Poulan Cultivator 545212826 User Manual

R
Please do not return product to retailer.  
Por favor, no devuelva el producto al lugar de compra.  
Veuillez ne pas retourner le produit au détaillant.  
1--800--554--6723  
Register your product online at:  
Registre su producto en línea en:  
Enregistrez votre produit en ligne à l’adresse :  
Instruction Manual  
Manual de Instrucciones  
Manuel d’Instructions  
PP2000T  
WARNING:  
Read and follow all Safety Rules and Operating Instructions before  
using this product. Failure to do so can result in serious injury. Refer  
to your original manual for additional Warnings and Operating  
Instructions.  
ADVERTENCIA:  
Lea el manual de instrucciones y siga todas las advertencias e  
instrucciones de seguridad. El no hacerlo puede resultar en le-  
siones graves. Refiera a su manual original para las Instrucciones  
de Funcioniamiento y las Advertencias adicionales.  
AVERTISSEMENT:  
Lire le manuel d’instructions et bien respecter tous les avertisse-  
ments et toutes les instructions de sécurité. Tout défaut de le faire  
pourrait entraîner des blessures graves. Référez--vous à votre  
manuel original pour des Avertissements et des Instructions d’Uti-  
lisation additionnels.  
Poulan PRO  
7349 Statesville Road  
Charlotte, NC 28269  
545212826 Rev. 3 6/15/10 BRW  
 
S Secure hair above shoulder length. Secure  
or remove loose clothing or clothing with  
loosely hanging ties, straps, tassels, etc.  
They can be caught in moving parts.  
install the proper wall outlet. Do not change  
the equipment plug, extension cord recep-  
tacle, or extension cord plug in any way.  
S To reduce risk of electrical shock, use exten-  
sion cords specifically marked as suitable for  
outdoor appliances having electrical rating not  
less than the rating of unit. Cord must be  
marked with suffix “W--A” (in Canada “W”).  
Make sure your extension cord is in good  
condition. Inspect extension cord before use  
and replace if damaged. Do not use a dam-  
aged cord. Cord insulation must be intact with  
no cracks or deterioration. Plug connectors  
must be undamaged. The extension cord  
used to reach the power source must be  
heavy enough to carry current from the power  
source the full length of the extension cord to  
the unit. An undersized extension cord will  
cause a drop in line voltage resulting in loss of  
power and overheating. If in doubt, use the  
next heavier gauge. The lower the gauge  
number, the heavier the cord.  
S Being fully covered also helps protect you  
from debris and pieces of toxic plants  
thrown by spinning tines.  
S Stay alert. Do not operate when you are  
tired, ill, upset, or under the influence of al-  
cohol, drugs, or medication. Watch what  
you are doing; use common sense.  
S Wear hearing protection.  
S Never start or run inside a closed room or  
building. Breathing exhaust fumes can kill.  
S Keep handles free of oil and fuel.  
S Never operate the cultivator without the tine  
guard in place and properly secured.  
FUEL SAFETY (for gas powerheads)  
S Mix and pour fuel outdoors.  
S Keep away from sparks or flames.  
S Use a container approved for fuel.  
S Do not smoke or allow smoking near fuel or  
the powerhead.  
S Do not use multiple cords.  
S Do not abuse cord. Never carry the unit by the  
extension cord or yank extension cord to dis-  
connect unit. To unplug, grasp the plug, not  
the cord. Do not use cord as a handle, close a  
door on cord, or pull cord around sharp edges  
or corners. Do not expose cords to heat, oil,  
or water.  
S Avoid spilling fuel or oil. Wipe up all fuel  
spills before starting the powerhead.  
S Move at least 10 feet (3 meters) away from  
fueling site before starting powerhead engine.  
S Stop engine and allow to cool before re-  
moving fuel cap.  
S Remove fuel cap slowly.  
S Keep the extension cord clear of operator and  
obstacles at all times.  
S Store unit and fuel in an area where fuel va-  
pors cannot reach sparks or open flames  
from water heaters, electric motors or  
switches, furnaces, etc.  
S Tie cord to cord retainer and connect to re-  
cessed plug as shown in this manual to pre-  
vent damage to unit and/or extension cord  
and to reduce the possibility of the extension  
cord disconnecting from the unit during op-  
eration.  
ELECTRICAL SAFETY (for electric  
powerheads)  
S Do not attempt to repair unit. Inspect the insu-  
lation and connectors on the powerhead and  
extension cord before each use. If there is  
any damage, do not use until damage is re-  
paired by your authorized service dealer.  
S Do not use the powerhead if the switch  
does not turn the unit on and off properly.  
Have the unit repaired by your authorized  
service dealer.  
S Do not use with damaged cord or plug. If pow-  
erhead is not working as it should, has been  
dropped, damaged, left outdoors, or dropped  
into water, return it to your authorized service  
dealer for repair.  
S Avoid unintentional starting of the unit. Never  
carry unit with your finger on the switch. Be  
sure the switch is in the OFF position and  
never touch the switch when connecting ex-  
tension cord.  
S Unplug the unit from the power source when  
not in use, before servicing, and when chang-  
ing accessories and/or attachments.  
S Avoid any body contact with any grounded  
conductor, such as metal fences, or pipes, to  
avoid the possibility of electric shock.  
WARNING: Avoid a dangerous envi-  
ronment. To reduce the risk of electrical shock,  
do not use in rain, in damp or wet locations, or  
around swimming pools, hot tubs, etc. Do not  
expose to snow, rain, or water to avoid the pos-  
sibility of electrical shock. Do not use on wet  
surfaces. Do not handle extension cord plug or  
unit with wet hands.  
S Use only a voltage supply as shown on the  
nameplate of the unit.  
S Avoid dangerous situations. Do not use in  
presence of flammable liquids or gases to  
avoid creating a fire or explosion and/or caus-  
ing damage to unit.  
S Avoid dangerous environments. Do not use in  
unventilated areas or where dust or explosive  
vapors can build up.  
S To reduce the risk of electric shock, the pow-  
erhead may have a polarized plug (one blade  
is wider than the other); if so, it will require the  
use of a polarized extension cord. The ap-  
pliance plug will fit into a polarized extension  
cord only one way. If the plug does not fit fully  
into the extension cord, reverse the plug. If  
the plug still does not fit, obtain a correct polar-  
ized extension cord. A polarized extension  
cord will require the use of a polarized wall  
outlet. This plug will fit into the polarized wall  
outlet only one way. If plug does not fit fully  
into the wall outlet, reverse the plug. If it still  
does not fit, contact a qualified electrician to  
S Ground Fault Circuit Interrupter (GFCI)  
protection should be provided on the circuit or  
outlet to be used for the powerhead. Recep-  
tacles are available having built-in GFCI  
protection and may be used for this measure  
of safety.  
3
 
S Hold the unit firmly with both hands.  
S Keepfirmfootingand balance. Do not over-  
reach or stand on unstable surfaces.  
S Look behind and use care when backing up.  
S Keep all parts of your body away from the  
tines and muffler.  
UNIT/MAINTENANCE SAFETY  
WARNING: Disconnect powerhead  
spark plug (or disconnect powerhead from pow-  
er source) before performing maintenance.  
S Inspect entire unit before each use. Re-  
place damaged parts. Check for fuel leaks.  
Make sure all fasteners are in place andse-  
curely fastened.  
S Maintain unit according to recommended  
procedures.  
S Have all maintenance and service not ex-  
plained in this manual performed by an au-  
thorized service center.  
S Throw away tines that are bent, warped,  
cracked, broken, or damaged in any other  
way. Replace parts that are cracked,  
chipped, or damaged before using the unit.  
S Use only recommended Poulan PRO parts  
and accessories. Never use wire, wire  
rope, string, flailing devices, etc.  
S Be sure tines stop turning when engine  
idles (see CARBURETOR ADJUST-  
MENTS section of powerhead manual).  
S Removethetines before makingcarburetor  
adjustments. Hold the unit by hand.  
S Keep others away when making carburetor  
adjustments.  
S Never start the unit with the clutch housing  
removed. The clutch can fly off and cause  
serious injury.  
S Do not force the unit. Use only for jobs ex-  
plainedinthis manual. Use only for cultivat-  
ing. Do not abuse unit. Do not use in rain or  
wet locations.  
S Use only in daylight or good artificial light.  
TRANSPORTING AND STORAGE  
S Stop powerhead before leaving work area.  
S Allow powerhead and gearbox to cool be-  
fore storing or transporting it in a vehicle.  
S Store unit andfuelin area where fuelvapors  
cannot reach sparks or open flames from  
water heaters, electric motors or switches,  
furnaces, etc.  
S Store attachment so tines cannot acciden-  
tally cause injury.  
S Store attachment indoors, out of reach of  
children.  
If situations occur which are not covered in  
this manual, use care and good judgment. If  
you need assistance, call 1-800-554-6723.  
SPECIAL NOTICE: Exposure to vibrations  
through prolonged use of gasoline powered  
hand tools could cause blood vessel or nerve  
damage in the fingers, hands, and joints of  
people prone to circulation disorders or abnor-  
mal swellings. Prolonged use in cold weather  
has been linked to blood vessel damage in  
otherwise healthy people. If symptoms occur  
such as numbness, pain, loss of strength,  
change in skin color or texture, or loss of feeling  
in the fingers, hands, or joints, discontinue the  
use of this tool and seek medical attention. An  
anti-vibration system does not guarantee the  
avoidance of these problems. Users who oper-  
ate power tools on a continual and regular basis  
must monitor closely their physical condition  
and the condition of this unit.  
S Avoid heavy contact with solid objects that  
might stop the tines. If heavy contact oc-  
curs, stop the unit and inspect for damage.  
S If tines strike a foreign object, follow these  
steps: stop unit and disconnect spark plug  
wire (or disconnect from power source), in-  
spect for damage, and repair any damage  
before resuming operation of the unit.  
S Never douse or squirt the attachment with  
water or any other liquid. Cleanunit and de-  
cals with a damp sponge (see STORAGE).  
CULTIVATING SAFETY  
WARNING: Inspect the area to be cul-  
tivated before each use. Remove objects  
(rocks, vines, branches, broken glass, nails,  
wire, string, etc.) which can be thrown by the  
tines or can wrap around the shaft.  
SAVE THESE INSTRUCTIONS  
4
 
OPERATION  
KNOW YOUR CULTIVATOR ATTACHMENT  
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR  
CULTIVATOR ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself  
with the location of the various controls and adjustments. Save this manual for future reference.  
Hanger  
Cutting Tines  
CUTTING TINES  
TINE GUARD  
The CUTTING TINES are designed to loosen  
soil.  
The TINE GUARD provides partial protection  
from the rotating tines.  
NOTE: The cutting tines can not be turned  
by hand due to the gear ratio.  
OPERATING THE COUPLER  
Coup
Your powerhead is equipped with a coupler  
which enables optional attachments to be  
installed. The optional attachments are:  
MODEL:  
Edger . . . . . . . . . . . . . . . . . . . . . . PPB1000E  
Blower . . . . . . . . . . . . . . . . . . . . . PPB3000B  
Pruner . . . . . . . . . . . . . . . . . . . . . PPB5000P  
Pruner . . . . . . . . . . . . . . . . . . . . . PPB5500P  
Brushcutter* . . . . . . . . . . . . . . . . PPB4000C  
*not designed for use with electric powerheads  
Attachment  
SEN  
Knob  
TIGHTEN  
WARNING: Always disconnect pow-  
erhead spark plug (or disconnect powerhead  
frompower source) beforeremoving or instal-  
ling attachments.  
2. Press and hold the locking/release button.  
Locking/Release  
Button  
REMOVING ATTACHMENT  
CAUTION: When removing or installing at-  
tachments, place the powerhead and attach-  
ment on a flat surface for stability.  
1. Loosen the coupler by turning the knob  
counterclockwise.  
Upper Shaft  
Attachment  
Coupler  
3. While securely holding the upper shaft,  
pull the attachment straight out of the cou-  
pler.  
5
 
INSTALLING ATTACHMENT  
1. Remove the shaft capfrom theattachment  
(if present) and discard.  
WARNING: To avoid personal injury,  
never carry the cultivator while the unit is run-  
ning.  
2. Position locking/release button of attach-  
ment into guide recess of upper shaft cou-  
pler.  
WARNING: The gearbox gets very  
hot after extended periods of use. To avoid  
burns, do not touch the gearbox until it has  
been allowed to cool.  
3. Push the attachment into the coupler until  
the locking/release button snaps into the  
primary hole.  
4. Before using the unit, tighten the knob se-  
curely by turning clockwise.  
CULTIVATING  
1. Move the cultivator to the work area prior to  
starting the engine/motor.  
Primary Hole  
Coupler  
Guide Recess  
2. With the engine/motor running and the  
tines off the ground, press the throttle trig-  
ger to increase the engine speed.  
3. Hold trigger handle and assist handle firm-  
ly. Slowly lower the cultivator until the  
tines make contact with the ground.  
Locking/  
Release  
Button  
Upper  
Shaft  
Attachment  
WARNING: Make sure the locking/  
release button is locked in the primary hole  
and the knob is securely tightened before op-  
erating the unit. Using the wrong hole could  
lead to serious injury or damage to the unit.  
4. As unit begins cultivating, pull back on the  
unit so that the tines can penetrate the  
ground.  
Locking/Release  
Button in Primary Hole  
INSTALLING ATTACHMENT  
HANGER  
An attachment hanger is provided for storage  
when attachment is not in use.  
To install hanger on attachment:  
1. Remove the shaft capfrom theattachment  
(if present) and discard.  
2. Press and hold the locking/release button.  
3. Push hanger onto the attachment until the  
locking/release button snaps into the hole.  
OPERATING POSITION  
ALWAYS WEA
Eye Protection  
5. Once the ground has been broken, contin-  
ueat a moderatepace until you are familiar  
with the controls and the handling of the  
cultivator.  
Long Pan
6. Pull the cultivator backwards to improve  
the depth of cultivation andreduce your ef-  
fort.  
Heavy Sho
7. To cultivate in confined areas or narrow  
rows, remove the left and right outer tines  
(see TINE REPLACEMENT).  
6
 
MAINTENANCE  
TINE MAINTENANCE  
WARNING: Always stop unit anddis-  
connect spark plug wire (or disconnect pow-  
erheadfrompower source) before performing  
maintenance.  
WARNING: The tines will continue to  
spin after the engine stops or after the throttle  
trigger has been released. To avoid serious  
injury, make sure the tines have stopped  
coasting and disconnect the spark plug (or  
disconnect powerhead from power source)  
before performing work on the tines.  
CHECK FOR DAMAGED OR  
WORN PARTS  
Contact an authorized service center for re-  
placement of damaged or worn parts.  
S Tine Guard -- Discontinue useof cultivator if  
tine guard is damaged.  
WARNING: Always replace tines  
that are bent, warped, cracked, broken, or  
damaged in any other way. Never attempt to  
straighten and reuse a damaged tine. Use  
only specified replacement tines. Wear pro-  
tective gloves when handling or performing  
maintenance on the tines to help avoid injury.  
CHECK FOR LOOSE  
FASTENERS AND PARTS  
S Clevis pins  
S Hitch pin clips  
INSPECT AND CLEAN UNIT AND  
DECALS  
S After each use, inspect complete unit for  
loose or damaged parts. Clean the unit and  
decals using a damp cloth with a milddeter-  
gent.  
S Wipe off unit with a clean dry cloth.  
SERVICE AND ADJUSTMENTS  
2. Remove the tines and felt cushions from  
the shaft.  
TINE REPLACEMENT  
3. Clean and oil the shaft.  
WARNING: The tines will continue to  
spin after the engine stops or after the throttle  
trigger has been released. To avoid serious  
injury, make sure the tines have stopped  
coasting and disconnect the spark plug (or  
disconnect powerhead from power source)  
before performing work on the tines.  
4. Replace the tines and the felt cushions.  
WARNING: Wear protective gloves  
when handling or performing maintenance on  
the tines to avoid injury. The tines become very  
sharp from use.  
1. Remove the hitch pin clips and clevis pins.  
5. Repeat previous steps on opposite side.  
6. Reinstall clevis pins and hitch pin clips.  
NOTE: When installed correctly, the hubs  
on the tines will face each other. The letters  
“R” stamped on the tines will be on the right  
side of the cultivator and the letters “L” will be  
on the left side.  
Clevi
7
 
STORAGE  
S Clean the entire attachment.  
WARNING: Perform the following  
steps after each use:  
S Inspect the tine guard area and clean any  
dirt or debris that has collected. Inspect the  
tines; replace tines that are bent, warped,  
cracked, broken or damaged in any other  
way.  
S Allow attachment and gearbox to cool be-  
fore storing or transporting.  
S Position attachment so that any sharp ob-  
ject cannot accidentally cause injury.  
S Store the attachment in a dry, well venti-  
lated area out of the reach of children.  
S Lightly oil external metal surfaces.  
S Check entire attachment for loose screws  
or nuts. Replace any damaged, worn or  
broken parts.  
S At the beginning of the next season, use  
only fresh fuel having the proper gasolineto  
oil ratio.  
SEASONAL STORAGE  
Prepare attachment for storage at end of sea-  
son or if it will not be used for 30 days or more.  
If your cultivator attachment is to be stored for  
a period of time:  
LIMITED WARRANTY  
Poulan PRO, a division of Husqvarna Consum-  
er Outdoor Products N.A., Inc., warrants to the  
original consumer purchaser that each new  
Poulan PRO brand gasoline tool or attachment  
is free from defects in material and workman-  
ship and agrees to repair or replace under this  
warranty any defective gasoline product or at-  
tachment as follows from the original date of  
purchase.  
In Canada, contact:  
Poulan PRO  
850 Matheson Blvd. West  
Mississauga,Ontario L5V 0B4  
Giving the model number, serial number and  
date of purchase of your product and the name  
and address of the authorized dealer from  
whom it was purchased.  
THIS WARRANTY GIVES YOU SPECIFIC  
LEGAL RIGHTS, AND YOU MAY HAVE OTH-  
ER RIGHTS WHICH VARY FROM STATE TO  
STATE.  
NO CLAIMS FOR CONSEQUENTIAL OR  
OTHER DAMAGES WILL BE ALLOWED,  
AND THERE ARE NO OTHER EXPRESS  
WARRANTIES EXCEPT THOSE EX-  
PRESSLY STIPULATED HEREIN.  
SOME STATES DO NOT ALLOW LIMITA-  
TIONS ON HOW LONG AN IMPLIED WAR-  
RANTY LASTS OR THE EXCLUSION OR  
LIMITATIONS OF INCIDENTAL OR CONSE-  
QUENTIAL DAMAGES, SO THE ABOVE LIM-  
ITATIONS OR EXCLUSION MAY NOT APPLY  
TO YOU.  
This is a limited warranty within the meaning of  
that term as defined in the Magnuson--Moss Act  
of 1975.  
2 YEARS - Parts and Labor, when used for  
household purposes.  
90 DAYS - Parts and Labor, when used for  
commercial, professional, or income producing  
purposes.  
30 DAYS - Parts and Labor, if used for rental  
purposes.  
This warranty is not transferable and does not  
cover damage or liability caused by improper  
handling, improper maintenance or alteration, or  
the use of accessories and/or attachments not  
specifically recommended by Poulan PRO for  
this tool. This warranty does not cover parts that  
will wear and require replacement with reason-  
able use during the warranty period. This war-  
ranty does not cover pre--delivery setup or nor-  
mal adjustments explained in the instruction  
manual. This warranty does not cover trans-  
portation costs.  
The policy of Poulan PRO is to continuously  
improve its products. Therefore, Poulan PRO  
reserves the right to change, modify, or dis-  
continue models, designs, specifications,  
and accessories of all products at any time  
without notice or obligation to any purchaser.  
In the event you have a claim under this warran-  
ty, you must return the product to an authorized  
service dealer.  
Should you have any unanswered questions  
concerning this warranty, please contact:  
Poulan PRO, a division of Husqvarna  
Consumer Outdoor Products N.A., Inc.  
7349 Statesville Road  
Charlotte, NC 28269  
1--800--554--6723  
8
 

Peavey Guitar Quilt Top User Manual
Philips Car Amplifier TDA1510AQ User Manual
Philips Clothes Dryer GL1015 User Manual
Philips Fryer HD 4266 User Manual
Philips Iron GC4620 User Manual
Philips Tool Storage Mini6 User Manual
Philips Universal Remote SBC RU 430 1 User Manual
Planar Home Theater Screen EL640480 AM User Manual
Polycom Network Router DOC2231A User Manual
PYLE Audio Computer Monitor PLVW1550IR User Manual