Philips MP3 Docking Station DCM230 User Manual

DCM230  
Docking Entertainment System  
Register your product and get support at  
Philips vous remercie de  
Thank you for choosing Philips.  
Gracias por escoger Philips  
votre confiance.  
Need help fast?  
Besoin d'une aide  
rapide?  
Le Guide rapide de début et Manuel de  
l'utilisateur regorgent d'astuces destinées à  
simplifier l'utilisation de votre produit Philips.  
Toutefois, si vous ne parvenez pas à résoudre  
votre probléme, vous pouvez accéder à  
notre aide en ligne à l'adresse  
Necesita ayuda  
inmediata?  
Lea primero la Guía rápida del comienzo  
o el Manual del usuario, en donde encontrará  
consejos que le ayudarán a disfrutar  
plenamente de su producto Philips.  
Si después de leerlo aún necesita ayuda,  
consulte nuestro servicio de  
Read your Quick Start Guide and/or  
User Manual first for quick tips  
that make using your Philips product  
more enjoyable.  
If you have read your instructions  
and still need assistance,  
you may access our online help at  
asistencia en línea en  
or call  
ou formez le  
o llame al teléfono  
1-888-PHILIPS (744-5477)  
while with your product.  
(and Model / Serial number)  
1-800-661-6162 (Francophone)  
1-888-PHILIPS (744-5477) (English speaking)  
Veillez à avoir votre produit à  
portée de main.  
1-888-PHILIPS (744-5477)  
y tenga a mano el producto.  
(y número de model / serial)  
 
1
iPod  
#
^
3
(
$
§
%
@
(
@
¤
)
9
5
!
8
£
&
¡
TIMER  
ª
º
$
#
&
1
3
0
5
0
*8£ 7  
4
2
6
3
 
Return your Product Registration Card or register online at  
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so  
don't miss out. Complete and return your Product Registration Card at once, or register online at  
*Proof of Purchase  
*Product Safety  
Notification  
By registering your product,  
you'll receive notification -  
directly from the manufacturer  
- in the rare case of a product  
recall or safety defect.  
*Additional Benefits  
Returning the enclosed card  
guarantees that your date of  
purchase will be on file, so no  
additional paperwork will be  
required from you to obtain  
warrranty service.  
Registering your product guar-  
antees that you'll receive all of  
the privileges to which you're  
entitled, including special  
money-saving offers.  
Know these  
safetysymbols  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Congratulations on your purchase,  
and welcome to the “family!”  
Dear PHILIPS product owner:  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
Thank you for your confidence in PHILIPS.  
You’ve selected one of the best-built, best-  
backed products available today.We’ll do  
everything in our power to keep you happy  
with your purchase for many years to come.  
As a member of the PHILIPS “family,” you’re  
entitled to protection by one of the most  
comprehensive warranties and outstanding  
service networks in the industry.What’s  
more, your purchase guarantees you’ll  
receive all the information and special offers  
for which you qualify, plus easy access to  
accessories from our convenient home  
shopping network.  
Most importantly, you can count on our  
uncompromising commitment to your total  
satisfaction.  
All of this is our way of saying welcome -  
and thanks for investing in a PHILIPS prod-  
uct.  
This “bolt of lightning” indicates unin-  
sulated material within your unit may  
cause an electrical shock. For the safety of  
everyone in your household, please do not  
remove product covering.  
The “exclamation point” calls attention  
to features for which you should read  
the enclosed literature closely to prevent  
operating and maintenance problems.  
WARNING: To reduce the risk of fire or  
electric shock, this apparatus should not be  
exposed to rain or moisture and objects  
filled with liquids, such as vases, should not  
be placed on this apparatus.  
CAUTION: To prevent electric shock, match  
wide blade of plug to wide slot, fully insert.  
ATTENTION: Pour éviter les choc élec-  
triques, introduire la lame la plus large de la  
fiche dans la borne correspondante de la  
prise et pousser jusqu’au fond.  
P. S. To get the most from your PHILIPS  
purchase, be sure to complete and  
return your Product Registration Card  
at once, or register online at:  
For Customer Use  
Enter below the Serial No. which is located  
on the rear of the cabinet. Retain this  
information for future reference.  
Model No. __________________________  
Serial No. __________________________  
4
 
IMPORTANT SAFETY INSTRUCTIONS  
Clean only with dry cloth.  
Where the MAINS plug or an appliance  
coupler is used as the disconnet device,  
the disconnet device shall remain  
readily operable.  
9
materials  
Class II equipment symbol  
This symbol indicates that the unit has  
a double insulation system  
5
 
Canada  
English:  
This digital apparatus does not exceed  
the Class B limits for radio noise  
emissions from digital apparatus as set  
out in the Radio Interference  
Regulations of the Canadian  
Department of Communications.  
Français:  
Cet appareil numérique n'emet pas de  
bruits radioélectriques dépassant les  
limites applicables aux appareils  
numériques de Class B prescrites dans  
le Règlement sur le Brouillage  
Radioélectrique édicté par le Ministère  
des Communications du Canada.  
Windows Media is a trademark of  
Microsoft Corporation.  
CAUTION  
Use of controls or adjustments or  
performance of procedures other  
than herein may result in hazardous  
radiation exposure or other unsafe  
operation.  
ATTENTION  
L’utilisation des commandes ou  
réglages ou le non respect des  
procédures ci-incluses peuvent se  
traduire par une exposition  
dangereuse à l’irradiation.  
ATENCIÓN  
El uso de mando o ajustes o la  
ejecucción de métodos que no sean  
los aquí descritos puede ocasionar  
peligro de exposición a radiación.  
6
 
Index  
English ------------------------------------------------6  
Français -------------------------------------------- 30  
Español --------------------------------------------- 54  
7
 
Contents  
Timer setting ....................................................... 23  
Activating and deactivating timer ..........................23  
Sleep timer setting ............................................. 24  
General Information  
Environmental Information ................................ 9  
Supplied accessories ............................................ 9  
Safety Information ................................................ 9  
Hearing Safety ..................................................... 10  
iPod Dock  
Compatible iPod players ................................... 25  
Selecting the correct dock adaptor ............... 25  
Setup ..................................................................... 25  
Playing an iPod portable player ....................... 25  
Charging iPod battery using the dock ........... 25  
Preparations  
Rear connections ........................................ .......11  
Connecting a USB device or memory .................12  
card ..............................................................................12  
Connecting other equipment to your .................12  
system .........................................................................12  
Specifications ........................................... 26  
Maintenance.............................................. 26  
Troubleshooting ............................. 27~28  
Before using the remote control .................... 13  
Replacing battery (lithium CR2025) into the  
remote control ................................................... 13  
Controls  
Controls on the system and remote control ...  
......................................................................... 14~15  
Basic Functions  
Switching the system on ................................... 16  
Switching the system to Eco Power Standby  
mode ..................................................................... 16  
Power SavingAutomatic Standby.................... 16  
Adjusting volume and sound............................ 16  
CD/MP3-CD Operation  
Loading a disc ...................................................... 17  
Basic playback controls ..................................... 17  
Playing an MP3/WMA disc ............................... 18  
Different play modes: SHUFFLE and REPEAT19  
Programming track numbers ........................... 19  
Erasing the program .......................................... 19  
Radio Reception  
Tuning to radio stations .................................... 20  
Programming radio stations............................. 20  
Automatic programming .........................................20  
Manual programming ...............................................20  
Tuning to preset radio stations ....................... 20  
External Sources  
Using a non-USB device.................................... 21  
Using a USB mass storage device ................... 21  
Clock/Timer  
Clock setting ....................................................... 23  
8
 
General Information  
Congratulations on your purchase and  
welcome to Philips!  
Place the system in a location with adequate  
ventilation to prevent internal heat build-up in  
your system. Allow at least 10 cm (4 inches)  
clearance from the rear and the top of the unit  
and 5 cm (2 inches) from each side.  
The ventilation should not be impeded by  
covering the ventilation openings with items,  
such as newspapers, table-cloths, curtains, etc.  
Do not expose the system, batteries or discs to  
excessive moisture, rain, sand or heat sources  
caused by heating equipment or direct sunlight.  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
No objects filled with liquids, such as vases, shall  
be placed on the apparatus.  
Install this unit near the AC outlet and where the  
AC power plug can be reached easily.  
The apparatus shall not be exposed to dripping  
or splashing.  
If the system is brought directly from a cold to a  
warm location, or is placed in a very damp room,  
moisture may condense on the lens of the disc  
unit inside the system. Should this occur, the CD  
player would not operate normally. Leave the  
power on for about one hour with no disc in the  
system until normal playback is possible.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
Batteries (battery pack or batteries installed)  
shall not be exposed to excessive heat such as  
sunshine, fire or the like.  
When the system is switched to Standby  
mode, it is still consuming some power.  
To disconnect the system from the  
power supply completely, remove the AC  
power plug from the wall socket.  
To fully benefit from the support that  
Philips offers, register your product at  
This set complies with the FCC rules,  
Part 15 and with 21 CFR 1040.10.  
Operation is subject to the following two  
conditions:  
– This device may not cause harmful  
interference, and  
– This device must accept any interference  
received, including interference that may  
cause undesired operation.  
Environmental Information  
All unnecessary packaging has been omitted.We  
have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene (bags,  
protective foam sheet).  
Your system consists of materials which can be  
recycled and reused if disassembled by a  
specialized company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
Supplied accessories  
– remote control (with battery)  
– FM antenna  
– AM antenna  
– 8 X iPod dock adaptors  
– 1 X certified AC/DC adapter (Input: 100-  
240V ~ 50-60Hz 1.2 A, Output:15V  
3A)  
Safety Information  
Before operating the system, check that the  
operating voltage indicated on the typeplate of  
your system is identical with the voltage of your  
local power supply. If not, please consult your  
dealer.  
Place the system on a flat, hard and stable  
surface.  
Where the MAINS plug or an appliance coupler  
is used as the disconnet device, the disconnet  
device shall remain readily operable.  
9
 
General Information  
Hearing Safety  
Listen at a moderate volume.  
Using headphones at a high volume can impair  
your hearing. This product can produce sounds  
in decibel ranges that may cause hearing loss for  
a normal person, even for exposure less than a  
minute. The higher decibel ranges are offered  
for those that may have already experienced  
some hearing loss.  
Sound can be deceiving. Over time your hearing  
"comfort level" adapts to higher volumes of  
sound. So after prolonged listening, what sounds  
"normal" can actually be loud and harmful to  
your hearing. To guard against this, set your  
volume to a safe level before your hearing  
adapts and leave it there.  
To establish a safe volume level:  
Set your volume control at a low setting.  
Slowly increase the sound until you can hear it  
comfortably and clearly, without distortion.  
Listen for reasonable periods of time:  
Prolonged exposure to sound, even at normally  
"safe" levels, can also cause hearing loss.  
Be sure to use your equipment reasonably and  
take appropriate breaks.  
Be sure to observe the following  
guidelines when using your headphones.  
Listen at reasonable volumes for reasonable  
periods of time.  
Be careful not to adjust the volume as your  
hearing adapts.  
Do not turn up the volume so high that you  
can't hear what's around you.  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations.  
Do not use headphones while operating a  
motorized vehicle, cycling, skateboarding, etc.; it  
may create a traffic hazard and is illegal in many  
areas.  
10  
 
Preparations  
AM loop  
antenna  
FM wire antenna  
AC power adaptor  
Rear connections  
B Antennas Connection  
Connect the supplied AM loop antenna and FM  
antenna to the respective terminals. Adjust the  
position of the antenna for optimal reception.  
The type plate is located at the rear of the  
system.  
A Power  
AMAntenna  
Before connecting the AC power adaptor to the  
wall outlet, ensure that all other connections  
have been made.  
WARNING!  
– For optimal performance, use only the  
original AC power adaptor.  
– Never make or change connections with  
the power switched on.  
To avoid overheating of the system, a safety  
circuit has been built in. Therefore, your  
system may switch to Standby mode  
automatically under extreme conditions. If  
this happens, let the system cool down  
before reusing it (not available for all versions).  
Position the antenna as far as possible from aTV,  
VCR or other radiation source.  
11  
 
Preparations  
FMAntenna  
Connecting other equipment to your  
system  
Use a cinch cable to connect AUX to the  
analogue audio out terminals of an external  
equipment (TV,VCR, Laser Disc player, DVD  
player or CD Recorder).  
Note:  
For better FM stereo reception, connect an  
outdoor FM antenna to the FM AERIAL (FM  
ANTENNA) terminal.  
– If you are connecting equipment with a mono  
output (a single audio out terminal), connect it to  
the AUX left terminal. Alternatively, you can use a  
“single to double” cinch cable (the output sound  
still remain mono).  
C Optional connection  
The optional equipment and connecting cords are  
not supplied. Refer to the operating instructions  
of the connected equipment for details.  
Connecting a USB device or memory  
card  
By connecting a USB mass storage device  
(including USB flash memory, USB flash players  
or memory cards) to the Hi-Fi system, you can  
enjoy the device's stored music through the  
powerful speakers of Hi-Fi system.  
Insert the USB device's USB plug into the  
socket on the set.  
OR  
for the devices with USB cables:  
1 Insert one plug of the USB cable (not supplied)  
to the socket on the set.  
2 Insert the other plug of the USB cable to the  
USB output terminal of the USB device.  
OR  
for the memory card:  
1 Insert the memory card into a card reader (not  
supplied).  
2 Use a USB cable (not supplied) to connect the  
card reader into the  
socket on the set.  
12  
 
Preparations  
CAUTION!  
Before using the remote control  
– Remove battery if it is exhausted or will  
not be used for a long time.  
1 Pull out the plastic protective sheet.  
2 Select the source you wish to control by  
pressing one of the source select keys on the  
remote control (for example DISC, FM).  
– Battery contains chemical substances, so  
they should be disposed of properly.  
Perchlorate Material-special handling  
hazardouswaste/perchlorate.  
3 Then select the desired function (for example  
ÉÅ , à , á).  
Remove the plastic protective sheet  
Replacing battery (lithium  
CR2025) into the remote control  
1 Press the slot on the battery compartment.  
2 Pull out the battery compartment.  
3 Replace a new battery and fully insert the  
battery compartment back to the original  
position.  
1
CR2025  
2
3
13  
 
Controls (illustrations on page 3)  
# SOURCE  
selects the respective sound source for CD/USB/  
iPod/TUNER (FM/AM)/AUX.  
$ PROG  
Controls on the system and  
remote control  
1 STANDBY-ON/ECO POWERB  
switches the system on or to Eco Power  
standby/normal standby with clock display.  
(for CD/MP3WMA/USB) programs tracks.  
(forTUNER) programs radio stations.  
sets the clock function.  
2 Display screen  
shows the status of the system.  
% REPEAT  
for CD/MP3/WMA/USB selects a repeat playback  
3 EJECT 0  
mode.  
ejects a disc from the disc loader.  
^ SHUFFLE  
4 IR SENSOR  
plays disc/USB tracks randomly.  
remote sensor  
5 VOLUME -/+ (VOL +/-)  
adjusts the volume level.  
& TIMER  
sets the timer function.  
* PLAY•MODE  
6 Disc loader  
selects various repeat modes or the shuffle play  
mode for a disc.  
7 S/T  
for CD/MP3-CD/WMA/USB  
( 3 / 4  
(for MP3-CD/WMA/USB) skips to the beginning  
of a current/previous/subsequent album.  
) MUTE  
fast searches back and forward  
within a track/disc (press and  
hold).  
................................. skips to the beginning of a  
current/previous/subsequent  
track.  
interrupts and resumes sound production.  
¡ DSC (Digital Sound Control)  
selects sound characteristics: ROCK/POP/JAZZ/  
CLASSIC.  
8 STOP 9  
stops disc playback or erases a disc program.  
9 ÉÅ  
DBB (Dynamic Bass Boost)  
enhances the bass.  
£ DISPLAY  
selects different disc information display modes  
during playback.  
starts or interrupts playback.  
0 ALBUM/PRESET +/-  
(for MP3-CD/WMA/USB) skips to the beginning  
of a current/previous/subsequent album.  
adjusts the hours and minutes for the clock/timer  
function.  
RDS (no function on this version)  
SLEEP  
selects a preset radio station.  
selects the sleeper time.  
! 5 /6  
for CD/MP3-CD/WMA/USB  
fast searches back and forward  
within a track/disc (press and  
hold).  
forTUNER ........ tunes to radio stations (down/  
up).  
@ ¡ / ™  
for CD/MP3-CD/WMA/USB  
................................. skips to the beginning of a  
current/previous/subsequent  
track.  
14  
 
Controls  
§ MENU  
equivalent to the MENU button on your iPod  
player.  
Numerical Keypad (0~9)  
(for CD/MP3/WMA/USB) selects a track directly.  
BAND  
For tuner (TUNER): press to switch between AM  
and FM.  
ª iPod dock  
is used to dock your iPod player for playback or  
recharging through this system.  
º AUX  
is the jack used to connect an auxiliary device.  
USB DIRECT  
jack for the external USB mass storage device.  
¤ OK  
confirms a selection (for iPod menu operation  
only).  
Notes for remote control:  
– First select the source you wish to control  
by pressing one of the source select keys on  
the remote control (for example CD, FM).  
– Then select the desired function (for  
example ÉÅ, à , á).  
15  
 
Basic Functions  
Press STANDBY-ON/ECO POWER B (or  
B on the remote).  
The backlight for clock display is dim in  
standby.  
iPod  
The volume level (up to a maximum volume  
level of 12), interactive sound settings, last  
selected mode (ECO Power Standby or normal  
standby), source and tuner presets will be  
retained in the player's memory.  
Switching the system to Eco  
Power Standby mode  
Press and hold STANDBY-ON/ECO  
POWER B (or B on the remote) for more  
than 2 seconds.  
The backlight will go blank.  
Power Saving Automatic Standby  
As a power-saving feature, the system  
automatically switches to Eco Power/ Standby 15  
minutes after a CD/MP3/WMA/USB playback  
has reached the end and no control is operated.  
Adjusting volume and sound  
TIMER  
1 Press VOLUME +/- (or VOL +/- on the  
remote control) to decrease or increase the  
volume.  
Display shows the volume levelVOL and a  
number from MIN 01, 02, ...31 MAX.  
2 Press DSC repeatedly to select the desired  
sound effect: ROCK/POP/JAZZ/CLASSIC.  
Important!  
Before you operate the system, complete  
the preparation procedures.  
3 Press DBB to switch bass enhancement on or  
off.  
If the DBB is activated, DBB ON is shown.  
If the DBB is deactivated, DBB OFF is shown.  
Switching the system on  
4 Press MUTE on the remote control to  
interrupt sound reproduction instantly.  
Playback will continue without sound and --  
MUTE-- will flash on the display.  
Press STANDBY-ON/ECO POWER B (or  
B on the remote).  
The system will switch to the last selected  
source.  
To activate sound reproduction you can:  
– press MUTE again;  
Press SOURCE on the top of the system or  
CD, USB, iPod, TUNER or AUX on the  
remote control.  
– adjust the volume controls;  
– change source.  
The system will switch to the selected source.  
To listen through the headphone  
Connect the headphone plug to the n socket  
on the rear of the set.  
Switching the system to standby  
mode  
The speakers will be muted.  
16  
 
CD/MP3-CD Operation  
select CD or press CD on the remote.  
2 Insert a disc into the disc loader..  
Make sure the label side is facing up.  
Make sure you have removed any other disc  
from the slot loader.  
iPod  
3 Press ÉÅ to start playback.  
4 At any time, simply press 9 to stop playback.  
Basic playback controls  
To play a disc  
Press ÉÅ to start playback.  
The current track number and elapsed  
playing time of the track are displayed during  
disc playback.  
To select a different track  
Press S/T (or ¡ / on the remote  
control) once or repeatedly until the desired  
track number appears in the display.  
You can also use the Numerical Keypad  
(0~9) on the remote to select a track directly.  
If you have selected a track number shortly after  
loading a disc or in the PAUSE position, you will  
need to press ÉÅ to start playback.  
TIMER  
Te xt display during playback  
In CD mode  
Press DISPLAY repeatedly to see the  
following information.  
Track number and elapsed playback time of  
current track.  
Track number and total elapsed playback  
time.  
Important!  
The lens of the CD player should never be  
touched.  
Track number and remaining playback time  
of current track.  
Track number and total remaining playback  
time.  
Clock time.  
Loading a disc  
In MP3-CD mode  
This CD player plays Audio Discs including CD  
Recordables, CD-Rewritables and MP3 CD.  
Press DISPLAY to display the ID-3  
information if available and the clock time.  
CD-ROM, CD-I, CDV,VCD, DVD or computer  
CDs, however, are not possible.  
DRM-protected WMA disc is not supported.  
1 Press SOURCE on the top of the system to  
17  
 
CD/MP3-CD Operation  
To find a passage within a track  
Playing an MP3/WMA disc  
1 Press and hold S/T (or 5 /6 on the  
1 Load an MP3/WMA disc.  
remote control).  
The disc reading time may exceed 10  
seconds due to the large number of songs  
compiled into one disc.  
2 When you recognize the passage you want,  
release S/T (or 5 /6 on the remote  
control).  
2 Press ALBUM/PRESET +/- (or 3/ 4on the  
remote control) to select a desired album.  
Normal playback continues.  
3 Press S/T (or ¡ /on the remote  
control) to select a desired track.  
To stop playback  
Press 9.  
The album number will change accordingly as  
you reach the first track of an album by pressing  
S (¡ on the remote) or the last track of an  
album by pressing T (on the remote).  
To interrupt playback  
Press ÉÅ during playback.  
The display freezes and the elapsed playing  
time flashes when playback is interrupted.  
To resume, press ÉÅ again.  
4 Press ÉÅ to start playback.  
Supported MP3 disc formats:  
– ISO9660, Joliet  
– Maximum title number: 999 (depending on  
filename length)  
– Maximum album number: 99  
– Supported sampling frequencies: 32 kHz,  
44.1kHz, 48 kHz  
– Supported Bit-rates: 32~256 (kbps), variable  
bitrates  
Notes:  
CD play will also stop when;  
– you eject the disc.  
– the disc has reached the end.  
– you select another source:TUNER, USB, DOCK  
or AUX.  
– you select standby.  
– the set auto off time expires.  
18  
 
CD/MP3-CD Operation  
Different play modes:SHUFFLE  
and REPEAT  
You can select and change the various play  
modes before or during playback.The REPEAT  
modes can also be combined with PROGRAM.  
Programming track numbers  
Program in the STOP position to select and  
store your disc tracks in the desired sequence. If  
you like, store any track more than once. Up to  
40 tracks can be stored in the memory.  
1 Press PROG to enter the programming mode.  
1 To select your play mode, press PLAY•MODE  
(SHUFFLE or REPEAT on the remote  
control) before or during playback until the  
display shows the desired function.  
A track number flashes.  
2 Press S/T (or ¡ / on the remote  
control) to select your desired track number.  
appears if the shuffle playback is activated  
For an MP3 CD/WMA, press ALBUM/  
PRESET +/- (or ¡ / on the remote control)  
to select a desired album number.  
and disappears if deactivated.  
If  
appears, it indicates to play the current  
track repeatedly.  
3 Press PROG to confirm the track number to be  
stored.  
If  
ALL is displayed, it indicates to play all  
tracks in the whole disc repeatedly.  
For an MP3 CD/WMA, if both  
PRX displays, in which Xdenotes the next  
program number to be stored.  
and ALB  
flash on the display panel, it indicates to play the  
current album repeatedly.  
4 Repeat steps 2-3 to select and store all desired  
tracks.  
2 Press ÉÅ to start playback if in the STOP  
position.  
PROGRAM FULLappears if you attempt to  
program more than 40 tracks.  
If you have selected SHUFFLE, playback starts  
automatically.  
5 Press 9 to finish programming.  
PROG displays on the screen.  
3 To return to normal playback, press the  
6 To start playback of your disc program, press  
PLAY•MODE (SHUFFLE or REPEAT on  
ÉÅ directly.  
the remote control) until  
longer displayed.  
or  
is no  
Erasing the program  
You can also press 9 to stop playback and  
cancel your play mode.  
You can erase the program by:  
pressing 9 once in the STOP mode;  
Note:  
pressing 9 twice during playback;  
– The Repeat and Shuffle functions cannot be  
activated simultaneously.  
PROGdisappears.  
ejecting the current disc;  
19  
 
Radio Reception  
Programming radio stations  
You can store up to a total of 20 radio stations  
for each band in the memory.  
iPod  
Automatic programming  
Automatic programming will start with a chosen  
preset number. From this preset number  
upwards, former programmed radio stations will  
be overridden.  
1 Press ALBUM/PRESET +/- (or ¡ / on the  
remote control) to select the preset number  
where programming should start.  
Note:  
– If no preset number is selected, default is preset  
(1) and all your presets will be overridden.  
2 Press PROG for more than two seconds to  
activate programming.  
All available stations are programmed.  
TIMER  
Manual programming  
1 Tune to your desired station (refer to “Tuning to  
radio stations”).  
2 Press PROG to activate programming.  
PROG flashes in the display.  
3 Press ALBUM/PRESET +/- (or ¡ / on the  
remote control) to allocate a number from 1 to  
20 to this station.  
Tuning to radio stations  
1 Press SOURCE repeatedly (or TUNER on the  
remote control) to select the tuner source.  
4 Press PROG again to confirm the setting.  
PROG disappears, the preset number and  
the frequency of the preset station are shown.  
2 Press BAND on the remote control to select  
the desired waveband : FM or AM.  
5 Repeat the above four steps to store other  
3 Hold S/T (or 5 /6 on the remote  
control) and then release the button.  
stations.  
The system will start searching for a radio  
station with sufficient signal strength.  
You can override a preset station by storing  
another frequency in its place.  
4 Repeat step 3 if necessary until you find the  
Tuning to preset radio stations  
desired station.  
To tune to a weak station, press S/T (or  
Press ALBUM/PRESET +/- (or 3/ 4on the  
remote control) until the desired preset station  
is displayed.  
5 /6 on the remote control) briefly and  
repeatedly until you have found optimal  
reception.  
20  
 
External Sources  
b) If your Mass storage device required a battery/  
power source. Please make sure you have a fresh  
battery in it or charge the USB device first and  
then plug it into the product again.  
– Supported Music type:  
Using a non-USB device  
1 Connect the audio out terminals of the external  
equipment (TV,VCR, Laser Disc player, DVD  
player or CD Recorder) to the AUX terminals of  
your system.  
a)This device only supports unprotected music  
with the following file extension:  
2 Press SOURCE repeatedly (or AUX on the  
remote control) to select external equipment.  
.mp3  
.wma  
Notes:  
b) Music bought from on-line music stores are not  
supported because they are secured by Digital  
Rights Management protection (DRM).  
c) File name extensions that end with the  
following are not supported:  
– All the sound control features (DSC or DBB, for  
example) are available for selection.  
– Refer to the operating instructions for the  
connected equipment for details.  
.wav; .m4a; .m4p;mp4; .aac and etc.  
– No Direct connection can be made from  
Computer USB port to the product even you have  
either or both mp3 or wma files in your computer.  
Using a USB mass storage device  
By connecting a USB mass storage device to the  
Hi-Fi system, you can enjoy the device's stored  
music through the powerful speakers of the Hi-Fi  
system.  
Supported formats:  
– USB or memory file format FAT12, FAT16,  
FAT32 (sector size: 512 bytes)  
– MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
Playing a USB mass storage device  
Compatible USB mass storage devices  
With the Hi-Fi system, you can use:  
– WMA v9 or earlier  
– USB flash memory (USB 2.0 or USB1.1)  
– USB flash players (USB 2.0 or USB1.1)  
– memory cards (requires an additional card  
reader to work with this Hi-Fi system)  
– Directory nesting up to a maximum of 8  
levels  
– Number of albums/ folders: maximum 99  
– Number of tracks/titles: maximum 400  
– ID3 tag v2.0 or later  
Notes:  
– File name in Unicode UTF8 (maximum length:  
128 bytes)  
– In some USB flash players (or memory devices),  
the stored contents are recorded using copyright  
protection technology. Such protected contents will  
be unplayable on any other devices (such as this  
Hi-Fi system).  
The system will not play or support the  
following:  
– Empty albums: an empty album is an album  
that does not contain MP3/WMA files, and  
will not be shown in the display.  
– Compatibility of the USB connection on this  
product:  
a)This product supports most USB Mass storage  
devices (MSD) that are compliant to the USB  
MSD standards.  
i) Most common Mass storage class devices are  
flash drives, memory sticks, jump drives and etc.  
ii) If you see a "Disc Drive" show up on your  
computer after you plugged the mass storage  
device into your computer, most likely it is MSD  
compliant and it will work with this product.  
– Non-supported file formats are skipped.This  
means that e.g.:Word documents .doc or  
MP3 files with extension .dlf are ignored and  
will not be played.  
– AAC, WAV, PCM audio files  
– DRM protected WMA files  
– WMA files in Lossless format  
21  
 
External Sources  
How to transfer music files from PC to a  
USB mass storage device  
Notes:  
– If you have not organized MP3/WMA files into  
any albums on your disc, an album "01" will be  
automatically assigned for all those files.  
– Make sure that the file names of MP3 files end  
with .mp3. and the file names ofWMA files end  
with .wma.  
– For DRM protectedWMA files, useWindows  
Media Player 10 (or later) for conversion.Visit  
Media Player andWM DRM (Windows Media  
Digital Rights Management).  
By dragging and dropping music files, you can  
easily transfer your favorite music from PC to a  
USB mass storage device.  
For the flash player, you can also use its music  
management software for the music transfer.  
However, thoseWMA files may be  
unplayable for compatibility reasons.  
How to organize your MP3/WMA files on  
the USB mass storage device  
This Hi-Fi system will browse the MP3/WMA  
files in the folders/sub-folders/titles order.  
Example:  
1 Check the USB device has been properly  
connected. (See Installation: Connecting an  
additional appliance).  
Root  
2 Press SOURCE (USB on the remote) once or  
more to select USB.  
Title 001  
Title 002  
Title 003  
NO FILEappears if no audio file is found in  
the USB device.  
3 Play the USB's audio files as you do with the  
albums/tracks on a CD (See CD/MP3  
Operations).  
Album 01  
Title 001  
Title 002  
Title 003  
Notes:  
– For compatibility reasons, the album/track  
information may differ from what it is displayed  
through flash players' music management software.  
– File names or ID3 tags will be displayed as --- if  
they are not in English.  
Album 02  
Title 001  
Title 002  
Title 003  
Album 03  
Title 001  
Title 002  
Title 003  
Organize your MP3/WMA files in different  
folders or subfolders as required.  
22  
 
Clock/Timer  
Timer setting  
iPod  
The system can be used as an alarm clock,  
whereby the CD,TUNER, USB or DOCK is  
switched on at a set time (one time operation).  
The clock time needs to be set first before the  
timer can be used.  
During setting, if no button is pressed within 90  
seconds, the system will exit timer setting mode  
automatically.  
1 Press TIMER for more than two seconds.  
2 Press SOURCE repeatedly to select the sound  
source.  
SET TIMER” and “SELECT SOURCE” are  
displayed.  
3 Press TIMER to confirm your desired mode.  
The clock digits for the hours flash.  
4 Press ALBUM/PRESET +/- (or ¡ / on the  
remote control) to set the hours.  
5 Press TIMER again.  
The clock digits for the minutes flash.  
6 Press ALBUM/PRESET +/- (or ¡ / on the  
TIMER  
remote control) to set the minutes.  
7 Press TIMER to confirm the time.  
The timer is now set and activated.  
Activating and deactivating timer  
In standby or during playback, press TIMER  
once on the remote control.  
Clock setting  
Display shows if activated, and disappears if  
deactivated.  
The clock can be set in either 12-hour or  
24-hour mode (12HRor 24HRfor example).  
1 In standby mode, press PROG.  
SET CLOCKis displayed briefly.Then, 12HR  
or 24HRis displayed.  
2 Press ALBUM/PRESET +/- (or ¡ / on the  
remote control) to select clock mode.  
The clock digits for the hours continue to  
flash.  
3 Press ALBUM/PRESET +/- (or ¡ / on the  
remote control) to set the hours.  
4 Press PROG again.  
The clock digits for the minutes flash.  
5 Press ALBUM/PRESET +/- (or ¡ / on the  
remote control) to set the minutes.  
6 Press PROG to confirm the time.  
23  
 
Clock/Timer  
Sleep timer setting  
The sleep timer enables the system to switch off  
by itself after a set period of time.  
1 Press SLEEP on the remote control repeatedly  
to select a preset time.  
The selections are as follows (time in  
minutes):  
OFF 90 75 60 45 30 15 ™  
OFF 90 …  
"SLEEP XX" is displayed. "XX" is the time in  
minutes.  
is displayed if the sleep time you have  
selected is not OFF.  
2 When you reach the desired length of time, stop  
pressing the SLEEP button.  
To deactivate the sleep timer  
Press SLEEP repeatedly until "0FF" is displayed,  
or press ECO POWER/STANDBY ON 2.  
24  
 
iPod Dock  
Compatible iPod players  
Playing an iPod portable player  
Most Apple iPod models with 30-pin dock  
connectors as follows: 20GB, 40GB, 20/30GB  
Photo, 40/60GB Photo, 30GBVideo, 60GBVideo,  
80GBVideo, Mini, Nano and Nano 2nd  
generation.  
1 Correctly dock your iPod portable player in the  
cradle. Make sure the dock adaptor is  
compatible.  
Make sure that you have powered on your iPod  
player before selecting DOCK source.  
On the display, "iPod" is displayed if iPod is  
connected.  
Selecting the correct dock  
adaptor  
8 iPod dock adaptors of different type, as  
indicated at the back of the adaptor, are included  
to fit the following iPod:  
20GB, 40GB, 20/30GB Photo, 40/60GB Photo,  
30GBVideo, 60GBVideo,80GBVideo,Mini,  
Nano and Nano 2nd generation.  
2 Press SOURCE on the system repeatedly or  
iPod on the remote control to select iPod  
source.  
3 Playback starts automatically.You can select  
available features (such as play/pause, skip track,  
fast forward/backward, menu selection) during  
playback.  
Setup  
Charging iPod battery using the  
dock  
In DOCK mode, directly dock your iPod  
portable player on the cradle for charging.  
Insert a dock adaptor corresponding to the  
portable player you use.  
2
Note:  
1
– For the purpose of SAVING POWER, recharging  
of your iPod or USB device is NOT SUPPORTED  
when the main set is in the STANDBY MODE.  
To connect with a different iPod portable player,  
pop up the corresponding dock adaptor and  
replace with a new one of the matching type.  
25  
 
Specifications  
AMPLIFIER  
USB PLAYER  
Output power ....................................... 2 x 15W RMS  
Signal-to-noise ratio....................................... 70 dBA  
Frequency response ...... 20 Hz – 20 KHz, 3 dB  
Input sensitivity AUX ....................... 0.5V (max. 2V)  
Impedance loudspeakers ......................................... 4 Ω  
Impedance headphones ........................................ 32 Ω  
Output power headphones ....................... <50 mW  
USB ................................................................... 12Mb/s,V1.1  
......................................... support MP3 and WMA files  
Number of albums/folders .................maximum 99  
Number of tracks/titles...................... maximum 400  
GENERAL INFORMATION  
AC Power ............................. 100 – 240V / 50-60 Hz  
Dimensions (w x h x d) . 206 x 141 x 390 (mm)  
Weight....................................................................... 2.33 kg  
Standby power consumption ............................<7W  
Eco power standby .................................................<1W  
CD PLAYER  
Frequency range ................................ 20 Hz – 20 kHz  
Signal-to-noise ratio............................................ 70 dBA  
TUNER  
FM wave range ................................... 87.5 – 108 MHz  
Sensitivity at 75 Ω  
Specifications and external appearance are  
subject to change without notice.  
– FM ................................................................................ 20dBf  
Selectivity ................................................................. 25 dB  
Total harmonic distortion..................................... 1%  
Frequency response  
– FM .............................................................. 63 – 6000 Hz  
Signal-to-noise-ratio  
– FM ....................................................................... 50 dBA  
Maintenance  
Cleaning the disc lens  
Cleaning the Cabinet  
After prolonged use, dirt or dust may  
accumulate at the disc lens.To ensure good  
playback quality, clean the disc lens with Philips  
CD Lens Cleaner or any commercially available  
cleaner. Follow the instructions supplied with  
cleaner.  
Use a soft cloth slightly moistened with a mild  
detergent solution. Do not use a solution  
containing alcohol, spirits, ammonia or abrasives.  
Cleaning Discs  
When a disc becomes dirty,  
clean it with a cleaning cloth.  
Wipe the disc from the centre  
out.  
Do not use solvents such as  
benzene, thinner, commercially  
available cleaners, or antistatic spray intended for  
analogue records.  
26  
 
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will invalidate the  
warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If you  
are unable to remedy a problem by following these hints, consult your dealer or Philips for  
help.  
Problem  
Solution  
PLEASE INSERT CD/MP3 DISC” is  
displayed.  
Insert a disc.  
Check if the disc is inserted upside down.  
Wait until the moisture condensation at the lens  
has cleared.  
Replace or clean the disc, see “Maintenance”.  
Use a finalised CD-RW or correct format disc.  
If the signal is too weak, adjust the antenna or  
connect an external antenna for better  
reception.  
Increase the distance between the Micro HiFi  
System and yourTV orVCR.  
Radio reception is poor.  
Remove and reconnect the AC power plug and  
switch on the system again.  
The system does not react when buttons  
are pressed.  
Adjust the volume.  
Disconnect the headphone.  
Sound cannot be heard or is of poor  
quality.  
Select the source (CD orTUNER, for example)  
The remote control does not function  
properly.  
before pressing the function button (ÉÅ, 5 /  
6).  
Reduce the distance between the remote  
control and the system.  
Insert the battery with its polarities  
(+/– signs) aligned as indicated.  
Replace the battery.  
Point the remote control directly toward  
IR sensor on the front of the system.  
The timer is not working.  
Set the clock correctly.  
Switch on the timer.  
The Clock/Timer setting is erased.  
Power has been interrupted or the power cord  
has been disconnected. Reset the clock/timer.  
27  
 
Troubleshooting  
Problem  
Solution  
Some files on the USB device are not  
displayed.  
Check if the number of folders exceeds 99 or  
the number of titles exceeds 400.  
DEVICE NOT SUPPORTED” scrolls on the  
display.  
Remove the USB mass storage device or select  
another source.  
28  
 
PHILIPS LIMITED WARRANTY  
ONE (1) YEAR  
WARRANTY COVERAGE:  
PHILIPS warranty obligation is limited to the terms set forth  
below.  
Philips, or (d) if any Philips serial number has been removed or  
defaced, or (e) product, accessories or consumables sold “AS IS”  
without warranty of any kind by including refurbished Philips  
product sold “AS IS” by some retailers.  
WHO IS COVERED:  
Philips warrants the product to the original purchaser or the per- This Limited Warranty does not cover:  
son receiving the product as a gift against defects in materials and  
workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
Shipping charges to return defective product to Philips.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
screen markings resulting from viewing fixed stationary con-  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of Philips.  
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Damage from mishandled shipments or transit accidents when  
returning product to Philips.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
repair of products damaged by these modifications.  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
WHAT IS COVERED:  
The Philips warranty covers new products if a defect in material  
or workmanship occurs and a valid claim is received by Philips  
within the Warranty Period. At its option, Philips will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or most  
comparable to the original product in Philips current inventory,  
or (3) refund the original purchase price of the product.  
Philips warrants replacement products or parts provided under  
this warranty against defects in materials and workmanship from  
the date of the replacement or repair for ninety (90) days or for  
the remaining portion of the original product’s warranty,  
whichever provides longer coverage for you. When a product or  
part is exchanged, any replacement item becomes your property  
and the replaced item becomes Philips’ property. When a refund  
is given, your product becomes Philips’ property.  
Product lost in shipment and no signature verification receipt  
can be provided.  
Failure to operate per Owner’s Manual.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO  
RICO, OR U.S. VIRGIN ISLANDS…  
Contact Philips Customer Care Center at:  
1-888-PHILIPS (1-888-744-5477)  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all requirements  
can result in delay.  
TO OBTAIN ASSISTANCE IN CANADA…  
1-800-661-6162 (French Speaking)  
1-888-PHILIPS (1-888-744-5477) - (English or Spanish  
Speaking)  
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-  
TATIONS:  
This Limited Warranty applies only to the new products manu-  
factured by or for Philips that can be identified by the trademark,  
trade name, or logo affixed to it. This Limited Warranty does not REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
apply to any non-Philips hardware product or any software, even  
if packaged or sold with the product. Non-Philips manufacturers,  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-  
suppliers, or publishers may provide a separate warranty for their TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
own products packaged with the bundled product.  
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-  
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE  
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT  
IS LIMITED IN DURATION TO THE DURATION OF THIS  
WARRANTY.  
Philips is not liable for any damage to or loss of any programs,  
data, or other information stored on any media contained within  
the product, or any non-Philips product or part not covered by  
this warranty. Recovery or reinstallation of programs, data or  
other information is not covered under this Limited Warranty.  
Some states do not allow the exclusions or limitation of inciden-  
tal or consequential damages, or allow limitations on how long an  
implied warranty lasts, so the above limitations or exclusions may  
not apply to you.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-Philips product, (b)  
to damage caused by service performed by anyone other than  
Philips or Philips Authorized Service Location, (c) to a product or  
a part that has been modified without the written permission of  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Philips, P.O. Box 671539, Marietta, GA. 30006-0026  
3121 233 48802  
29  
 
PHILIPS CONSUMER ELECTRONICS NORTH AMERICA  
P.O. BOX 671539, Marietta, GA. 30006-0026  
Meet Philips at the Internet  
DCM230  
CLASS 1  
LASER PRODUCT  
Printed In China  
PDCC-JH-0802  
 

Pelco Home Security System BK4000 BK4024 User Manual
Pelco Home Security System Not ICS110 CW User Manual
Philips Barcode Reader 3121 233 42852 User Manual
Philips TV VCR Combo 14PV111 01 User Manual
Pioneer DVD Recorder DVR 650H K User Manual
Pioneer TV Receiver GEX P5750TV User Manual
Planet Technology Switch FNSW 4800v2 User Manual
Powermate Portable Generator PM052530303 User Manual
Procom Indoor Fireplace V50HYLC User Manual
ProForm Home Gym 831215210 User Manual