Pelco Switch C1906 PP User Manual

®
C1906, C1925, C19125,  
C1906/PP and C1925/PP  
Pre-wired Interconnecting  
Inverting Cables  
Installation/Operation Manual  
C930M-E (12/95)  
Amended 1/96  
PELCO • 3500 Pelco Way, Clovis, CA 93612-5699 • (559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
 
INSTALLATION AND OPERATION MANUAL  
MODELS C1906, C1925, C19125, C1906/PP,  
AND C1925/PP  
PRE-WIRED INTERCONNECTING  
INVERTING CABLES  
1.0 WARNINGS  
3.0 DESCRIPTION  
1. Installation and Servicing should only be done  
by Qualified Service Personnel.  
The C1906, C1906/PP, C1925, C1925/PP and C19125  
are pre-wired cables designed for interconnecting  
Pelco’s Coaxitron® receiver/driver with various Pelco  
domes or any inverted PT180-24P/PT280-24P pan/tilt  
application as listed below.  
2. The installation shall be done in accordance  
with all local and national electrical and me-  
chanical codes utilizing only approved mate-  
rials.  
C1906, C1925, C19125  
Domes:  
ED2820, ED2820-3, ED2820-SL,  
ED2920, ED2920-SL,  
3. Unless the cable is specifically marked “WA”  
(for use in wet locations), the cable is designed  
for indoor use only and it must not be installed  
where exposed to rain and moisture.  
SB2800, SB2800-2, SB2800-SL,  
SB2800-SL-2, SB2801  
SS3000, SS3002  
2.0 SCOPE  
Pan/Tilts:  
PT180-24P, PT180-24SL,  
PT280-24P, PT280-24SL  
The information within this manual covers the installa-  
tion and operation of the C1906, C1925, C19125,  
C1906/PP, and C1925/PP pre-wired interconnecting  
inverting cables.  
C1906/PP, C1925/PP  
Domes:  
ED2820-PP, ED2820SL/PP,  
ED2820-3SL/PP, SB2800/PP,  
SB2800-SL/PP  
Please thoroughly familiarize yourself with the infor-  
mation in this manual prior to installation and opera-  
tion.  
Pan/Tilts:  
PT180-24P/PP,  
PT280-24P/PP, PT280-24SL/PP  
3.1 MODEL NUMBERS  
C1906  
6 ft (1.83 m), pre-wired intercon-  
necting inverting cable. (UL)  
C1925  
25 ft (7.62 m), pre-wired intercon-  
necting inverting cable. (UL)  
C19125  
C1906/PP  
C1925/PP  
125 ft (38.1 m), pre-wired inter-  
connecting inverting cable. (UL)  
6 ft (1.83 m), same as C1906 but  
for PP models. (UL)  
25 ft (7.62 m), same as C1925 but  
for PP models. (UL)  
Pelco Manual C930M-E (12/95)  
1
 
4.0 SPECIFICATIONS  
ELECTRICAL  
6.0 OPERATION  
By using the controller, you should be able to control  
the pan and tilt functions of the pan/tilt and the focus,  
iris, and zoom functions of the motor operated lens.  
Connectors:  
Receiver side  
Pan/tilt side  
CPC, 37 sockets  
CPC, 14 pins  
CPC, 28 pins (PP models)  
6.1 SYSTEM TEST  
Using the controller, operate the following functions  
and verify correct operation of each function:  
Cable:  
12 conductor with shield, 20 Awg  
RG59/U  
1. Pan Left  
GENERAL  
2. Pan Right  
3. Tilt Up  
Cable length:  
C1906  
C1925  
C19125  
C1906/PP  
C1925/PP  
4. Tilt Down  
5. Zoom Wide  
6. Zoom Telephoto  
7. Iris Open  
8. Iris Closed  
9. Focus Near  
10. Focus Far  
6 ft (1.83 m) long  
25 ft (7.62 m) long  
125 ft (38.1 m) long  
6 ft (1.83 m) long  
25 ft (7.62 m) long  
Maximum Wire  
Temperature:  
140° F (60° C)  
If all the above functions operate correctly, the instal-  
lation process is complete. If all the above functions do  
not operate correctly, refer to Section 7.0, Troubleshoot-  
ing Guidelines.  
5.0 INSTALLATION  
1. Run the cable from the Coaxitron® receiver/driver  
to the pan/tilt. Be careful not to abrade or cut the  
jacket on the cable since this could result in a short.  
For PP models check all of the above again  
using a set preset location.  
2. Connect the 37-pin CPC connector to the  
Coaxitron® receiver/driver.  
3. Connect the 14-socket CPC connector (28-pin PP  
models) to the pan/tilt unit.  
4. Operate the control unit and determine correct op-  
eration of the unit. If the unit fails to operate cor-  
rectly, refer to the troubleshooting guidelines out-  
lined in Section 7.0.  
2
Pelco Manual C930M-E (12/95)  
 
7.0 TROUBLESHOOTING GUIDELINES  
NOTE: These cables are designed for use  
in inverted applications. If you wish to modify  
the cable for upright operation, pins 3 and 7  
(pan) and pins 5 and 6 (tilt) need to be re-  
versed on the 14- or 28-pin connector (pan/  
tilt side). The problem can be corrected in the  
field with a CPC pin/socket extracting tool  
by simply exchanging the pins for these func-  
tions. If you do not have the necessary tool,  
contact Pelco for a R/A number to exchange  
the cable.  
1. If none of the functions in Section 6.1 operate cor-  
rectly, check the connection of the CPC connec-  
tors to the Coaxitron® receiver/driver and pan/tilt.  
2. If the connections are loose, tighten the lock ring  
on the CPC connectors and start the system test  
procedure in Section 6.1.  
3. If the connections are tight, check the Coaxitron®  
receiver/driver to determine if it is operating cor-  
rectly. If the Coaxitron® receiver/driver is operat-  
ing correctly, there may be a problem with the cable  
and Pelco’s Technical Assistance Program (TAP)  
should be contacted for further technical trouble-  
shooting aid. To contact the TAPline, call 1-800-  
289-9100.  
8.0 SCHEMATICS  
Refer to Figures 1-3 for wiring diagrams of the pre-  
wired cables.  
Figure 1. C1906, C1925, and C19125 Wiring Diagram  
Pelco Manual C930M-E (12/95)  
3
 
Figure 2. C1906/PP and C1925/PP Wiring Diagram  
4
Pelco Manual C930M-E (12/95)  
 
Figure 3. C1906/PP and C1925/PP Wiring Diagram for Use with Upright Pan/Tilts Only  
Pelco Manual C930M-E (12/95)  
5
 
9.0 WARRANTY AND RETURN  
INFORMATION  
WARRANTY  
RETURNS  
Pelco will repair or replace, without charge, any merchandise proved  
defectiveinmaterialorworkmanshipforaperiodofoneyearafterthedate  
of shipment.  
In order to expedite parts returned to the factory for repair or credit, please  
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an  
authorization number (CA number if returned for credit, and RA number  
if returned for repair).  
Exceptions to this warranty are as noted below:  
All merchandise returned for credit may be subject to a 20% restocking  
and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the  
assigned CA or RA number and freight should be prepaid. Ship to the  
appropriate address below.  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and  
keyboard).  
Three years on Camclosure® and fixed camera models, except the  
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2,  
and MC3651H-2X camera models, which have a five-year warranty.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto  
Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto  
Rico and are instructed to return goods to the USA, you may do one of the  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and  
DF5/DF8 Series fixed dome products.  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, includ-  
ing when used in continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding  
wiper blades).  
Eighteen months on DX Series digital video recorders, NVR300  
Series network video recorders, and EnduraSeries distributed  
network-based video products.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
One year (except video heads) on video cassette recorders (VCRs).  
Video heads will be covered for a period of six months.  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods  
to:  
Six months on all pan and tilts, scanners or preset lenses used in  
continuousmotionapplications(thatis,presetscan,tourandautoscan  
modes).  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
Pelco will warrant all replacement parts and repairs for 90 days from the  
date of Pelco shipment. All goods requiring warranty repair shall be sent  
freight prepaid to Pelco, Clovis, California. Repairs made necessary by  
reason of misuse, alteration, normal wear, or accident are not covered  
under this warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or  
loss resulting from the specific use or application made of the Products.  
Pelco’s liability for any claim, whether based on breach of contract,  
negligence, infringement of any rights of any party or product liability,  
relating to the Products shall not exceed the price paid by the Dealer to  
Pelco for such Products. In no event will Pelco be liable for any special,  
incidental or consequential damages (including loss of use, loss of profit  
and claims of third parties) however caused, whether by the negligence  
of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The  
Dealer may also have additional rights, which are subject to variation from  
state to state.  
Ifawarrantyrepairisrequired,theDealermustcontactPelcoat(800) 289-  
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA),  
and provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice  
number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall  
under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
®
Method of return shipment shall be the same or equal to the method by  
which the item was received by Pelco.  
Pelco  
300 West Pontiac Way, Clovis, CA 93612-5699  
(559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
(Product specifications subject to change  
without notice.)  
Pelco, the Pelco logo, Camclosure, Esprit,  
Genex, Legacy, and Spectra are registered  
trademarks of Pelco.  
C930M-D  
Endura and ExSite are trademarks of Pelco.  
© Copyright 1995, Pelco. All rights reserved.  
6
Pelco Manual C930M-E (12/95)  
 

Perlick Webcam DC72S User Manual
Phase Technology Speaker PC 05 User Manual
Philips Home Theater System DVP3950 User Manual
Philips Home Theater System LX710 User Manual
Philips Range 1145AZ User Manual
Philips Surge Protector SPP7357WC User Manual
Pioneer Car Video System DEH 11E User Manual
Planar Computer Monitor PV174 User Manual
Planet Technology Network Router PL 201 UK US User Manual
Precor Treadmill 842i User Manual