QSC Audio Car Speaker k12 Yoke User Guide

K12 YOKE  
K Series Loudspeaker Accessory  
User Manual  
Yoke spacer 2 components  
M5 x 25 mm screw with thread locking patch 4 components  
Steel yoke bracket – side 1 1 component  
Steel yoke bracket – side 2 1 component  
Steel yoke bracket – center extension 1 component  
M6 x 16 mm screw 6 components  
M6 flat washer 6 components  
M6 self-locking nut 6 components  
M8 x 25 mm screw 2 components  
M8 split lock washer 2 components  
M8 flat washer 2 components  
This yoke mount is specifically for mounting the QSC K12 loudspeaker to a structural support element (lighting or soundstage truss or other load  
bearing truss, etc.). It is not to be used as a wall mount or other attachment to non-load rated structure.  
IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS  
WARNING!  
Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, enclosures, transducers, brackets  
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the  
strength of the installation or placement. Any such condition severely reduces the safety of the installation and should be immediately  
corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected  
overloading. Never exceed the rating of the hardware or equipment.  
Consult a licensed, Professional Engineer regarding physical equipment installation. All local, state and national regulations regarding the  
safety and operation of equipment are understood and adhered to.  
Do not use this yoke bracket to attach the K12 to a wall or other architectural element!  
Attach the base of this yoke bracket to the load-bearing structure using appropriate load-rated hardware approved for the application.  
Install in accordance with instructions by QSC Audio Products, LLC instructions and under the supervision of a licensed Professional Engineer.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and  
maintenance (servicing) instructions in this manual.  
TD-000291-00-A  
© 2009 QSC Audio Products, LLC. All Rights Reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in  
the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.  
Patents may apply or be pending.  
*TD-000291-00*  
 

Pyramid Car Audio Car Stereo System CDR83MP User Guide
Radio Shack Cordless Telephone 900 MHz Digital Spread Spectrum Cordless Phone with Dual Caller ID User Guide
Radio Shack Headphones 33 1187 User Guide
Radio Shack Karaoke Machine 32 1156 User Guide
Radio Shack Weather Radio 12 251 User Guide
RCA Clock Radio RCD215 User Guide
Roland Electronic Keyboard DP 990 User Guide
Safety 1st Baby Monitor 8047 User Guide
Sanyo Camera Accessories HR SCU User Guide
Sears Automobile Parts 143999 User Guide