PYLE Audio PLTK120 User Manual

HTTP://WWW.PYLEAUDIO.COM  
TV TUNER SYSTEM  
PLTK120  
,
OWNER S MANUAL  
Selecting channels and adjusting the sound  
Precautions  
POWER  
MUTE  
Please read this manual completely and carefully before installing the equipment.  
Use the CH+ and CH- buttons to select channels.  
AVC  
VOL-  
AUTO  
VOL+  
CH+  
Use the VOL+ and VOL- buttons to increase or decrease audio volume.  
You will see a Volume Bar on screen indicating relative volume level.  
To disable the audio output, press the MUTE button. To cancel the muting  
function, press MUTE button again.  
1. Do not operate this equipment while driving, safe driving should always be your highest priority.  
2. Do not install these components in an area exposed to rain, moisture, direct sunlight, extreme  
heat or cold, excessive dust, dirt or humidity.  
MENU  
CH-  
TV TUNER  
REMOTE  
3. Immediately unplug the power cord and send the TV Tuner to your local dealer or service center as soon as  
possible:  
Please note: VOL+, VOL- and MUTE buttons are disabled in AV mode.  
a) If there is smoke or any peculiar odor present during use.  
b) If there is damage to any of the component casings.  
Providing A/V audio to your car radio  
If your radio has AUX line-level inputs, you can attach the A/V audio output  
connectors to these inputs with RCA-RCA interconnect cables.  
4. To avoid damage and risk of electronic shock, protect this equipment from getting humid or wet,  
If this does occur, unplug the power cord immediately and send the unit to your local dealer  
or service center as soon as possible.  
5. Do not attempt to repair, open or disassemble any of the components. Dangerous high voltage is present  
and may cause an electric shock.  
6. Use only a power source with 12 Volts DC (negative ground).  
7. Do not place objects on or suspend objects from the power cord, as this may damage the cord.  
8. Do not twist or place the power cord near any source of heat in the vehicle.  
9. Do not attempt to repair a damaged, broken or deffective power cord. Replace it with a new one immediately.  
8
3
SYSTEM FEATURES AND CONTROLS  
Remote function  
POWER  
MUTE  
1. POWER: Power on/off  
TUNER BOX  
REMOTE CONTROL  
AVC  
VOL-  
AUTO  
VOL+  
CH+  
MENU  
2. MENU: In AV mode push the MENU button to access on screen menu.  
Use CH- or CH+ button to move on screen point to next or previous  
command item. And use VOL+ or VOL- button to increase or decrease  
current option value. In TV mode MENU is invalidated.  
CH-  
TV TUNER  
REMOTE  
MUTE  
POWER  
POWER KEY  
AVC KEY  
MUTE KEY  
ANT IN  
REMOTE  
POWER  
MUTE  
AVC  
VOL-  
AUTO  
VOL+  
AUTO KEY  
CH+ KEY  
CH+  
AVC  
VOL-  
AUTO  
VOL+  
Selecting the input mode  
CH+  
MENU  
Tuner can switch between three different video sources using the  
remote control. These modes are:  
TV Mode: for receiving TV Channels.  
AV1: external audio and video inputs for DVD, VCD or video game.  
AV2: external audio and video inputs for DVD, VCD or video game.  
MENU  
VOL- KEY  
CH- KEY  
VOL+ KEY  
MENU KEY  
CH-  
TV TUNER SYSTEM  
TV TUNER  
REMOTE  
CH-  
A/V OUTPUT  
AUDIO VIDEO  
POWER  
MUTE  
DC 12V  
AUDIO  
R
L
TV TUNER  
REMOTE  
Programming channels for TV  
AVC  
VOL-  
AUTO  
VOL+  
CH+  
The tuner system can memorize channels in both TV modes. Press the  
AUTO button on the remote, the tuner will begin scanning all of the  
available channels and put them into memory.  
MENU  
CH-  
TV TUNER  
REMOTE  
7
4
Connection  
Installation and Electrical Connections  
1. Find a suitable location for the tuner unit and mount it securely  
in place. Be sure to place it in an area away from moisture and  
dirt, and where incoming cables will not be walked on or pulled  
accidentally.  
ANTENNA  
INFRARED  
REMOTE RECEIVER  
REMOTE  
ANT IN  
2. Make all required audio, video and power connections to the  
appropriate connectors on the tuner as indicated in the drawing  
below to suit you system installation. Install the infrared remote  
eye in a location you know will be available in line-of-sight with  
the remote control use location.  
TV TUNER SYSTEM  
PLTK120  
A/V OUTPUT  
AUDIO  
DC 12V  
AUDIO  
R
L
VIDEO  
TO DC+12V  
GROUND  
Please note that the following drawing describes connections  
for all system possibilities and your particular system may vary  
from this.  
POWER  
AV  
MENU  
+
-
AV3  
5
6

Pyramid Car Audio XPA 240 User Manual
Planar Systems Car Video System PT1745RPF User Manual
Panasonic DMC FH4 User Manual
Panasonic AJ HPM100MC User Manual
Olympus PPO E02 User Manual
Nikon 3300 User Manual
Lochinvar WB50 thru 210 User Manual
Lanzar Car Audio OPTISCION OPTS5202 User Manual
Kenwood Car Stereo System TM 631A User Manual
Kenwood Car Stereo System R 1000 User Manual