Polaroid DVD Player DVP 0600 User Manual

DVD Player  
DVP 0600  
Operation Manual  
- 1 -  
 
Important Safety Instructions  
WARNING: To reduce the risk of fire or  
electric shock, DO NOT expose this product  
to rain or moisture.  
The lighting flash with arrowhead symbol within a triangle  
alerts the user to “dangerous voltage” which could cause electric shock.  
The exclamation point within a triangle alerts the user to read important operating  
and maintenance instructions in the manual.  
IMPORTANT FOR LASER PRODUCTS  
CLASS 1 LASER PRODUCT  
1. DANGER: Visible laser radiation when  
open and interlock failed or defeated. Avoid  
direct exposure to beam.  
2. CAUTION: Do not open the top cover.  
There are no user service-able parts inside  
the unit, leave all servicing to qualified  
service personnel.  
NOTES  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
9)  
Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding type  
plug has two blades and a third grounding prong. The wide blade or the third  
prong is provided for your safety. If the provided plug does not fit into your outlet,  
consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or  
has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with  
liquids, such as vases, shall be placed on the apparatus.  
- 3 -  
 
Features  
DUAL COMPATIBILITY  
VIDEO OUT  
Supports both “Progressive scan” and Standard Video, S-Video and easy  
“Interlaced” televisions.  
PAL/NTSC shift.  
AUDIO OUT  
2CH and 5.1CH analog audio output,  
Progressive Scan creates a picture signal  
with double the scan lines of  
a
conventional DVD, resulting in higher optical and coaxial digital audio output  
picture resolution and sharper image can be connected to any amplifiers.  
quality.  
GENERAL FUNCTIONS  
HIGH QUALITY PROPERTIES  
DIVX FUNCTIONALITY  
COMPATIBILITY  
DVD, CD, CD-R, CD-RW, MP3 and DivX  
discs compatible.  
Plays DivX5, DivX4, DivX3 and DivX  
ZOOM FUNCTION  
Video Content. (In compliance with DivX If desired, the picture can be enlarged to  
Certified Technical Requirements).  
further enhance your enjoyment.  
ALL PLAYBACK FUNCTIONS  
The maximum bit rate supported is 4  
Mbit/s. The average bit rate is 2 Mbit/s.  
Fast forward and reverse  
Slow playback  
HIGH RESOLUTION  
Frame playback  
MPEG2 decoding format to achieve Repeat playback  
horizontal resolution more than 500 lines. Program playback  
EXCELLENT TIMBRE SEARCH BY TIME  
Build-in Dolby Digital decoder to output Search for scenes by times; ideal for  
digital audio signal to reproduce high finding your favorite scenes.  
quality sound effects.  
SCREEN  
Supports 4:3 and 16:9 aspect ratios.  
SPECIAL FUNCTION  
LAST MEMORY PLAYBACK  
Continue playing from the last point you  
stopped.  
Supports multi-angle and multi-language  
playback for enjoying unique video  
features.  
- 4 -  
 
About Discs  
Disc Formats Supported by this Player  
The unit can play discs bearing any of the following logos:  
PLAYBACK TIME/  
PLAYABLE SIDES  
DISC LOGO  
DIAMETER  
133 min SS-SL  
242 min SS-DL  
266 min DS-SL  
484 min DS-DL  
DVD  
CD  
12cm  
12cm  
74 min  
8cm  
20 min  
MP3  
12cm  
600 min  
DIVX  
12cm  
The operating method of some DVD discs is specified by the software maker.  
Please refer to the instruction manual of the disc.  
The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but  
playback of CD-R or CD-RW discs created on a computer requires proper  
formatting and finalization of the disc for audio playback. Some computers and/or  
software programs may not be capable of creating compatible discs.  
About Disc Terms  
-
Title  
Generally, pictures or music compressed on a DVD are divided into several sections,  
“title”.  
-
Chapter  
The smaller section unit of picture or music in a DVD under the title, usually one title  
is comprised of one or more chapters and each of them is numbered for easy  
searching. But some discs may not have a recording chapter.  
Track  
-
A segment of picture or music on a CD. Each track is numbered for searching.  
- 5 -  
 
Care of Discs  
How to hold discs  
Cleaning Care  
When loading or removing discs, try not  
to touch their playing surfaces.  
Use a soft, dry cloth for cleaning. For  
stubborn dirt, soak the cloth in  
a
detergent solution; ring well first and  
wipe. Use a dry cloth to wipe it dry. Do  
not use any volatile agents such as  
benzine or paint thinner, as they may  
damage the surface of the player.  
Cleaning  
Lens cleaner  
Fingerprints or other dirt on the disc  
may affect sound and picture quality. To  
clean your discs, use a soft clean cloth  
to wipe them. If necessary, moisten a  
soft cloth with diluted neutral detergent  
to remove heavy dirt or fingerprints.  
The player’s pickup lens should not  
become dirty under normal use, but is  
for some reason it should malfunction  
due to soiling, contact your nearest  
WACA authorized service center. Lens  
cleaners are commercially available, but  
special care should be exercised in their  
use since some may cause damage to  
the lens.  
Do not wipe in  
a
circular direction  
(Concentric scratches in the disc groove  
tend to cause noise.) Gently wipe from  
the inside to the outer edge.  
- 6 -  
 
Elements of Operation – Front Panel  
1. Standby-on button  
-Press to turn off the power.  
2. Remote sensor  
-Receiving remote control signal for  
operation.  
7. STOP button  
-Press to stop playback.  
8. PREV button  
-Press to select the previous track or  
menu page.  
3. Display panel  
9. NEXT button  
-Indicates the current status of the  
unit.  
-Press to select the next track or  
menu page.  
4. Disc tray  
10. MENU button  
-Used to load disc  
-Press to display/close the menu.  
5. EJECT button  
-Press to open/close the disc tray.  
6. PLAY button  
-Press to begin the playback of the  
inserted disc.  
Display Panel  
9.  
- 7 -  
 
Rear Panel  
1. 5.1CH Audio output jacks  
2. 2CH Audio output jacks  
6. Video output jack  
7. Component (Y/Y, Pb/Cb, Pr/Cr)  
output jacks  
3. Coaxial digital audio output jack  
4. Optical digital audio output jack  
5. S-video output jack  
8. Switch between progressive and  
interlace scan  
9. Power-supply cord  
- 8 -  
 
Remote Control Handset Button Functions  
1. Power  
5. 10  
-Press to turn the DVD player on or off.  
2. Angle  
-Used corporately with 0-9 number  
buttons to select the track number more  
than nine numbers.  
-Press to access various camera angles  
(if the DVD contains multiple camera  
angles).  
6. Menu  
-Press to display/close the disc menu  
on the TV screen in Play mode.  
7. Direction buttons (/►▲/)  
-Used to select menu items or settings.  
8. Setup  
3. Audio  
-Press to access various audio  
languages (if the DVD contains multiple  
audio languages).  
4. 0-9 Number buttons  
-Select numbers by pressing these  
buttons.  
-Press to access the DVD player’s setup  
menu.  
- 9 -  
 
Remote Control Handset Button Functions  
9. Pause/Step  
19. Title  
-Press to pause playback or step frame  
by frame.  
-Press to display titles if present on the  
DVD disc.  
-Press PLAY button to resume normal  
playback.  
20. Enter  
-Press to confirm after selection.  
21. Zoom  
10. Reverse  
-Press to search backward.  
11. Forward ꢁ  
-When a DVD disc is playing, press this  
button to activate zoom.  
22. Stop  
-Press to search forward.  
12. Program  
-Press to stop playback, press the  
PLAY button to resume normal  
playback.  
-Allow you to play the disc in  
a
programmed sequence for certain discs  
(The button is not available for DVD,  
MP3 and JPEG discs).  
-Press the STOP button twice  
repeatedly to stop playback.  
23. Play  
13. Slow  
-Press to activate slow forward or slow  
rewind.  
-Press to begin playback.  
24. Next Skip/Scan  
14. Display  
-Press to skip to the next chapter/track.  
25. Previous Skip/Scan  
-Press to skip to the previous  
chapter/track.  
-Press to show the elapsed, remain  
playback time. Press to cancel on the  
screen text.  
15. Eject  
26. Repeat  
-Press to open or close the disc tray.  
16. P/N  
-Press to repeat a chapter, track, title, or  
all content (not available for MP3 and  
JPEG discs).  
-Press to select the TV system.  
17. Subtitle  
27. A-B Repeat  
-When a DVD disc is playing, press to  
select a subtitle language.  
18. Search  
-Press to mark a segment to repeat  
between A and B.  
28. Volume Up/Down  
-Allow you to select the desired disc  
starting time.  
-Press to increase or decrease the  
playing disc sound volume level slightly.  
-In DVD status, press to select the  
playback chapter or title (if the DVD  
contains multiple titles or chapters).  
- 10 -  
 
Usage of the Remote Control  
Battery Installation  
Do not mix old and new batteries.  
Wipe away any leakage inside the  
remote control unit, and install new  
batteries.  
Insert the batteries supplied while  
observing the correct (+) and  
polarities.  
(
)
If leakage should come into contact  
with your skin, immediately wash it off  
thoroughly with water.  
Batteries contain chemical substances  
and we recommend that you dispose of  
them properly and in compliance with  
any local regulations.  
Remote Control Operation Range  
Point the remote control unit from no  
more than about 23 feet from the  
remote sensor and within about 60  
degrees of the front of the unit.  
Service life of Batteries  
The batteries operation period  
normally last for about six months,  
although this depends on how often, or  
for what operations, the remote control  
is used.  
If the remote control unit fails to work  
even when it is operated near the player,  
replace the batteries.  
The operating distance may vary  
according to the brightness of the room.  
Notes:  
Use new “AAA” batteries.  
Notes:  
Do not point bright lights at the  
remote control sensor.  
Do not attempt to recharge,  
short-circuit, disassemble or heat  
batteries; do not throw them into fire.  
Do not place objects between the  
remote control unit and the remote  
control sensor.  
Do not drop, step on or otherwise  
Do not use this remote control unit  
while simultaneously operating on any  
other equipment.  
batter the remote control unit. This may  
damage the parts or lead to  
malfunction.  
a
- 11 -  
 
Connections  
Do not connect the power cord until all other connections have been made.  
Audio Connection: There are stereo audio output and coaxial digital audio output;  
Video Connection: there are video output and S-video output. You can choose  
anyone to connect.  
Connecting to a TV  
The connection is shown as following:  
1. In this figure, there are VIDEO OUT and S-VIDEO OUT. If the TV has S-VIDEO IN  
jack, you can achieve more vivid picture by connecting this jack.  
2. Setup of the DVD Player  
You can move courser to “TV TYPE” in “PREFERENCES” to select the corresponding  
color system depending on your TV connected.  
1) If TV system is PAL, set “TV TYPE” to “PAL” in “PREFERENCES” setup.  
2) If TV system is NTSC, set “TV TYPE” to “NTSC” in “PREFERENCES” setup.  
3) If TV system is MULTI, set “TV TYPE” to “MULTI. SYSTEM” in “PREFERENCES”  
setup.  
“PREFERENCES” is not available while a disc is playing. (During playback, press  
the STOP button twice repeatedly to stop playback completely).  
You can select any one of video out connections depending on the TV type.  
- 12 -  
 
Connections  
3. Y Cb Cr video connection  
If a display device with Y/Cb/Cr jacks is connected, then you should connect the jacks  
with three Y/Cb/Cr cables:  
1) Press the SETUP button to access the setup menu.  
2) Press the up/down direction buttons to select “VIDEO OUTPUT” in  
“PREFERENCES”.  
3) Select “YPBPR/YCBCR” in “VIDEO OUTPUT”, then press the ENTER button to  
confirm.  
IMPORTANT: Y/Cb/Cr uses interlacing. Please move switch on the rear panel to the  
location of “interlace” setting.  
4. Y/Pb/Pr connection  
If a display device with Y/Pb/Pr jacks is connected, then you should connect the jacks  
with three Y/Pb/Pr cables:  
1) Press the SETUP button to access the setup menu.  
2) Press the up/down direction buttons to select “VIDEO OUTPUT” in  
“PREFERENCES”.  
3) Select “YPBPR/YCBCR” in “VIDEO OUTPUT”, then press the ENTER button to  
confirm.  
IMPORTANT: Y/Pb/Pr uses progressive scan. Please move the switch on the rear  
panel to the location of “progressive” setting.  
- 13 -  
 
Connections  
Connecting to an Analog Amplifier  
- 14 -  
 
Connections  
Connecting to an Amplifier with 5.1 CH Audio Output  
Audio Connection: To experience the best possible sound from your DVD player, you  
should use the 5.1 channel audio connections. To do this, connect the 5.1 CH AUDIO  
OUT jacks on the DVD player to the corresponding AUDIO IN on your amplifier.  
Ensure that each channel is connected correctly. For example, the subwoofer output  
from the DVD player must be connected to the subwoofer input on your amplifier.  
Video Connection: Only one video connection is required. You may select one of  
video connection to your TV.  
Make some relevant setup in “SPEAKER SETUP”.  
You can select 2CH or 5.1CH during connection.  
You can select any one of video out connections according to your TV type.  
- 15 -  
 
Connections  
Connecting to an Amplifier with Dolby Digital Decoder  
If the amplifier has Dolby Digital decoding function, set the output format of digital  
audio signal in setup menu to “SPDIF/RAW”.  
An optical digital audio cable or coaxial audio cable (both optional) is required for  
these connections, as shown above. Only one connection is needed, not both at  
the same time.  
- 16 -  
 
Disc Play Operations  
Preparation After connection, turn on the power of relevant equipment and select  
video input.  
1. Turn on the player’s power  
Press the EJECT button on front panel to turn on the power and the player will search  
for the disc automatically. If there is a disc in, the player will play it.  
2. Press the EJECT button on front panel or the OPEN/CLOSE button on remote  
control to open the disc tray.  
3. Load the disc into the disc tray  
Load the disc into the disc tray with the disc label side facing up so as not to damage  
the player or the disc.  
4. Press the EJECT button or the OPEN/CLOSE button to close the disc tray and  
begin to play the disc.  
Warning: Do not play bad quality discs in order not to damage the lens.  
DVD Playback  
Menu  
Normally there is a selecting menu in a DVD disc. You can use the MENU button to  
enter the selecting menu directly, and use direction buttons to choose the item you like  
and press the ENTER button to enter it.  
Title & Chapter  
Normally there are several titles in a DVD disc, and also there are several chapters in  
a title. You can select any one of titles or chapters fast.  
Region Restriction Code (region code)  
Regional restriction codes are built in to DVD players and DVD discs for each sales  
region. If the regional code of the DVD player does not match one of the regional  
codes of the DVD disc, playback is not possible. The region number can be found on  
the rear panel of the DVD player.  
Language  
There are up to 8 kinds of audio languages in a DVD disc. When you play a  
multi-language DVD disc, press the AUDIO button on remote control to select a  
different audio language.  
NOTE: This function is only available for discs that have several audio bitstreams.  
- 17 -  
 
Disc Play Operations  
Subtitle  
The DVD player can support up to 32 kinds of subtitles. When you play a multi-subtitle  
disc, press the SUBTITLE button on remote control to select different subtitle.  
Angle  
The DVD player supports multi-angle function. Multi-angle means that a scene is shot  
from different angles so that audience can watch from any angle. If there are multiple  
angles in a scene, you can use the ANGLE button to select the angle you like to enjoy.  
Press the ANGLE button repeatedly to view different angle.  
Volume  
During playback, press VOL+ button to increase the volume and press VOL- button to  
decrease the volume.  
CD Playback  
The player will play all tracks continuously in default status. You can press the /ꢃ  
button or number buttons to select a certain track.  
MP3 Playback  
MP3 is an audio compression mode using Level 3 of the international standard MPEG,  
which compresses the audio signal at the rate of 12:1. Using MP3 format, one disc  
can record more than 600 minutes music, the timbre of which is similar with that of CD  
discs.  
There are many different formats for storing MP3 songs. Usually, one MP3 disc  
includes many folders (directories) and every folder includes several files (songs). Use  
the UP/DOWN direction button to select the directory you want and press the ENTER  
button to enter it. Use the UP/DOWN direction button to select the song.  
In playing status, you can use the /button to select other songs.  
The player can only output stereo signal when playing MP3 discs.  
There is no search by time and slow playback function for MP3 discs.  
- 18 -  
 
Disc Play Operations  
JPEG Playback  
JPEG is a common picture format that has few bytes and low loss rate of picture.  
Hundreds of pictures can be stored in a disc in this format. In order to realize real  
digital album, use film to make”PICTURE CD”, namely JPEG format.  
1. Normal Playback  
Load a JPEG disc in. After reading the disc, the display may show “SMART NAVI” and  
“ROOT” (the left is the menu of last level and the right is the menu of next level). Use  
the ENTER button and the Left/Right direction button to select submenu with picture.  
Use the Up/Down button to select the contents in the menu.  
Many discs have other contents besides pictures.  
2. Picture Rotation  
It can be operated when the picture is displayed. Once another picture is selected, it  
will be cancelled automatically.  
Press the right or left direction button one time. The displayed picture rotates 90  
degrees to the left or right depending upon the button pressed. To continue rotating  
the picture, keep pressing the direction button.  
3. Zoom of Picture  
You can enlarge a JPEG to see detail up close.  
Press the ZOOM button. The message ZOOM ON appears.  
Press the button, the view enlarges to 150%. Pressing the button repeatedly  
steps through 150% and 200%. To resume normal enlargement, press the ZOOM  
again.  
Press the STOP button to return to root menu.  
- 19 -  
 
Playback Functions  
Stop  
During playback, press the STOP button on remote control to stop playback. For DVD  
discs, after pressing the STOP button once, if you press the PLAY button, then the  
player will play from the stopped point.  
Pause  
Press the PAUSE/STEP button on remote control to pause, and press it repeatedly to  
achieve step-by-step playback.  
Repeat  
1. Use the REPEAT button to repeat a title, a chapter, a track and a disc respectively  
according to different discs, and also to cancel repeat.  
2. Use the A-B button to repeat section A to B. Press it once to set the starting point  
A, twice to set the ending point B, and the third time to cancel repeat.  
Some discs do not support repeat function.  
Search By Time  
You can use the SEARCH button to search by time, namely to play from a specific  
time. During DVD playback, press the SEARCH button once and TV screen will  
display the title or chapter, then you can use number buttons to select any one of them.  
Press the SEARCH button twice, then you can use number buttons to input the time  
you desired (hour, minute, second), and the player will play from the inputted time.  
Some DVD discs do not support search function.  
Fast Forward & Rewind  
Press the /button to activate fast forward or rewind.  
Slow Forward & Rewind  
Press the SLOW button to activate slow forward and rewind.  
There is no slow playback function for CD and MP3 discs.  
Disc Information Display  
Press the DISPLAY button on remote control to display the disc information.  
Play  
Press the PLAY button to start playback. Press the POWER button on remote control  
to enter standby status, and press it again to resume back to playback status. If there  
is no operation for a long time, the player will automatically enter screen saver status  
and then enter standby status.  
- 20 -  
 
Playback Functions  
Program Playback  
Use the PROGRAM button to activate program playback of CD discs.  
Operation steps:  
1. Press the STOP button on remote control to stop playback.  
2. Press the PROGRAM button to enter program status.  
3. The player display may show “PROGRAM P00:00”. Use number buttons to input  
your favorite song numbers.  
4. Press the PLAY button to begin the program playback.  
Zoom Function  
Use the ZOOM button on remote control to activate zooming out and zooming in  
function.  
Press the ZOOM button to achieve cycle of the following functions:  
1.5X  
2X  
3X  
Normal  
There is no zoom function for CD and MP3 discs.  
- 21 -  
 
System Setup  
SETUP MENU  
Press the SETUP button on the remote control to display a main menu: GENERAL  
SETUP, SPEAKER SETUP, AUDIO SETUP and PREFERENCES.  
Operation steps:  
1. Press the SETUP button to enter the main menu.  
2. Use the , direction button to select the item you want to set and press the  
ENTER button to enter it.  
3. Similarly use the , direction button to choose one item in submenu, use the ►  
button to enter it.  
4. Use the , direction button to choose the content as you wish. Press the  
ENTER button to confirm, the button to return to submenu, the , direction  
button to select “MAIN PAGE” and the ENTER button to return to main menu.  
5. Press the SETUP button to exit from the setup menu.  
“PREFERENCES” is not available while a disc is playing. (During playback, press  
the STOP button on remote control twice repeatedly to stop playback completely).  
GENERAL SETUP  
The general setup is shown as following:  
1. TV DISPLAY (NORMAL/PS, NORMAL/LB & WIDE)  
The player allows you to set the best screen proportion depending on the disc.  
2. PIC MODE (AUTO, FILM, VIDEO, SMART and SUPER SMART)  
You can set different picture depending on your desire.  
3. ANGLE MARK (ON & OFF)  
Some chapters of DVD discs include many different angles information. If the angle  
mark is set to be “ON”, then there will be a multi-angle mark displaying on the screen  
when playing the contents with multi-angle. Here, you can use the ANGLE button to  
enjoy different angles. If the angle mark is set to be “OFF”, then there will be no angle  
mark on the screen.  
4. OSD LANG (ENGLISH, CHINESE, FRENCH, & SPANISH)  
Please select preferred language for the OSD menus.  
5. CAPTIONS (ON & OFF)  
Some DVD discs have hidden captions. You can choose captions on or off on screen  
during playback.  
6. SCREEN SAVER (ON & OFF)  
You can select “ON” to activate screen saver at the time of no operation. Select “OFF”  
to turn off this function.  
- 22 -  
 
System Setup  
SPEAKER SETUP  
1. DOWNMIX (LT/RT, STEREO and 5.1CH)  
Selecting “LT/RT” in the “DOWNMIX” will alter the audio output into a mixed Dolby  
output.  
By selecting “STEREO” in the “DOWNMIX”, the player will output a normal stereo  
signal.  
By selecting “5.1CH” in “DOWNMIX” will alter the setup of center and rear speakers.  
2. CENTER, REAR and SUBWOOFER (ON and OFF)  
Allows you to select “ON” or “OFF” for the center, rear and subwoofer. Only when  
DOWNMIX is in “5.1CH” status, the setup of center, rear and subwoofer speakers can  
be carried out.  
3. CENTER DELAY, REAR DELAY  
Having activated the center and rear speakers, now you should set “CENTER DELAY”  
and “REAR DELAY”.  
4. TEST TONE  
This function is available only as the “DOWNMIX” is in “5.1CH” status and the disc is  
not loaded.  
AUDIO SETUP  
1.SPDIF (OFF, SPDIF/RAW & SPDIF/PCM)  
This item is used to set the format of digital audio.  
“SPDIF/RAW” outputs the original. For example, if a disc being played is Dolby Digital,  
then the digital audio is also Dolby Digital.  
”SPDIF/PCM” means that PCM channel signal is output to speakers that has only  
two output channels.  
2. OP MODE (LINE OUT and RF REMOD)  
Select “LINE OUT”, and then it will do linear process to audio signal during audio  
decoding.  
Select “RF REMOD”, and then it will do RF process to audio signal during audio  
decoding.  
3. COMPRESSION  
You can adjust linear dynamic compression rate to achieve different compression  
effects.  
4. LPCM OUTPUT (LPCM 48K & LPCM 96K)  
There are two kinds of sampling frequency for selection.  
- 23 -  
 
System Setup  
PREFERENCES  
You can set preferences for the following features:  
1. TV TYPE (MULTI.SYSTEM, NTSC & PAL)  
You can select relevant system depending on your connected TV type. It is originally  
set in NTSC.  
2. VIDEO OUTPUT (S-VIDEO, YPBPR/YCBCR & RGB)  
You can choose the appropriate video output.  
3. AUDIO, SUBTITLE and DISC MENU (ENGLISH, FRENCH, SPANISH, CHINESE &  
JAPANESE)  
There are several audio, subtitle and disc menu languages in some DVD discs. If  
there is no preset in the disc, then the set language will have the priority to be played  
first.  
4. LOCALE (CHINA, FRANCE, HONG KONG, JAPAN, TAIWAN, GBR & USA)  
As for the disc with local limitation, you can choose the region.  
5. PARENTAL  
DVD discs with parental function are divided into several levels. You can select  
relevant level depending on the disc and your desire.  
6. PASSWORD (CHANGE)  
1) Press the ENTER button to enter password change page.  
2) Press the number buttons to input the old password 3308.  
3) Press number buttons to input the new password.  
4) Repeat it for safety confirmation.  
5) You close this procedure by pressing the ENTER button.  
7. DEFAULTS (RESET)  
Choose “DEFAULT” and confirm “RESET” if you want to recall the factory settings.  
8. SMARTNAVI (NO MENU and WITH MENU)  
You can select NO MENU or WITH MENU for playback. For example: Select NO  
MENU in SMARTNAVI. Load a MP3 disc in, after searching, press the PLAY button to  
active playback, also you can use the number buttons to select the desired track.  
Select WITH MENU, then OSD will display selected menu after reading. Please refer  
to the operating methods on MP3 playback in this user’s manual.  
“PREFERENCES” is not available while a disc is playing. (During layback, press  
the STOP button on remote control twice repeatedly to stop playback completely).  
- 24 -  
 
Troubleshooting  
Symptom  
Check Item to See If:  
-disc tray is closed.  
-disc is loaded.  
-disc is dirty or warped. If it is, clean it or press it.  
-the player’s region code is the same as region code of  
DVD disc.  
-water condensation has occurred. If it has, remove  
disc and leave player on for several hours.  
The player cannot play.  
There is no sound.  
-system connection is correct.  
-the speakers are plugged in.  
-the sound setup of DVD disc is correct.  
-disc is dirty or warped. If it is, clean it or press it.  
-TV is turned on and in correct video mode.  
-system connection is correct.  
There is no picture.  
Poor AV performance.  
-disc is dirty or warped. If it is, clean it or press it.  
-it is in A-B repeat status.  
-it is true, press A-B button to cancel it.  
-disc is dirty or warped. If it is, clean it or press it.  
Cannot continue to play and  
play a section repeatedly.  
-there are obstructions between the remote control and  
the player.  
The remote control does not -the remote control is pointing at the player.  
work.  
-batteries are correctly inserted or the polarity is  
correct.  
-batteries are weak. If they are, replace your batteries.  
Others:  
Static or other external interference may cause the player to function abnormally. In  
this circumstance, unplug the power-supply cord from the outlet and plug it in again to  
reset the player so that the normal operation can resume. If you are still having  
problems, then please disconnect the power and consult your service center or a  
qualified technician.  
- 25 -  
 
Specifications  
Laser Wavelength  
Wavelength: 780/650nm  
PAL/MULTI/NTSC  
20Hz 20kHz ±2.5dB  
85dB  
Video System  
Frequency Response  
Audio Signal-to-noise Rate  
Audio distortion + noise  
Channel Separation  
Dynamic Range  
-70dB 1kHz  
70dB 1kHz  
80dB 1kHz  
0.2  
1.0  
Analog Audio Out  
Out Level: 2V±  
,
Load: 10kΩ  
Audio Out  
Digital Audio Out  
Video Out  
Out Level: 0.5VP-P  
,
Load: 75Ω  
Out Level:1VP-P±0.2, Load:75Ω  
Unbalanced Negative  
Video Out  
Power  
Out Level: Y: 1VP-P, C: 0.286VP-P  
S-Video Out  
Load 75Ω  
AC120V ~ 60Hz  
Power Consumption 25W  
Dimension  
Weight  
348 mm×240 mm×65 mm  
About 2.8kgs  
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.  
Confidential unpublished works. © 1992 -1997 Dolby Laboratories.  
All rights reserved.  
- 26 -  
 

Peavey DJ Equipment 4B User Manual
Philips Camcorder NV GS120EB User Manual
Philips Clock Radio AJ130 37 User Manual
Philips DVD Player BDP5200 User Manual
Philips Flat Panel Television LCD FLAT TV User Manual
Philips Projection Television 55PP9401 User Manual
Philips Speaker DS8550 User Manual
Pioneer Car Video System X EM21V User Manual
Polaris Jet Ski 2003 MSX User Manual
Pride Mobility Mobility Aid Sidekick User Manual