DM200i™, DM300i™, DM400i™, DM300L™, DM400L™ Mailing Machines
Get new postage rates today,
RCG8XX
automatically switch on January 4!
Your meter will continue to use current rates until January 4, 2010. The new rates you download today
will automatically activate on January 4.
Prepare to get new rates
1
2
As you normally would for a postage refill,
Connect your meter to an analog phone line that is
•
not shared by any other machine (such as a Fax).
Connect to Pitney Bowes
From the Ready screen,
Press the Options key.
•
•
Select Setup Menu.
Select Updates and Add-Ons.
•
•
Select IntelliLink - Get Update.
(A series of communications messages will appear on the screen.)
Get new rates
3
When the screen displays “Update Available”,
Press the Yes key.
•
(A series of communications messages will appear on the screen. This will take about 3 minutes.)
If you are prompted to update your presets, it is suggested that you DO NOT update your presets
at this time. Instead, after your rate update is complete, use our NEW & IMPROVED method
for setting up presets on the reverse side.
4
5
New rate shown below will
appear on January 4, 2010
CONGRATULATIONS!
0 lb 1.0 oz
Jan 4.2010
You will know the rates have successfully
Jan 4.2010
$0.44
$0.00
downloaded when your system returns to
Class:
XXXX
the Ready screen.
OR
Class:
1stReg Letter
Ready to Print
Printing Not Available
New rates will take effect on January 4.
Ready screen when Control Center
is connected to Mailing
Machine Base
Ready screen when Control Center
is not connected to Mailing
Machine Base
Continue on reverse side.
|