Philips DVD Player PDCC JS JW 0807 User Manual

MCD 289  
Quick Start Guide  
What’s in the Box?  
You should find these items upon opening the box.  
STANDBY-ON  
SLOW  
Remote control with two AAA  
A/V cord (R/W/Y)  
Stand  
batteries  
2
User Manual  
Quick Start Guide  
1
FM wire antenna  
Quick start guide  
User manual  
Power adapter  
(for main set)  
AC power cord  
(for subwoofer)  
 
Setting the clock  
1
In standby mode, press and hold CLOCK on the remote control.  
2
When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote control) to set the  
hours.  
3
Press CLOCK again and the minute digits flash.Then press VOLUME-/+ (VOL+/- on the  
remote) to set the minutes.  
4
Press CLOCK again to confirm the time setting.  
Setting DVD menu options  
IMPORTANT!  
If the progressive scan feature is activated but the connectedTV does not support progressive  
signals or the cables are not connected accordingly, see the user manual for proper progressive  
scan setup or deactivate the progressive scan feature as below:  
1)Turn off yourTV progressive scan mode or turn on to interlaced mode.  
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit  
progressive scan.  
STANDBY-ON  
SLOW  
ANALOG AUDIO SETUP  
DIGITAL AUDIO SETUP  
PICTURE SETTING  
3D  
DIVX (R) VOD  
DISPLAY  
MUTE  
Tip  
See chapters "Preparations" and "System  
Menu Options" in the User Manual for  
detailed descriptions.  
RDS  
 
Playing a disc  
1
e
i
Pr  
Insert a disc into the slot loader.  
S
i
n
d
e
t
Make sure the label side is facing you.  
Make sure you have removed any other disc from the slot loader.  
2
Playback will start automatically. If not pressÉÅ.  
3
To stop playback, press 9.  
Programming and tuning to radio stations  
1
Press SOURCE (TUNER on the remote control) to select tuner source.  
2
Press PROGRAM for more than two seconds to program all available stations in order of waveband.  
3
Press PRESET ¡ / until the desired preset station is displayed.  
Playing a USB mass storage device  
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),  
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to  
work with this Hi-Fi system).  
1
Insert the USB devices USB plug into the socket  
on the set.  
2
IMPORTANT!  
Slide down to  
Press SOURCE once or more to select USB (or USB on the remote control).  
expose some  
buttons and jacks on  
the front panel!  
3
Play the USB’s audio files as you do with the albums/tracks on a CD,  
Tip  
Detailed playback features and additional functions are  
described in the accompany owner's manual.  
PDCC-JS/JW-0807  
 

Phase Technology Speaker SPF 15 User Manual
Philips Cassette Player AQ6691 00 User Manual
Philips Indoor Furnishings 12972ECO User Manual
Pioneer DVD Player DV 05 User Manual
Pioneer Stereo Receiver 00012562810911 User Manual
Planar Computer Accessories M70L User Manual
Planet Technology Network Router VC 204 User Manual
Porter Cable Pressure Washer D25806 025 2 User Manual
Poulan Trimmer 545192169 User Manual
Pride Mobility Wheelchair Sport 2 User Manual