Philips Flat Panel Television LCD FLAT TV User Manual

 
Presentation of the LCDTelevision  
&
Television keys:  
POWER: to switch theTV on or off.  
VOLUME -/+: to adjust sound level.  
MENU: to access or close menus.  
The PROGRAM -/+ keys can be used to select  
an adjustment and theVOLUME -/+ keys to  
make that adjustment.  
PROGRAM -/+ (- P +): to select programmes.  
Rear of set :  
The main connections are made at the bottom  
of the television.  
For more details on connections see page 12.  
EXT 1  
DVI-I In  
é Power socket  
TV aerial socket  
EXT1 socket  
( DVI-I input for connecting a HD (high  
definition)* equipment or computer with DVI  
output.  
§ Side connections  
* Depending on version.  
Remote control  
Pull out the plastic insulation sheet from the  
battery, this will activate the remote control.  
The battery supplied with the appliance does  
not contain mercury or nickel cadmium so as to  
protect the environment. Please do not discard  
your used batteries, but use the recycling  
methods available (consult your distributor).  
CR 2025  
2
 
Remote Control Keys for LCDTV Functions  
1) . (STANDBY)  
To set theTV to standby mode.To switch theTV set on  
again, press P –/+, 0 to 9 or AV keys.  
1)  
2) Sleeptimer  
2)  
To select the length of time before the set automatically  
3)  
4)  
5)  
switches to standby (from 0 to 240 minutes)  
3) AV  
To display Source List to select TV or peripheral  
equipment connected to EXT1, AV/S-VHS, PC or  
HD (p. 12).  
6)  
7)  
8)  
4) ÓŸÅ Teletext keys (p. 9)  
5) Unused key.  
6) MENU  
To call up or exit theTV menus.  
7) Screen Format (p. 8)  
8) Cursor (<>≤≥)  
9)  
These 4 keys are used to move around the menus.  
9) Volume  
10)  
To adjust the sound level.  
10) ª m Smart picture and sound  
Used to access a series of predefined picture and sound  
settings.  
The personal position relates to settings selected from the  
menus.  
11)  
11) Ë Screen information  
To display / remove the programme number, the time,  
the sound mode and the time remaining on the timer.  
Hold down for 5 seconds to permanently display the  
programme number on the screen.  
3
 
Remote Control Keys for LCDTV Functions  
12) ı List of programmes  
To display / clear the list of programmes. Use the keys  
<> to select a programme and the key to  
display it.  
(12  
(13  
13) ù Sound mode  
Used to force programmes in Stereo and Nicam Stereo  
to Mono or, for bilingual programmes, to choose  
between Dual I or Dual II.  
The Mono indication is red when in forced position.  
(14  
(15  
14) Q Surround Sound  
To activate / deactivate the surround sound effect. In  
stereo, this gives the impression that the speakers are  
further apart. For models equipped withVirtual Dolby  
Surround*, you can experience Dolby Surround Pro  
Logic sound effects.  
15) ¤ Teletext (p. 9)  
(16  
(17  
16) [ Mute  
To mute or restore the sound.  
17) P -/+ SelectingTV programmes  
To move up or down a programme. The number and the  
sound mode are displayed for a few seconds.  
For someTV programmes the title of the programme  
appears at the bottom of the screen.  
(18  
(19  
18) 0/9 Numerical keys  
For direct access to programmes. For a 2 digit  
nd  
programme number, the 2 digit must be entered  
before the dash disappears.  
19) Á Previous programme  
To access the previously viewed programme.  
* Manufactured under license from Dolby Laboratories.“Dolby”  
and the double-D symbols are trademarks of Dolby  
Laboratories.  
4
 
Installing your television set  
& Positioning the television set  
Place yourTV on a solid stable surface.To avoid  
danger do not expose theTV to water, or a heat  
source (e.g. lamp, candle, radiator). Do not  
obstruct the ventilation grid at the rear.  
é
Connecting the aerials  
• Insert the aerial plug into the : socket at the  
rear of the set.  
• Connect the power lead to the television and the  
mains plug into the wall socket (220-240V/50 Hz).  
For connecting other appliances see page p.12.  
Switching on  
To switch on the set, press the POWER key.A  
green indicator comes on and the screen lights  
up. Go straight to the Quick Installation chapter.  
If theTV remains in standby mode(red indicator),  
press the P -/+ key on the remote control.  
The indicator will flash when you use the remote control.  
Quick installation  
When you turn on theTV set for the first time,  
a menu is displayed on screen.This menu  
prompts you to select the country and language  
for the menus:  
The search starts automatically.All the available  
TV programmes will be stored. This operation  
takes a few minutes.The display shows the  
progress of the search and the number of  
programs found.At the end of the search, the  
menu disappears.  
Plug’n’Play  
To exit or interrupt the search, press MENU. If no  
programme is found, consult the possible solutions p. 14.  
If the transmitter or cable network sends the  
automatic sort signal, the programs will be  
numbered correctly. In this case, the installation  
is complete.  
( If this is not the case, you need to use the Sort  
menu to number the programs correctly.  
Some transmitters or cable networks broadcast their  
own sort parameters (region, language, etc.). In this  
case, indicate your choice using the <> keys and  
validate with .  
Country  
GB  
Language  
English  
Í
Æ
Í
Æ
If the menu is not displayed, press the MENU key  
to display the menu.  
& Use the <> keys on the remote control to  
select your country and confirm with .  
If your country does not appear in the list, select  
choice “. . .”  
é Next select your language using the <> keys  
and confirm with .  
5
 
Program sort  
& Press the MENU key.The TV Menu is  
é With the cursor, select the Install menu  
followed by the Sort menu.  
displayed on the screen.  
Select the programme you want to move using  
the <> keys and press .  
Then use the <> keys to select the new  
number and validate with .  
( Repeat steps and for each program you  
wish to renumber.  
§ To quit the menus, press Ë.  
TV Menu  
Install  
Picture  
Sound  
Features  
Install  
0
1
2
3
4
5
Language Æ  
Country Æ  
Auto Store Æ  
Manual Store Æ  
Sort Æ  
Name Æ  
Manual store  
This menu is used to store the programmes  
* Except for France (LL’ standard), you must select  
choice France.  
one at a time.  
Search: press .The search starts. Once a  
programme is found, the scanning stops and its  
name is displayed (when available). Go to the  
next step. If you know the frequency of the  
required programme, this can be entered  
directly using the 0 to 9 keys.  
If no picture is found, consult the possible solutions (p. 14).  
( Program No.: enter the required number  
with the ≤≥ or 0 to 9 keys.  
& Press the MENU key.  
é With the cursor, select the Install menu then  
Manual store:  
TV Menu  
Manual Store  
Picture  
Sound  
Features  
Install  
System  
Search  
Í
Europe  
Æ
Program No.  
Fine Tune  
Store  
§ FineTune: if the reception is not satisfactory,  
adjust using the ≤≥ keys.  
è Store: press .The program is stored.  
! Repeat steps to è for each programme to  
store.  
System: select Europe (automatic detection*)  
or Western Europe (BG standard), Eastern  
Europe (DK standard), United Kingdom  
(I standard) or France (LL’ standard).  
ç To quit the menus, press Ë.  
Other settings in the Install menu  
Some transmitters or cable networks broadcast  
& Press the MENU key and select the Install  
menu:  
é Language: to change the display language for  
the menus.  
Country: to select your country (GB for  
Great Britain).  
their own sort parameters (region, language, etc.). In  
this case, indicate your choice using the <> keys  
and validate with .To quit or interrupt the search,  
press MENU. If no picture is found, consult the  
possible solutions (p. 14).  
( Name: If required, you can give a name to the  
programmes and external connectors. Use the  
≤≥ keys to move around the name display area  
(5 characters) and the <> keys to select the  
characters.When the name has been entered,  
This setting is used for the search, automatic  
programme sort and teletext display. If your country  
does not appear in the list, select “. . .”  
Auto Store: to start automatic search for all  
programmes available in your region. If the  
transmitter or cable network sends the  
automatic sort signal, the programmes will be  
numbered correctly. If this is not the case, you  
need to use the Sort menu to renumber the  
programmes.  
use the  
key to exit.The name is stored.  
Note: on installation, the programs are named  
automatically when an identification signal is sent.  
§ To quit the menus, press Ë.  
6
 
Picture settings  
& Press MENU then .The Picture menu is  
Store and press to store them. Press Ë  
to exit.  
displayed:  
Description of the adjustments:  
• Brightness: this changes picture brilliance.  
• Colour: this changes the intensity of the colour.  
• Contrast: this changes the difference  
between the light and dark tones.  
TV Menu  
Picture  
Picture  
Brightness  
Colour  
Contrast  
Sharpness  
Colour Temp.  
Store  
39  
Sound  
Features  
Install  
Sharpness: this changes the picture definition.  
• ColourTemp.: this changes the colour  
rendering: Cold (bluer), Normal (balanced)  
or Warm (redder).  
• Store: to store the picture adjustments and  
settings.  
é Use the <> keys to select a setting and the  
≤≥ keys to adjust.  
Once the adjustments have been made, select  
Sound adjustments  
Description of the settings:  
& Press MENU, select Sound (>) and press .  
Equalizer: to adjust the sound tone (from  
bass: 100 Hz to treble: 8000 Hz).  
The Sound menu is displayed:  
Balance: this balances the sound on the left  
and right speakers.  
TV Menu  
Sound  
Picture  
Sound  
Features  
Install  
100 Hz  
300 Hz  
1000 Hz  
3000 Hz  
8000 Hz  
Equalizer Æ  
Balance Æ  
DeltaVolume: this is used to compensate  
any volume discrepancies between the  
different programs or EXT sockets.This  
setting is available for programs 0 to 40 and  
the EXT sockets.  
Delta Volume Æ  
AVL Æ  
Dolby Virtual Æ  
Store Æ  
AVL (AutomaticVolume Leveller): this is  
used to limit increases in sound, especially on  
program change or advertising slots.  
DolbyVirtual:To activate / deactivate the  
surround sound effect.You can also access  
these settings with key Q.  
é Use the <> keys to select a setting and the  
≤≥ keys to adjust.  
Once the adjustments have been made, select  
Store and press to store these changes.  
To quit the menus, press Ë.  
Store: this is used to store the sound settings.  
Feature settings  
Sleep : to select an automatic standby period.  
To quit the menus, press Ë.  
& Press MENU, select Features (>) and  
press .You can adjust:  
é Contrast +: automatic adjustment of the  
picture contrast which permanently sets the  
darkest part of the picture to black.  
7
 
Screen Formats  
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format  
(conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen  
(letterbox format).This function allows you to optimise the picture display on screen.  
If your television is equipped with a 4:3 screen.  
Press the key (or <>) to select the different modes:  
4:3  
The picture is reproduced in 4:3 format.  
Expand 4:3  
The picture is enlarged vertically.This mode is used to cancell the black bands when  
watching a programme in letterbox format.  
Compress 16:9  
The picture is compressed vertically into 16:9 format.  
If your television is equipped with a 16:9 screen.  
Press the key (or ≤≥) to select the different modes:  
ThisTV set is also equipped with automatic switching which will select the correct-screen  
format, provided the specific signals are transmitted with the programmes.  
4:3  
The picture is reproduced in 4:3 format and a black band is displayed on either side  
of the picture.  
Zoom 14:9  
The picture is enlarged to 14:9 format, a thin black band remains on both sides of  
the picture.  
Zoom 16:9  
The picture is enlarged to 16:9 format.This mode is recommended when displaying  
pictures which have black bands at the top and bottom (letterbox format).  
Subtitle Zoom  
This mode is used to display 4:3 pictures using the full surface of the screen leaving  
the sub-titles visible.  
SuperWide  
This mode is used to display 4:3 pictures using the full surface of the screen by  
enlarging the sides of the picture.  
Widescreen  
This mode restores the correct proportions of images transmitted in 16:9.  
Note: If you display a 4:3 picture in this mode, it will be enlarged horizontally.  
8
 
Teletext  
Teletext is an information system broadcast by certain channels which can be consulted like a  
newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar  
with the transmission language (cable networks, satellite channels, etc.).  
Press :  
You will obtain :  
Teletext call This is used to call or exit teletext mode.The summary  
appears with a list of items that can be accessed. Each  
item has a corresponding  
3 digit page number.  
If the channel selected does not broadcast teletext, the  
indication 100 will be displayed and the screen will remain  
blank (in this case, exit teletext and select another channel).  
Selecting a  
page  
Enter the number of the page required using the 0 to 9  
or P -/+ keys. Example: page 120, enter 120.  
The number is displayed top left, the counter turns and  
then the page is displayed. Repeat this operation to view  
another page.  
If the counter continues to search, this means that the page is  
not transmitted. Select another number.  
Coloured areas are displayed at the bottom of the screen.  
The 4 coloured keys are used to access the items or  
corresponding pages.  
Direct access  
to the items  
The coloured areas flash when the item or the page is not yet  
available.  
Contents This returns you to the contents page (usually page 100).  
Certain pages contain sub-pages which are automatically  
displayed successively.This key is used to stop or resume  
sub-page acquisition.The indication _ appears top left.  
Stop  
sub-page  
acquisition  
Double page  
teletext  
To activate or deactivate the double page teletext display  
mode.The active page is displayed on the left and the  
(depending on version)  
following page is displayed on the right. Press  
to hold a page (i.e. the contents page).The active page is then  
if you want  
Ó
displayed on the right.To return to normal mode, press  
Å.  
Hidden  
information  
To display or hide the concealed information (games  
solutions).  
Enlarge a  
page  
This allows you to display the top or bottom part of the  
page and then return to normal size.  
Favourite  
pages  
Instead of the standard coloured areas displayed at the bottom of  
the screen, you can store 4 favourite pages on the first  
40 channels which can then be accessed using the coloured keys  
(red, green, yellow, blue). Once set, these favourite pages will  
become the default every time teletext is selected.  
& Press the MENU key to change to favourite pages mode.  
é Display the teletext page that you want to store.  
Press the coloured key of your choice for 3 seconds.The  
page is now stored.  
Repeat the operation with the other coloured keys.  
( Now when you consult teletext, your favourite pages will  
appear in colour at the bottom of the screen.To  
temporarily retrieve the standard items, press MENU.  
To clear everything, and return the standard items as the  
default, press Ë for 5 seconds.  
9
 
Using in PC monitor mode  
NOTE  
– When using the LCDTV as a PC monitor, slight diagonal interference lines may be observed when it is  
operated under electromagnetic interference environment but will not affect the performance of this product.  
– For better performance, good quality DVI cable with good noise isolation filter is recommended.  
PC Mode  
YourTV can be used as a computer monitor.  
• Picture:  
- Brightness / Contrast : to adjust the  
brightness and contrast.  
- Horizontal / Vertical: to adjust the horizontal  
and vertical placing of the image.  
You must first of all connect the computer and  
adjust the resolution (see p.13).  
Choosing PC mode  
- Colour Temp: to adjust the colours (cold,  
normal or warm).  
& Press the AV key on the remote control to  
display the Source List.  
• Audio Selection: to choose the sound  
reproduced on theTV (PC/HD orTV).  
• Features (only available on certain versions):  
- Phase/Clock: eliminates the horizontal  
(Phase) and vertical (Clock) interfering lines.  
- Format : to choose between full screen or  
native format of the PC screens.  
- Auto Adjust: position is set automatically.  
• ResetTo Factory Setting: to return to the  
factory settings (default settings).  
é Use the cursor </> key to select PC and  
then press the cursor key to switch theTV  
to PC mode (DVI-I In).  
To return toTV mode, press the AV key, select  
TV and validate with key.  
Using the PC menus  
Press the MENU key to access the specific  
settings of the PC monitor mode. Use the  
cursor to adjust them (the settings are  
automatically saved):  
Here is the list of the different PC display resolutions available on yourTV:  
15"/39cm  
XGA  
20"/51cm  
VGA  
20"/51cm  
WXGA  
23"/58cm  
WXGA  
640 x 350  
640 x 480  
800 x 600  
832 x 624  
1024 x 768  
1280 x 768  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10  
 
Using in HD (High Definition) Mode  
(Only available on certain versions)  
• ColourTemp.: this changes the colour  
rendering: Cold (bluer), Normal (balanced)  
or Warm (redder).  
• Store: to store the picture adjustments and  
settings.  
HD Mode  
The HD (High Definition) mode allows you to  
enjoy clearer and sharper pictures through the  
DVI-I inputs if you are using a HD  
receiver/ equipment that can transmit high  
definition programming.  
You must first of all connect the HD equipment  
(see p.13).  
Sound:  
Equalizer: to adjust the sound tone (from  
bass: 100 Hz to treble: 8000 Hz).  
Balance: this balances the sound on the left  
and right speakers.  
Choosing HD mode  
& Press the AV key on the remote control to  
display the Source List.  
DeltaVolume: this is used to compensate  
any volume discrepancies between the  
different programs or EXT sockets.This  
setting is available for programs 0 to 40 and  
the EXT sockets.  
é Use the cursor </> key to select HD and  
then press the cursor key to switch theTV  
to HD mode.  
To return toTV mode, press the AV key, select  
TV and validate with key.  
AVL (AutomaticVolume Leveller): this is  
used to limit increases in sound, especially on  
program change or advertising slots.  
DolbyVirtual:To activate / deactivate the  
surround sound effect.You can also access  
these settings with key Q.  
Using the HD menus  
Press the MENU key to access the specific  
settings of the HD mode. Use the cursor to  
adjust them (the settings are automatically  
saved):  
Store: this is used to store the sound  
settings.  
Picture:  
• Brightness: this changes picture brilliance.  
• Colour: this changes the intensity of the  
colour.  
• Contrast: this changes the difference  
between the light and dark tones.  
Features:  
Sleep : to select an automatic standby  
period.  
Horizontal Shift: to adjust the horizontal  
placing of the image.  
Sharpness (only available for certain signal  
only): this changes the picture definition.  
Here is the list of the different HD display resolutions available on yourTV:  
15"/39cm  
XGA  
20"/51cm  
VGA  
20"/51cm  
WXGA  
23"/58cm  
WXGA  
Analogue Digital  
Analogue Digital  
Analogue Digital  
Analogue Digital  
SDTV 480 i  
SDTV 576 i  
EDTV 480 p  
EDTV 576p  
HDTV 720p  
HDTV 1080 i  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
11  
 
Connecting peripheral equipment  
The television has 1 external socket situated at the back of the set (EXT1) and sockets on the side.  
Press the AV key on the remote control to display Source List and select TV or peripheral  
equipment connected to EXT1, AV/SVHS, PC or HD.  
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.  
The side connections has audio inputs, CVBS/S-VHS inputs, headphone out.  
EXT 1  
DVI-I In  
Headphone  
Audio In  
Video In  
S-Video  
DVI Audio In  
Video recorder  
Carry out the connections shown opposite, using a good quality  
euroconnector cable.  
EXT 1  
DVI-I In  
If your video recorder does not have a euroconnector socket, the only  
connection possible is via the aerial cable.You will therefore need to  
tune in your video recorder's test signal and assign it programme  
number 0 (refer to manual store, p. 6).  
To reproduce the video recorder picture, press 0 key.  
Video recorder with decoder  
Connect the decoder to the second euroconnector socket of  
the video recorder.You will then be able to record scrambled  
transmissions.  
Other equipment  
EXT 1  
DVI-I In  
Satellite receiver, decoder, CDV, games, etc.  
Carry out the connections shown opposite.  
12  
 
Side connections  
Make the connections as shown opposite.  
With the AV key, select AV/S-VHS.  
For a mono set, connect the sound signal to the AUDIO L (or AUDIO R)  
input.The sound automatically comes out of the left and right speakers  
of the set.  
Headphones  
When headphones are connected, the sound on theTV set will be  
cut.The VOLUME -/+ keys are used to adjust the volume level.  
The headphone impedance must be between 32 and 600 Ohms.  
HD equipment  
HD Analogue Connection (DVI-I)  
EXT  
1
DVI-I In  
Make the connections as shown opposite.  
With the AV key, select HD.  
For more information on using HD mode see page 11.  
HD Digital Connection (DVI-I)  
EXT  
1
DVI-I In  
Computer  
PC with DVI  
EXT 1  
DVI-I In  
Connect the monitor output (DVI) of your computer to the  
DVI-I In of the LCDTV. Connect the sound output Audio out of  
the computer to the input DVI Audio in of the LCDTV.  
PC withVGA  
Connect the monitor output (VGA) of your computer via a  
VGA/DVI-I cable* to the DVI-I In of theTV. Connect the sound  
output Audio out of the computer to the input DVI Audio in of  
the LCDTV.  
* Not supplied with the set.  
For more information on using PC mode see page 10.  
EXT 1  
DVI-I In  
Configure the computer on 1024 x 768, 60 Hz for  
optimum resolution.  
13  
 
Tips  
Poor reception  
The proximity of mountains or high buildings may be responsible for ghost  
pictures, echoing or shadows. In this case, try manually adjusting your picture: see  
FineTune (p. 6) or modify the orientation of the outside aerial. If you are using an  
indoor aerial, reception may be difficult in certain conditions.You can improve  
reception by rotating the aerial. If the reception remains poor, you will need to  
use an external aerial  
No picture  
No sound  
Have you connected the aerial socket properly? Have you chosen the right  
system? (p. 6). Poorly connected euroconnector cables or aerial sockets are often  
the cause of picture or sound problems (sometimes the connectors can become  
half disconnected if theTV set is moved or turned). Check all connections.  
If on certain channels you receive a picture but no sound,this means that you do not have  
the correctTV system.Modify the System setting (p. 6).  
The amplifier connected to theTV does not deliver any sound? Check that you  
have not confused the audio output with the audio input.  
PC mode doesn’t  
work ?  
Check that you have configured the computer on a compatible display resolution  
(see p. 13).  
Snowy picture  
when switched to  
HD-D mode  
Noise is displayed if the connected digital equipment’s (DVD player or set-top  
box) HDCP authentication failed. Check the user manual for the digital  
equipment you are connecting.  
Remote control  
TheTV set does not react to the remote control; the indicator on the set no  
longer flashes when you use the remote control? Replace the battery.  
Standby  
If the set receives no signal for 15 mins, it automatically goes into standby mode.  
To save power, your set is fitted with components that give it a very low power  
consumption when in standby mode (less than 1W).  
Cleaning the set  
Still no results?  
Only use a clean, soft and lint-free cloth to clean the screen and the casing of your  
set. Do not use alcohol-based or solvent-based products.  
Disconnect the mains plug of theTV for 30 seconds then reconnect it.  
If yourTV set breaks down, never attempt to repair it yourself: contact your  
dealer's after-sales service.  
Glossary  
DVI (DigitalVisual Interface):A digital interface  
better picture quality than with standard video  
(VHS and 8 mm) where theY/C signals are  
combined to provide only one video signal.  
NICAM sound: Process by which digital sound  
can be transmitted.  
standard created by the Digital Display  
Working Group (DDWG) to convert analog  
signals into digital signals to accommodate  
both analog and digital monitors.  
HDCP (High-bandwidth Digital-Content  
Protection): developed by Intel to provide  
secure copy protection of content transmitted  
digitally from the source (such as DVD player  
or set-top box) to theTV display.  
System:Television pictures are not broadcast in  
the same way in all countries.There are  
different standards: BG, DK, I, and L L’.The  
System setting (p. 6) is used to select these  
different standards.This is not to be confused  
with PAL or SECAM colour coding. Pal is used  
in most countries in Europe, Secam in France,  
Russia and most African countries.The United  
States and Japan use a different system called  
NTSC.The inputs EXT1 and EXT2 are used to  
read NTSC coded recordings.  
VGA (Video Graphics Array): a common standard  
graphics display system for PCs.  
RGB signals :These are the three video signals,  
Red Green Blue, which make up the picture.  
Using these signals improves picture quality.  
S-VHS Signals: These are 2 separateY/C video  
signals from the S-VHS and Hi-8 recording  
standards.The luminance signalsY (black and  
white) and chrominance signals C (colour) are  
recorded separately on the tape.This provides  
16:9: Refers to the ration between the length and  
height of the screen.Wide screen televisions  
have a ration of 16/9, conventional screenTV  
sets have a ration of 4/3.  
14  
 
Table of TV frequencies.  
Frequenztabelle der Fernsehsender.  
Liste des fréquencesTV.  
FrequentietabelTV-Zenders.  
Tabella delle frequenzeTV.  
Lista de frecuenciasTV.  
Lista das frequênciasTV  
Liste overTV senderne.  
Tabell overTV-frekvenser.  
Tabell överTV-frekvenser.  
TV-taajuustaulukko.  
CÔËÒÓÍ ˜‡ÒÚÓÚ ÔÂ‰‡Ú˜ËÍÓ‚.  
A televizió-adóállomások  
frekvenciáinak a listája.  
Lista częstotliwości stacji nadawczych.  
Seznam frekvenčních pásem vysílačů.  
Zoznam frekvenčných pásiem vysielačov.  
K·Ù¿ÏÔÁÔ˜ Û˘¯ÓÔÙ‹ÙˆÓ ÔÌÒÓ.  
FRANCE  
EUROPE  
CANAL ................FREQ (MHz)  
2...........................55.75  
CANAL ................FREQ (MHz)  
E2 ........................48.25  
E3 ........................55.25  
E4 ........................62.25  
E5 ......................175.25  
E6 ......................182.25  
E7 ......................189.25  
E8 ......................196.25  
E9 ......................203.25  
E10 ....................210.25  
E11 ....................217.25  
E12 ....................224.25  
R1 ........................49.75  
R2 ........................59.25  
R3 ........................77.25  
R4 ........................85.25  
R5 ........................93.25  
R6 ......................175.25  
R7 ......................183.25  
R8 ......................191.25  
R9 ......................199.25  
R10 ....................207.25  
R11 ....................215.25  
R12 ....................223.25  
S1 ......................105.25  
S2 ......................112.25  
S3 ......................119.25  
S4 ......................126.25  
S5 ......................133.25  
S6 ......................140.25  
S7 ......................147.25  
S8 ......................154.25  
S9 ......................161.25  
S10 ....................168.25  
S11 ....................231.25  
S12 ....................238.25  
S13 ....................245.25  
S14 ....................252.25  
CANAL ................FREQ (MHz)  
S15 ....................259.25  
CANAL ................FREQ (MHz)  
3...........................60.50  
4...........................63.75  
5...........................176.0  
6...........................184.0  
7...........................192.0  
8...........................200.0  
9...........................208.0  
10.........................216.0  
B ........................116.75  
C ........................128.75  
D ........................140.75  
E ........................159.75  
F.........................164.75  
G........................176.75  
H ........................188.75  
I..........................200.75  
J.........................212.75  
K ........................224.75  
L.........................236.75  
M........................248.75  
N ........................260.75  
O........................272.75  
P ........................284.75  
Q........................296.75  
33.......................567.25  
34.......................575.25  
35.......................583.25  
36.......................591.25  
37.......................599.25  
38.......................607.25  
39.......................615.25  
40.......................623.25  
41.......................631.25  
42.......................639.25  
43.......................647.25  
44.......................655.25  
45.......................663.25  
46.......................671.25  
47.......................679.25  
48.......................687.25  
49.......................695.25  
50.......................703.25  
51.......................711.25  
52.......................719.25  
53.......................727.25  
54.......................735.25  
55.......................743.25  
56.......................751.25  
57.......................759.25  
58.......................767.25  
59.......................775.25  
60.......................783.25  
61.......................791.25  
62.......................799.25  
63.......................807.25  
64.......................815.25  
65.......................823.25  
66.......................831.25  
67.......................839.25  
68.......................839.25  
69.......................855.25  
S16 ....................266.25  
S17 ....................273.25  
S18 ....................280.25  
S19 ....................287.25  
S20 ....................294.25  
H1 ......................303.25  
H2 ......................311.25  
H3 ......................319.25  
H4 ......................327.25  
H5 ......................335.25  
H6 ......................343.25  
H7 ......................351.25  
H8 ......................359.25  
H9 ......................367.25  
H10 ....................375.25  
H11 ....................383.25  
H12 ....................391.25  
H13 ....................399.25  
H14 ....................407.25  
H15 ....................415.25  
H16 ....................423.25  
H17 ....................431.25  
H18 ....................439.25  
H19 ....................447.25  
21.......................471.25  
22.......................479.25  
23.......................487.25  
24.......................495.25  
25.......................503.25  
26.......................511.25  
27.......................519.25  
28.......................527.25  
29.......................535.25  
30.......................543.25  
31.......................551.25  
32.......................559.25  
ITALY  
CANALE..............FREQ (MHz)  
A ..........................53.75  
B ..........................62.25  
C ..........................82.25  
D ........................175.25  
E ........................183.75  
F.........................192.25  
G........................201.25  
H ........................210.25  
H1 ......................217.25  
Information for users in the UK (not applicable outside the UK)  
Positioning theTV  
Important  
This apparatus is fitted with an approved moulded  
For the best results, choose a position where light  
does not fall directly on the screen, and at some  
distance away from radiators or other sources of  
heat. Leave a space of at least 5 cm all around the  
TV for ventilation, making sure that curtains,  
cupboards etc. cannot obstruct the air flow through  
the ventilation apertures.TheTV is intended for use  
in a domestic environment only and should never be  
operated or stored in excessively hot or humid  
atmospheres.  
13AMP plug. Should it become necessary to replace  
the mains fuse, this must be replaced with a fuse of  
the same value as indicated on the plug.  
1. Remove fuse cover and fuse.  
2.The replacement fuse must comply with BS 1362  
and have the ASTA approval mark. If the fuse is  
lost, make contact with your retailer in order to  
verify the correct type.  
3. Refit the fuse cover.  
In order to maintain conformity to the EMC directive,  
the mains plug on this product must not be removed.  
General Points  
Please take note of the section entitled 'Tips' at the  
end of this booklet.  
Connecting the aerial  
The aerial should be connected to the socket marked  
: at the back of the set.An inferior aerial is likely to  
result in a poor, perhaps unstable picture with ghost  
images and lack of contrast. Make-shift loft or set-top  
aerials are often inadequate.Your dealer will know from  
experience the most suitable type for your locality.  
Should you wish to use the set in conjunction with  
other equipment, which connects to the aerial socket  
such asTV games, or a video camera it is recommended  
that these be connected via a combiner unit to avoid  
repeated connection and disconnection of the aerial plug.  
Interference  
The Department ofTrade and Industry operates a  
Radio Interference Investigation Service to helpTV  
licence holders improve reception of BBC and IBA  
programmes where they are being spoilt by  
interference.  
If your dealer cannot help, ask at a main Post Office  
for the booklet "How to ImproveTelevision and  
Radio Reception".  
Mains connection  
Before connecting theTV to the mains, check that the  
mains supply voltage corresponds to the voltage  
printed on the type plate on the rear panel of theTV. If  
the mains voltage is different, consult your dealer.  
Fitting the stand (if provided)  
Use only the stand provided with the set, making  
sure that the fixings are properly tightened.A  
diagram showing how to assemble the stand is  
packed with the stand. Never use a make-shift stand,  
or legs fixed with woodscrews.  
 
Specifications are subject to change without notice.  
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.  
2005 © Koninklijke Philips Electronics N.V. All rights reserved.  
3111 256 19271  
 

PB Heat Boiler MI MIH series User Manual
Philips Cell Phone ID9370B User Manual
Philips Flat Panel Television 14PF7846 User Manual
Philips Washer Dryer PSC805 User Manual
Pioneer Car Stereo System AVH P6850DVD User Manual
Pioneer DVD Recorder DVR X162Q User Manual
Pioneer Speaker SP C22 User Manual
Plantronics Headphones WG100 B User Manual
Precor Home Gym 517i User Manual
Profoon Telecommunicatie Cordless Telephone TX 255 User Manual