MODEL 135/2
STRIP CUT PAPER SHREDDER
OPERATING & MAINTENANCE
INSTRUCTIONS
Please read this manual carefully.
It will answer all your questions regarding installation,
operation and trouble-shooting.
IMPORTANT
BE SURE TO ADHERE TO ALL SAFETY SUGGESTIONS LISTED.
READ CAREFULLY BEFORE USING
MANUAL No. 300-35
WASHINGTON D.C. • SUWANEE, GEORGIA • SACRAMENTO, CALIFORNIA • IRVINE, CALIFORNIA • IRVING, TEXAS
The world leader in document and sensitive waste destruction solutions
OVERLOADING
When the cutting system is “overloaded”, switch the shredder off, then into reverse to clear
the cutting system. To continue shredding, reduce the amount of material being destroyed
and restart the shredder.
CAUTION: In the event of a severe overload or jam, DO NOT attempt to
clear the jam by alternately switching from forward to reverse constantly. This
action may result in motor or drive system damage, which cannot be repaired
within the scope of the guarantee. In addition, the resulting situation may require
a service technician to manually clear the overfeed.
THERMAL OVERLOAD CUT-OUT
The Model 135 Shredder is protected against excessive current draw with a built-in
thermo-element, which causes it to switch off automatically. If an overload should
happen, shut off the shredder and allow 10 to 20 minutes for the motor to cool off.
LUBRICATION
a) If shredding 10-15 minutes a day, oil cutters once a week.
b) If shredding 2-3 hours a day, oil cutters once a day.
c) For continuous shredding, oil every 15 minutes after reversing cutters
to clean out machine.
d) Do not oil a running machine.
e) After oiling, allow shredder to run for a short period of time to ensure even
distribution of the oil.
IMPORTANT: To prevent jamming and/or clogging, it is necessary to periodically reverse
the cutters to clean them out, then lubricate the cutting unit.
03/14/00
Page 2
Model 135 Manual
SPECIFICATIONS
Feed Opening
Sheets Per Feed
Feed Speed
10" Wide
Up to 22 Sheets
24 FPM
Shred Size
1/4"
Motors
9/16 HP, 120V/1/60 HZ, 5.5 Amps.
31" H x 18" W x 14" D
2 CUBIC FEET
52 LBS
Dimensions
Bag Capacity
Net Weight
OPTIONAL ITEMS
Box of 100, Plastic Waste Bags #132
Product No. 640SB132
Case of 8, One Pint Bottles Lubricating Oil Product No. 649OIL8
Case of 16, One Pint Bottles Lubricating Oil Product No. 649OIL16
CONTACT:
Security Engineered Machinery
P.O. Box 1045
5 Walkup Drive
Westboro, MA 01581
Tel: 800/225-9293
Fax: 508/836-4154
Email: [email protected]
03/14/00
Page 3
Model 135 Manual
03/14/00
Page 4
Model 135 Manual
03/14/00
Page 5
Model 135 Manual
03/14/00
Page 6
Model 135 Manual
03/14/00
Page 7
Model 135 Manual
|