2 Connect the Left and Right audio out jacks to the audio  
left/right in jacks on theTV (A).  
8
PREPARATION  
 
General explanation  
AMPLIFIER  
About this manual  
This manual gives the basic instructions for operating the  
DVD player. Some DVDs require specific operation or  
allow only limited operation during playback.When this  
occurs, the symbol Ä appears on theTV screen, indicating  
that the operation is not permitted by the player or the  
disc.  
TV  
F
A
Y
X
Z
Remote control operation  
Unless stated, all operations can be performed by the  
remote control.Always point the remote control directly at  
the player, making sure there are no obstructions between  
the remote and the player.  
DIGITAL AUDIO OUT  
PCM-MPEG2-Dolby Digital-DTS  
PR/CR  
PB/CB  
Y
S-VIDEO  
R
L
(CVBS)  
COAXIAL  
AUDIO OUT  
VIDEO OUT  
Corresponding keys on the front panel of the player can  
also be used.  
Note:  
Menu bar operation  
– If the audio format of the digital output does not match the  
capabilities of your receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
– Six Channel Digital Surround Sound via digital connection  
can only be obtained if your receiver has a Digital Multi-  
channel decoder.  
A number of operations can be done with the menu bar  
on the screen.The menu bar can be accessed by pressing  
the cursor keys on the remote control.  
Pressing SYSTEM MENU while the menu bar is displayed  
will clear the menu bar from the screen.  
The selected item will be highlighted, and the appropriate  
cursor keys to operate it will be displayed below the icon.  
The symbols < or > indicates that more items are available  
at the left/right of the menu bar. Press 1or 2to select  
these items.  
To see the selected audio format of the current DVD in the  
StatusWindow, press SYSTEM MENU or Audio.  
NTSC/PAL Settings  
You can switch the NTSC/PAL setting of the DVD player to  
match the video signal of yourTV.This setting only affects  
the television’s on-screen display that shows the stop and  
setup modes.You may select either NTSC or PAL.To  
change the DVD player setting to PAL or NTSC, follow the  
steps below.  
1 Press the POWER ON/OFF button on the front panel of  
the DVD player to turn OFF the DVD player.  
2 Press and hold 9and Ton the front of the DVD player.  
While holding 9and Tpress POWER ON/OFF.  
3 After PAL or NTSC appears on the display panel of the  
DVD player, release 9and Tat the same time.The PAL  
or NTSC indicator that appears on the display panel  
indicates the current setting.  
4 To change the setting, press Twithin three seconds.The  
new setting (PAL or NTSC) will appear on the display  
panel.  
9
PREPARATION  
 
Menu Bar/Status Window  
Personal Preferences  
As there are multiple menu bars, the items on the menu  
bar are arranged according to usage and availability of  
direct access keys. Pressing the SYSTEM MENU keys  
repeatedly will toggle through menu bar 1, menu bar 2,  
menu bar 3 and OFF.  
You can set your own personal preferences on the player.  
General operation:  
Press SYSTEM MENU on the remote control.  
Select in the menu bar.  
The Personal Preferences menu appears.  
Use the 1 2 3 4keys to toggle through the menus,  
submenus and submenu options.  
When a menu item is selected, the cursor keys (on the  
remote control) to operate the item are displayed next to  
the item.  
Press OK to confirm and return to the main menu.  
The following items can be adapted:  
Menu bar 1  
Personal Preferences  
Subtitle Language  
Audio Language  
Color  
Sound  
Menu bar 2  
Picture  
TV Shape  
Step by step playback  
Slow motion  
Fast motion  
Angle  
If you have a wide screen (16:9)TV, select 16:9.  
If you have a regular (4:3)TV, select 4:3.  
If you have a 4:3TV, you can also select between:  
Letterbox for a ‘wide-screen’ picture with black bars at the  
top and bottom of the screen, or Pan Scan, for a full-height  
picture with the sides trimmed. If a disc supports the  
format, the picture will be shown accordingly.  
Zoom  
Menu bar 3  
Title  
Chapter  
Black level shift (NTSC users only)  
Time Search  
Select ON for adapting the color dynamics to obtain richer  
contrasts.  
FavoriteTrack Selection (FTS)  
Temporary Feedback Field  
Icons  
Scan  
Repeat All  
RepeatTitle  
RepeatTrack  
Repeat Chapter  
Shuffle  
Video shift  
The factory centers the video on yourTV screen. Use this  
setting to personalize the position of the picture on your  
TV by moving it to the left or right.  
Shuffle Repeat  
Repeat A to end  
Repeat A-B  
Angle  
Child Lock On  
Child Safe  
Resume  
Action prohibited  
10  
PREPARATION  
 
Sound  
Features  
Digital output  
Access Control  
Factory setting:ALL.This means coaxial output is on. If you  
are not connecting equipment with a digital input, change  
the setting to OFF.  
Access Control contains the following features:  
Child Lock - When Child Lock is set to ON, a 4-digit code  
must be entered in order to play discs.  
If your equipment doesn't include a digital multi-channel  
decoder, set the digital output to PCM only (Pulse Code  
Modulation).  
Parental control - Allows the conditional viewing of DVDs  
containing Parental Control information (see ‘Access  
Control’).  
StatusWindow  
Displays the current status of the player and is displayed  
with the menu bar. When disc playback is stopped, it is  
displayed with the ‘Temporary Feedback Field’ in the default  
screen. See ‘On-Screen Display’ information.  
The factory setting is ON. Select OFF to suppress display of  
the Status Window.  
Analog output  
Select Stereo, Dolby Surround or 3D Sound (TruSurround)  
to match your system’s playback capability.  
Bit Rate Indicator  
When activated, the bit rate for video and audio as well as  
the total bit rate is displayed.This is only applicable during  
playback of DVD and SVCD discs.  
Night Mode  
Optimizes the dynamics of the sound for low volume  
playback.  
Karaoke vocal  
Help text  
Put this setting to ON only when a multi-channel karaoke  
DVD is being played.The karaoke channels on the disc will  
then be mixed into a normal stereo sound.  
When set to ON, help text describes the icons selected.  
Select OFF if you no longer require the help text.  
Language  
Select the required Menu,Audio and Subtitle language.  
Audio language and Subtitle language can also be adapted  
using the Menu bar.  
11  
PREPARATION  
 
Operation  
Loading Discs  
General Features  
Note:  
1 Press OPEN/CLOSE on the front of the player to open the  
disc tray.  
– Unless stated, all operations described are based on remote  
control use. Some operations can be carried out using the  
menu bar on the screen.  
2 Load your chosen disc in the tray, label side up.  
3 Press OPEN/CLOSE again to close the tray.  
READ appears in the status window and on the player  
display, and playback starts automatically.  
Moving to another title/  
chapter  
Note:  
– If ‘Child Lock’ is set to ON and the disc inserted is not  
authorized, the 4-digit code must be entered and/or the disc  
must be authorized (see ‘Access Control’).  
When a disc has more than one title or  
chapter, you can move to another title/chapter as follows:  
Press SYSTEM MENU, then select or in the menu  
bar.  
Press 3or 4to select a title/chapter.  
Playing a DVD-Video and  
Video CD  
Slow Motion  
Select (SLOW MOTION) in the menu bar.  
Use the 4keys to enter the SLOW MOTION menu.  
The player will now go into PAUSE mode.  
Use the cursor keys 12to select the required speed: -1,  
-1/2, -1/4 or -1/8 (backward), or +1/8, +1/4, +1/2 or +1  
(forward).  
Select 1 to play the disc at normal speed again.  
If ;is pressed, the speed will be set to zero (PAUSE).  
To exit slow motion mode, press Bor 3.  
Playing a disc  
After inserting the disc and closing the  
tray, playback starts automatically.The  
status window of the player display shows  
the type of disc loaded, as well as the disc’s  
information and playing time.  
The disc may invite you to select an item from  
a menu. If the selections are numbered, press  
the appropriate numerical key; if not, use the  
4312keys to highlight your selection, then press OK.  
The number of the current title and chapter are displayed.  
Playback may stop at the end of theTitle and you may  
return to the DVD disc menu.To go to the next title, press  
B.  
Still Picture and Frame-by-frame playback  
Select (STEP) in the menu bar.  
Use the 4key to enter the picture by  
picture menu.  
The player will now go into PAUSE  
mode.  
To stop playback, press 9.  
The default screen will appear, giving information about  
the current status.  
You can resume playback from the point at which you  
stopped playback. Press B; when you see the Resume icon  
.on the screen, press Bagain.  
The RESUME feature applies not only to the disc in the  
player, but also to the last four discs you have played. Simply  
reload the disc and press RESUME on the remote control  
or, press Bwhen you see the Resume icon .on the  
screen, then press Bagain.  
Use the cursor keys 12to select the previous or next  
picture frame.  
To exit STEP mode, press Bor 3.  
You can also step forward by pressing ;repeatedly on the  
remote control.  
Scan  
Scanning plays the first 10 seconds of each  
chapter/index on the disc.  
Press SCAN.  
Note:  
To continue playback at your chosen track, press SCAN  
again or press B.  
– DVDs may have a region code.Your player will not play  
discs that have a region code different from the region code of  
your player.  
12  
OPERATION  
 
Search  
Time search  
TheTime Search function allows you to start playing at any  
chosen time on the disc.  
Select (TIME SEARCH) in the menu bar.  
Press 4.  
The player will now go into PAUSE mode.  
A time edit box appears on the screen, showing the  
elapsed playing time of the current disc.  
Use the digit keys to enter the required start time. Enter  
hours, minutes and seconds from left to right in the box.  
Each time an item has been entered, the next item will  
be highlighted.  
Select (FAST MOTION) in the menu  
bar.  
Use the 4keys to enter the FAST  
MOTION menu.  
Use the 12keys to select the required speed: -32, -8 or -4  
(backward), or +4, +8, +32 (forward).  
Select 1 to play the disc at normal speed again.  
To exit FAST MOTION mode, press Bor 3.  
To search forward or backward through different speeds,  
you can also hold down Sor T.  
Press OK to confirm the start time.  
The time edit box will disappear and playback starts  
from the selected time on the disc.  
Repeat  
DVD-Video Discs - Repeat chapter/  
title/disc  
To repeat the currently playing chapter,  
press REPEAT.  
REPEAT CHPT appears on the player display.  
To repeat the title currently playing , press REPEAT a  
second time  
REPEAT TITL appears on the display.  
To repeat the entire disc, press REPEAT a third time  
REPEAT appears on the display.  
To exit Repeat mode, press REPEAT a fourth time.  
Zoom  
The Zoom function allows you to enlarge the video image  
and to pan through the enlarged image.  
Select (ZOOM).  
Press 3/4to activate the ZOOM function and select the  
required zoom factor: 1.33 or 2 or 4.  
The player will go into Pause mode.  
The selected zoom factor appears below the Zoom icon  
in the menu bar, and ‘Press OK to pan’ appears below the  
menu bar.  
Video CDs - Repeat track/disc  
To repeat the track currently playing , press REPEAT.  
REPEAT TRK appears on the player display.  
To repeat the entire disc, press REPEAT a second time.  
REPEAT appears on the display and the screen.  
To exit Repeat mode, press REPEAT a third time.  
The picture will change accordingly.  
Press OK to confirm the selection.  
Repeat A-B  
The panning icons appear on the screen.  
Use the 1234keys to pan across the screen.  
When OK is pressed only the zoomed picture will be  
shown on the screen.  
To exit ZOOM mode:  
– Press B to resume playback.  
To repeat a sequence in a title:  
Press REPEAT A-B at your chosen starting  
point.  
A- appears briefly on the screen.  
Press REPEAT A-B again at your chosen end point.  
REPEAT A-B appears briefly on the display, and the repeat  
sequence begins.(REPEAT A-B is displayed on the front panel  
of the player)  
To exit the sequence, press REPEAT A-B.  
Shuffle  
DVD-Video discs  
This shuffles the playing order of chapters  
within a title, if the title has more than one chapter.  
Press SHUFFLE during playback.  
SHUFFLE appears on the screen for about two  
seconds.  
To return to normal playback, press SHUFFLE again.  
Video CDs  
Press SHUFFLE during playback.  
SHUFFLE appears on the screen for about two  
seconds.  
To return to normal playback, press SHUFFLE again.  
13  
OPERATION  
 
FTS-Video  
Special DVD Features  
The FTS-Video function allows you to store your favorite  
titles and chapters (DVD) and favorite tracks and indexes  
(VCD) for a particular disc in the player memory.  
FTS program can contain 20 items (titles, chapters).  
An programmed FTS will be placed on top of the list when  
playback is activated.When the list is full, a new program  
will replace the last program on the list.  
Checking the contents of DVD-Video discs:  
Menus  
DVDs may contain menus to navigate the disc and access  
special features.To use the menu, press the appropriate  
numerical key or use the 4, 3, 2, 1keys to highlight your  
selection, then press OK.  
The program can be selected and played at any time.  
Title/Disc menu  
Storing an FTS-Video Program  
While playback is stopped, select VIDEO FTS c in the  
menu bar.  
Press 4to open the menu.  
The VIDEO FTS menu appears.  
Press 2or 1or FTS to select ON or OFF.  
Press DISC MENU.  
If the current title has a menu, the menu will appear on  
the screen. Otherwise, the disc menu will be displayed.  
The menu can list camera angles, spoken language and  
subtitle options, and chapters for the title.  
To remove the title menu, press DISC MENU again.  
Storing titles/tracks  
Press 4to select TITLES.  
Camera Angle  
Use 2and 1to select the required title.  
Press OK if you wish to store the entire title.  
The title number will be added to the list of selections.  
If the disc contains sequences recorded from different  
camera angles, the angle icon appears, showing the number  
of available angles and the angle being shown currently.You  
can then change the camera angle if you wish.  
Use the 3/4keys to select the required angle icon.  
After a while, playback changes to the selected angle.The  
angle icon remains displayed until multiple angles are no  
longer available.  
Storing chapters/indexes  
Changing the audio language  
Press 4on the selected title number.  
The title number will be marked and the highlight moves  
to the first available chapter number for this title.  
Use 2and 1to select the required chapter number.  
Press OK to confirm the selection.  
Select Y (AUDIO) in the menu bar.  
Press Y or 3/4repeatedly to see the different languages.  
The title/chapter selection will be added to the list of  
selections.  
Press SYSTEM MENU to exit the VIDEO FTS c menu.  
Erasing an FTS-Video Program  
Subtitles  
While playback is stopped, select VIDEO FTS c in the  
menu bar.  
Use 4to select PROGRAM.  
Use 2and 1to select the required number.  
Press OK to erase the selection.  
Press SYSTEM MENU to exit.  
Select Z (SUBTITLE) in the menu bar.  
Press Z or 3/4repeatedly to see the different subtitles.  
Erasing all selections  
While playback is stopped, select VIDEO FTS c in the  
menu bar.  
Use 4to select CLEAR ALL.  
Press OK.  
All selections will be erased.  
Press SYSTEM MENU to exit.  
14  
OPERATION  
 
Pause  
Special Video CD & SVCD  
Features  
Press ;during playback.  
To return to playback, press B.  
Playback Control (PBC)  
Search  
Load aVideo CD with PBC and press B.  
To search forward or backward through  
the disc at four times normal speed, hold  
down Sor Tfor about one second  
during playback.  
Search begins, and sound is partially muted.  
To step up to eight times the normal speed, press Sor  
Tagain.  
Go through the menu with the keys indicated on theTV  
screen until your chosen passage starts to play. If a PBC  
menu consists of a list of titles, you can select a title directly.  
Enter your choice with the numerical keys (0-9).  
Press RETURN to go back to the previous menu.  
You may also set to PBC OFF under Personal  
Preferences.  
Search goes to eight times the speed, and the sound is  
muted.  
To return to four times the normal speed, press Sor  
Tagain.  
If theTV is on, search speed and direction are indicated on  
the screen each time Sor Tis pressed.  
To end the search, press Bto resume playback or press 9  
to stop playback.  
Playing an Audio CD  
After loading the disc, playback starts automatically.  
If theTV is on, the Audio CD screen appears.  
The number of tracks and the total playing time of the disc  
will be shown on the screen.  
During playback, the current track number and its elapsed  
playing time will be shown on the screen and on the player  
display.  
Moving to another track  
Press Sor Tbriefly during playback to go to the  
next track or to return to the beginning of the current  
track.  
Playback will stop at the end of the disc.  
To stop playback at any other time, press 9.  
Press Stwice briefly to step back to the previous track.  
To go directly to any track, enter the track number using  
the numerical keys (0-9).  
Shuffle  
Press SHUFFLE during playback.  
The order of the tracks is changed.  
To return to normal playback, press  
SHUFFLE again.  
15  
OPERATION  
 
Repeat track/disc  
Favorite Track Selection (FTS)  
Program  
To repeat the track currently playing, press  
REPEAT.  
The FTS Program allows you to store your favorite tracks  
for a particular disc in the player memory.  
Each FTS Program can contain 20 tracks.  
REPEAT TRK appears on the display.  
To repeat the entire disc, press REPEAT a second time.  
REPEAT appears on the display.  
To exit Repeat mode, press REPEAT a third time.  
Repeat A-B  
To repeat a sequence:  
Press REPEAT A-B at your chosen starting  
point.  
A- appears on the player display.  
Press REPEAT A-B again at your chosen end point.  
A-B appears on the display, and the sequence begins to  
play repeatedly.  
To exit the sequence, press REPEAT A-B again.  
Storing an FTS Program  
Scan  
Scanning plays the first 10 seconds of each  
track on the disc.  
Press SCAN.  
To continue playback at your chosen track, press SCAN  
again or press B.  
1 Load a disc and stop playback.  
2 Use 4to go to the list of available tracks.  
3 Use 2or 1to select tracks from the list.  
To go directly to any track, enter the track number using  
the numerical keys (0-9).  
4 Store each track by pressing OK.  
The track numbers will be added to the list.  
The number of tracks and the playing time of the  
program will be shown on the screen and the player display.  
When your FTS Program is complete, press Bto start  
playback or, press 3to go back to Stop mode. In either  
case, the FTS Program will be automatically memorized.  
Switching FTS ON/OFF  
1 Use 34to move to select desired tracks.  
2 Use 2or 1to select either ON or OFF.  
Erasing a track from an FTS Program  
1 Use 4to go to the list of selected tracks.  
2 Use 2and 1to select the track number you wish to erase.  
3 Press OK.  
The track number will be erased from the list of selected  
tracks.  
Erasing the complete program  
1 Use 4to select CLEAR ALL, then press OK.  
The complete FTS Program for the disc will be erased.  
16  
OPERATION  
 
Access Control  
Access Control: Child Lock  
(DVD-Video and Video CD)  
Activating/deactivating the Child Lock  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the 3/4keys.  
2 Enter a 4-digit code of your own choice.  
3 Enter the code a second time.  
4 Move to “CHILD LOCK” using the 3/4keys.  
5 Move to LOCK/UNLOCK using the 2key.  
6 Select LOCK using the 3/4keys.  
7 Press OK or 1to confirm, then press 1again to exit the  
menu.  
Now unauthorized discs will not be played unless the  
4-digit code is entered.  
Deauthorizing discs  
8 Select UNLOCK to deactivate the CHILD LOCK.  
Insert the disc. See ‘Loading disc’.  
Playback starts automatically.  
Press 9while { is visible.  
The | will appear and the disc is now deauthorized.  
Note: Confirmation of the 4-digit code is necessary when:  
– The code is entered for the very first time (see above),  
– The code is changed (see ‘Changing the 4-digit code’),  
– The code is cancelled (see ‘Changing the 4-digit code’).  
Access Control: Parental  
Control (DVD-Video only)  
Movies on DVDs may contain scenes not suitable for  
children.Therefore, discs may contain ‘Parental Control’  
information which applies to the complete disc or to  
certain scenes on the disc.These scenes are rated from 1  
to 8, and alternative, more suitable scenes are available on  
the disc. Ratings are country dependent.The ‘Parental  
Control’ feature allows you to prevent discs from being  
played by your children or to have certain discs played with  
alternative scenes.  
Authorizing discs  
Insert the disc. See ‘Loading disc’.  
The ‘child protect’ dialog will appear.  
You will be asked to enter your secret code for ‘Playback  
Once ‘or ‘Playback Always.’ If you select ‘Playback Once’, the  
disc can be played as long as it is in the player and the  
player is ON. If you select ‘Playback Always’, the disc will  
become child safe (authorized) and can always be played,  
even if the Child Lock is set to ON.  
Notes:  
– The player memory maintains a list of 120 authorized  
(‘Child safe’) disc titles.A disc will be placed in the list when  
‘Playback Alwaysis selected in thechild protect’ dialog.  
– Each time a ‘child safe’ disc is played, it will be placed on  
top of the list.When the list is full and a new disc is added, the  
last disc in the list will be removed from the list.  
– Double-sided DVDs may have a different ID for each side.  
In order to make the disc ‘child safe’, each side has to be  
authorized.  
– Multi-volumeVCDs may have a different ID for each  
volume. In order to make the complete set ‘child safe’, each  
volume has to be authorized.  
17  
ACCESS CONTROL  
 
Activating/Deactivating Parental Control  
Changing the 4-digit code  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the 3/4keys.  
2 Enter your 4-digit code. If necessary, enter the code a  
second time.  
3 Move to Parental Control using the 3/4keys.  
4 Move to VALUE ADJUSTMENT (1-8) using the 2key.  
5 Then use the 3/4keys or the numerical keys on the  
remote control to select a rating from 1 to 8 for the disc  
inserted.  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the 3/4keys.  
2 Enter the old code.  
3 Move to CHANGE CODE using the 4key.  
4 Press the 2key.  
5 Enter the new 4-digit code.  
6 Enter the code a second time and reconfirm by pressing  
OK.  
7 Press 1to exit the menu.  
Rating 0 (displayed as ‘– –’):  
Parental Control is not activated.The Disc will be played in  
full.  
If you forget your 4 digit code  
1 Press 9to exit the ‘Child Protect’ screen.  
Ratings 1 to 8:  
2 Select ACCESS CONTROL in the features menu using  
The disc contains scenes not suitable for children. If you set  
a rating for the player, all scenes with the same rating or  
lower will be played. Higher rated scenes will not be played  
unless an alternative is available on the disc.The alternative  
must have the same rating or a lower one. If no suitable  
alternative is found, playback will stop and the 4-digit code  
has to be entered.  
the 3/4keys.  
3 The 4-digit code can be cancelled by pressing 9four times  
in the ‘Access Control’ dialog.  
4 You can then enter a new code (twice!) as described above  
(Changing the 4 digit code).  
Parental Control Disclaimer  
6 Press OK or 1to confirm, then press 1again to exit the  
menu.  
This DVD player features the PARENTAL CONTROL  
system which is intended to activate when playing DVD  
discs furnished with certain software coding.This is  
according to technical standards adopted by the set maker  
and disc content industries.  
Please note that the PARENTAL CONTROL system  
will not operate a DVD disc which is not furnished with the  
appropriate software coding.Also note that at the time of  
release of this DVD player, certain aspects of the technical  
standards had not been settled between set makers and  
the disc industries.  
On this basis, Philips cannot guarantee the functioning of  
the PARENTAL CONTROL system and denies any  
liability associated with unintended watching of disc  
content.  
Country  
1 When disc playback is stopped, select ACCESS  
CONTROL in the features menu using the 3/4keys.  
2 Enter the 4-digit code.  
3 Move to CHANGE COUNTRY using the 4key.  
4 Press the 2key.  
If in doubt, please make sure the disc plays according to  
your PARENTAL CONTROL settings before you allow  
children access to the player.  
5 Select a country using 3/4.  
6 Press OK or 1to confirm, then press 1again to exit the  
menu.  
18  
ACCESS CONTROL  
 
Before Requesting Service  
If it appears that the DVD-Video player is faulty, first consult this checklist. Something may have been overlooked. Under no  
circumstances should you attempt to repair the system yourself; this will invalidate the warranty.  
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).  
Symptom  
Remedy  
No power  
– Make sure the mains cord (AC Power) is properly connected.  
– Check if there is power at the AC outlet by plugging in another appliance.  
No picture  
– Check if theTV is switched on.  
– Check the video connection.  
Distorted picture  
– Check the disc for fingerprints and clean the disc with a soft cloth, wiping  
from the center to the edge in a straight line.  
– Sometimes a small amount of picture distortion may appear .This is not a  
malfunction.  
Completely distorted picture  
or no color with player menu  
– If the picture is distorted completely or if the picture rolls vertically,  
make sure the NTSC/PAL setting at the DVD player matches the video  
signal of your television.  
– If yourTV video signal is NTSC, select the NTSC setting at the DVD player.  
– If your video signal is PAL, select the PAL setting. - See NTSC/PAL SETTINGS.  
Distorted or black/white picture  
with DVD orVideo CD  
– The disc format does not match yourTV’s video signal (PAL/NTSC).  
No sound  
– Check audio connections.  
– If you are using a HiFi amplifier, try another sound source.  
Distorted sound from HiFi  
amplifier  
– Check to make sure that no audio connections are made to the amplifier’s  
phono input.  
No audio at digital output  
– Check the digital connections.  
– Check the settings menu to make sure the digital output is set to ALL or  
PCM.  
– Check if the audio format of the selected audio language matches your  
receiver capabilities.  
Disc cant be played  
– Ensure the disc label is facing up.  
– Clean the disc.  
– Check if the disc is defective by trying another disc.  
– Check to see if the disc is defective, badly scratched or warped (not flat).  
No return to start-up screen when  
disc is removed  
– Reset by switching the player off, then on again.  
– Check to see if the program requires another disc to be loaded.  
The player does not respond to  
the remote control  
– Aim the remote control directly at the sensor on the front of the player.  
– Remove any obstacles between the player and the remote control.  
– Inspect or replace the batteries in the remote control.  
Buttons do not work  
– In order to completely reset the player, unplug the AC cord from the AC  
outlet. (Please ensure that the set is not in Initial Setup mode)  
Player does not respond to some  
operating commands during  
playback  
– Operations may not be permitted by the disc. Refer to the instructions of  
the disc.  
DVD-Video player cannot read  
CDs/DVDs  
– Use a commonly available cleaning CD/DVD to clean the lens before  
sending the DVD-Video player for repair.  
19  
Download from Www.Somanuals.com. All Manuals Search AndBDoEwFnOloaRdE. REQUESTING SERVICE  
Specifications  
PLAYBACK SYSTEM  
DVD-Video  
CONNECTIONS  
Y Output  
Cinch (green)  
Video CD & SVCD  
CD (CD-Recordable and CD-Rewritable)  
DVD+RW  
PB/CB Output  
PR/CR Output  
S-Video Output  
Video Output  
Audio L+R output  
Digital Output  
Cinch (blue)  
Cinch (red)  
Mini DIN, 4 pins  
Cinch (yellow)  
Cinch (white/red)  
1 coaxial  
OPTICAL READOUT SYSTEM  
Lasertype  
Semiconductor AlGaAs  
Numerical Aperture  
0.60 (DVD)  
IEC958 for CDDA / LPCM  
IEC1937 for MPEG1/2, Dolby Digital and DTS  
0.45 (VCD/CD)  
650 nm (DVD)  
780 nm (VCD/CD)  
Wavelength  
CABINET  
Dimensions (w x h x d)  
Weight  
435 x 92 x 320 mm  
Approximately 4 Kg  
DVD DISC FORMAT  
Medium  
Diameter  
Playing time  
(12cm)  
Optical Disc  
12cm (8cm)  
One layer  
Dual layer  
Two side  
GENERAL FUNCTIONALITY  
Stop / Play / Pause  
Fast Forward / Backward  
Time Search  
2.15 h*  
4 h*  
4.30 h*  
Single layer  
Two side  
Step Forward / Backward  
Slow Motion  
8 h*  
Dual layer  
Title / Chapter /Track Select  
Skip Next / Previous  
VIDEO FORMAT  
DA Converter  
Repeat (Chapter /Title / All) or (Track / All)  
A-B Repeat  
10 bits  
Signal handling  
Digital Compression  
Components  
MPEG2 for DVD,  
MPEG1 forVCD  
Shuffle  
Scan  
New enhanced user graphical interface  
Perfect Still with digital multi-tap filter  
Zoom (xl.33, x2. x4) with picture enhancement  
Screen Saver (Dim 75% after 15 minutes)  
3D Sound (TruSurround)  
Virtual Jog Shuttle  
TV STANDARD  
Number of lines  
Playback  
(PAL/50Hz)  
625  
Multistandard  
(NTSC/60Hz)  
525  
(PAL/NTSC)  
DVD  
Audio and video bit rate indicator  
Horizontal Resolution  
Vertical Resolution  
720 pixels  
576 lines  
720 pixels  
480 lines  
DVD FUNCTIONALITY  
Multi-angle Selection  
VCD  
Horizontal Resolution  
Vertical Resolution  
Audio Selection (one out of maximum eight languages)  
Subtitles Selection (one out of maximum 32 languages)  
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Pan Scan)  
Parental Control and Disk Lock  
352 pixels  
288 lines  
352 pixels  
240 lines  
VIDEO PERFORMANCE  
Video output  
Disc Menu support (Title Menu and Access Control)  
Resume (5 discs) after stop / standby  
1Vpp into 75 ohm  
S-Video output  
Y: 1Vpp into 75 ohm  
C: 0.3Vpp into 75 ohm  
Y: 1Vpp into 75 ohm  
PB/CB PR/CR: 0.7Vpp into 75 ohm  
On/Off  
ProgrammingTitles/chapters with FavoriteTrack Selection  
Y PB/CB PR/CR output  
VIDEO CD FUNCTIONALITY  
Playback Control forVCD 2.0 discs  
Disc Lock  
Resume (5 discs) after stop / standby  
ProgrammingTracks with FavoriteTrack Selection  
Black Level Shift  
Video Shift  
Left/Right  
AUDIO FORMAT  
Digital  
MPEG  
Compressed Digital  
AUDIO CD FUNCTIONALITY  
DTS/Dolby Digital  
PCM  
Time Display (Total /Track / RemainingTrackTime)  
Full audio functionality with remote control  
Programming with FavoriteTrack Selection  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
Analog Sound Stereo  
Dolby Pro Logic downmix from Dolby Digital multi-channel sound  
3D Sound (TruSurround) for virtual 5.1 channel sound on 2 speakers  
*
typical playing time for movie with 2 spoken languages and 3 subtitle languages  
AUDIO PERFORMANCE  
Specifications subject to change without prior notice  
DA Converter  
DVD  
24 bits  
fs 96 kHz  
fs 48 kHz  
fs 44.1 kHz  
fs 44.1 kHz  
4 Hz - 44 kHz  
4 Hz - 22 kHz  
4 Hz - 20 kHz  
4 Hz - 20 kHz  
100 dB  
97 dB  
110 dB  
88 dB  
Video CD  
CD  
Signal-Noise (1kHz)  
Dynamic Range (1kHz)  
Crosstalk (1kHz)  
Distortion and Noise (1kHz)  
20  
SPECIFICATIONS  
 

Pelco Security Camera C1458M J User Manual
Philips Pedicure Spa HP 5225 User Manual
Philips Portable CD Player AX2101 05Z User Manual
Philips Portable CD Player AX5023 17 User Manual
Philips Portable DVD Player PD9000 User Manual
Plantronics Headphones MHS123 User Manual
Polar Exercise Bike CS200 User Manual
Polaris Offroad Vehicle WideTrak User Manual
Premier Mounts Indoor Furnishings UNI STB User Manual
PYLE Audio GPS Receiver PLDNV71BTU User Manual