RCA Universal Remote RCRH02BR User Guide

RCRH02BR  
2-Device Universal Remote Control User’s Guide  
Congratulations on your purchase of the RCRH02BR. This 2-Device Remote Control does just what a basic remote  
should: simplify! Made for streamlined 2-device TV and cable/satellite/digital TV converter setups, this remote is the  
ultimate in de-cluttering, leaving you just the buttons you need and none of the ones you don't. And with tactile cues  
on the channel and volume keys, all it takes is a touch to know what you're doing. Like all RCA remotes, this 2-Device  
Remote is easy to program, with support for over 210 brands* of TVs, satellite receivers, cable boxes and digital TV  
converter boxes.  
* May not operate all models of all brands.  
RCRH02BR  
Guía del Usuario del Control Remoto Universal para 2 Aparatos  
Felicitaciones por la compra del RCRH02BR. Este Control Remoto para 2 Aparatos hace justo lo que un control  
remoto básico debería hacer: ¡simplificar! Fabricado para configuraciones de 2 aparatos, TV y convertidores para  
TV por cable/satelital/digital, este control remoto es lo más avanzado en sencillez, dejándole sólo los botones que  
usted necesita y ninguno de los que usted no requiere. Y con señales táctiles en las teclas de volumen y canal, todo  
lo que precisa es un toque para saber lo que está haciendo. Como todos los controles remotos RCA, este control  
remoto para 2 aparatos es fácil de programar, con soporte para más de 210 marcas* de TVs, receptores satelitales,  
convertidores para TV por cable y convertidores para TV digital.  
* Puede no funcionar en todos los modelos de todas las marcas.  
©2011 Audiovox Accessories Corporation  
111 Congressional Blvd., Suite 350  
Carmel, IN 46032  
Trademarks ® Registered.  
Marques ® déposées.  
Marcas registradas ®.  
Made in China  
Fabriqué en Chine  
Hecho en China  
RCRH02BR NA IB 01  
UEI 16K Codes 2011 00  
 
4.Point the remote directly at the front panel of the device you want to  
control. Press the POWER key and wait for the indicator light to blink.  
Each time the indicator light blinks, the remote is testing a code with the  
device. Make sure you keep the remote pointed at the device you want to  
operate.  
ENGLISH  
Step 1: Install Batteries  
Your RCRH02BR universal remote requires 2 new AAA alkaline batteries (sold separately).  
To install the batteries:  
1. Turn the unit over, remove screw and remove the battery door compartment cover.  
5.As soon as the component turns off, press the ENTER key within 4  
2. Insert the batteries, matching the batteries to the (+) and (-) marks inside  
the battery case.  
seconds.  
Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next  
code—you will need to start the code search from step 1 again.  
Battery Precautions:  
• Do not mix old and new batteries.  
The indicator light flashes 8 times and turns off when the remote has searched all the  
codes. If this happens, try one of the other programming methods.  
• Do not mix alkaline, standard (carbon-zinc) or rechargable (nickel-cadmium) batteries.  
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National  
Regulations.  
6.Test the remote with your component to make sure you can control most  
of the devices functions. If some features don’t work, try the Direct Code  
Entry method.  
Step 2: Program the Remote  
To use this universal remote with your home entertainment system, first you need to program it to control your devices.  
There are three ways you can program the universal remote to operate your devices:  
The Auto Code Search goes automatically through all the codes for the device you’re trying to control. Its the  
easiest method, but it can sometimes take longer than some of the other programming methods.  
Direct Code Entry  
The Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. Its not as  
easy as the other methods, but its potentially the fastest method.  
Direct Code Entry lets you enter a code from the code list at the end of this manual for your brand of device. Its not as  
easy as the other methods, but its potentially the fastest method.  
The Manual Code Search lets you manually go through all the codes for the device you’re trying to control.  
Auto Code Search  
1.Manually turn on the component you want to program the remote to  
operate.  
The Auto Code Search goes automatically through all the codes for the device you’re trying to control. When you find  
the one that operates your device, you can stop the search and store that code.  
2.Find the four-digit code for your brand of TV, satellite receiver, cable box, or  
1.Manually turn on the component you want to program the remote to  
digital TV converter in the code list at the end of this manual.  
operate.  
3.Press and hold the CODE SEARCH key until the indicator light turns on.  
2.Press and hold the CODE SEARCH key until the indicator light turns on.  
4.Press the component key you want to program—TV or SAT·CBL·DTC.  
The indicator light blinks and then remains lit.  
Note: “DTC” stands for Digital TV Converter.  
3. Press the component key you want to program—TV or SAT·CBL·DTC.  
The indicator light blinks once and remains lit.  
5.Enter the four-digit code, using the numeric keypad. After the code is  
Important: Find the ENTER key on your remote (don’t press it yet). You will need to  
press this key quickly in step 5 below.  
entered, the indicator light turns off.  
Note: If the indicator light blinks multiple times, you’ve entered an invalid code. Start  
from step 2 again.  
ENGLISH  
2
ENGLISH  
 
3
6.Aim the remote at the component and  
Accessing Menus  
This remote supports menu access, navigation and selection for many makes and models of TV and satellite receivers,  
press the POWER key.  
If the component turns off: The remote is programmed to operate this  
component.  
cable boxes or digital TV converters. The amount of menu functionality varies from model to model and from brand to  
brand.  
If the component does NOT turn off: Try the next code for your brand.  
To use the Menu function:  
Note: If no codes work, or if your brand is not listed, try the Auto Code Search or  
Manual Code Search.  
1.Press the component button whose menu you wish to access (TV or SAT·CBL·DTC).  
2.Press the MENU key. The menu of the chosen component is shown. While in Menu Mode the Red LED will blink  
Manual Code Search  
until you exit or Menu function times out. the keys on this remote function as follows:  
The Manual Code Search lets you go one-by-one through all the codes for the device you’re trying to control. When  
you find the one that operates your device, you can stop the search and store that code.  
Vol up/ down  
Ch +/-  
Cursor moves right/left Cursor moves up/down  
1.Manually turn on the component you want to program the remote to  
Note: Some functions of some brands may not be fully supported.  
operate.  
3.To exit the menu mode press the corresponding component key on the remote (TV or SAT·CBL·DTC).  
Accessing Digital Channels  
2.Press and hold the CODE SEARCH key until the indicator light turns on.  
The INPUT and — (dash) key lets you enter a digital sub-channel number, like 59.1, directly. Use the number keys to  
enter the main channel number (in this case, “59”). Then press the INPUT (–) key and press the subchannel number  
(in this case, “1”). When you’re not entering channel numbers, the INPUT key toggles through all the video sources  
connected to your TV as well.  
3. Press the component key you want to program—TV or SAT·CBL·DTC.  
Programming Channel Control Lock  
The indicator light blinks once and remains lit.  
Important: Find the ENTER key on your remote (don’t press it yet). You will need to  
press this key quickly in step 5 below.  
By default, in TV mode the remote controls channel-control capabilities are locked to the Cable Box or Satellite  
Receiver or Digital TV Converter. The affected keys are 1 through 0, Ch , CH  
and Go Back. This will guarantee  
that you do not inadvertently change a channel on your TV. However you can deactivate this feature to allow full  
access to these keys in TV mode.  
Unlocking Channel Control  
4.Point the remote directly at the front panel of the device you want to  
control. Press the POWER key once every 2-3 seconds until your  
component turns off.  
1.On the remote Control, press SAT/CBL/DTC key and hold the key down. At the same time press and hold down  
the CH  
until the LED turns red and stays on. Then press the Enter key to unlock and save.  
Note: Since this remote has hundreds of codes, you may have to press the POWER  
key many (perhaps hundreds of) times using this method.  
Now the remote control will provide TV channel control capabilities while in the TV mode.  
Locking Channel Control to SAT/CBL/DTC  
1.On the remote Control, press SAT/CBL/DTC key and hold the key down. At the same time press and hold down  
the Ch  
until the LED turns red and stays on. Then press the Enter key to lock and save.  
5.As soon as the component turns off, press the ENTER key within 4  
seconds.  
Now the remote control will provide channel control capabilities while in the SAT/CBL/DTC mode.  
Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next  
code—you will need to start the code search from step 1 again.  
Retrieving Remote Codes  
The indicator light flashes 8 times and turns off when the remote has searched all the  
codes. If this happens, try one of the other programming methods.  
Once you’ve found the code that works best with your component, you might want to write it down so that you can  
use it if you ever need to program a remote for this component again.Thats easy if you used the Direct Code Entry  
method—just write down the code you used from the list. However, if you used the Auto Code Search or Manual Code  
Search, you will need to go through the following steps to know exactly which code you’re using.  
6.Test the remote with your component to make sure you can control most  
of the devices functions. If some features don’t work, try the Direct Code  
Entry method.  
1.Press and hold the CODE SEARCH key until the indicator light turns on.  
2.Press the component key that matches the components code you are retrieving (TV, SAT•CBL•DTC). The  
indicator light blinks once and then remains lit.  
 
ENGLISH  
ENGLISH  
4
5
3.Press the CODE SEARCH key again. The indicator light turns off.  
4.Starting with 0 on the keypad, press the number keys in order (0-9) until the indicator light turns on. The number  
that causes the indicator light to light up is the first digit of your code. Write it down in the space provided below.  
5.Repeat step 4 until you have retrieved all four numbers of the code.  
TV  
SAT•CBL•DTC  
Limited Lifetime Warranty  
Audiovox Electronics Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal  
use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or  
replaced (at the Companys option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty,  
the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the  
Company at the address shown below. Do not return this product to the retailer.  
This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This Warranty is not transferable and  
does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Companys  
opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or the simultaneous  
use of different battery types (e.g. alkaline, standard or rechargeable).  
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED  
ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE  
PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE  
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is  
authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.  
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential  
damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other  
rights, which vary from state/province to state/province.  
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788  
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5  
Consumer Help Line: 1-800-420-7968  
Care and Maintenance  
Keep the remote dry. If it gets wet, wipe it dry immediately.  
Use and store the remote only in normal temperature environments.  
Handle the remote gently and carefully. Don't drop it.  
Keep the remote away from dust and dirt.  
Wipe the remote with a damp cloth occasionally to keep it looking new.  
Modifying or tampering with the remote's internal components can cause malfunction and invalidate its warranty.  
ENGLISH  
6
 

Radica Games Games 71027 User Guide
Radica Games Games 72045 User Guide
Radio Shack Two Way Radio FRS User Guide
Radio Shack Watch 06A00 User Guide
RIDGID Pressure Washer RD80770 User Guide
Ruby Tech Switch GS 2108C User Guide
Ryobi Brush Cutter RY15702 User Guide
Samsung Blu ray Player HT H6500WM User Guide
Sanus Systems Indoor Furnishings NFV249 User Guide
Sanyo Air Conditioner 12KHS71 User Guide